I'm sorry, but this product is outdated and no longer supported. This is just a sale of stock as it is, so I will no longer add new items for sale. This is mainly due to very difficult production and quality requirements. Assembling one piece takes about an hour and it is very laborious. Therefore, this product is no longer being developed and will be replaced in the future by a new version, which will only be sold assembled.

It's a small Pogo pin ISP programmer adapter. It allows you to program your AVR project without to solder ISP header and reduce space on PCB.

It is used to program AVR Atmel ATmega, ATTiny microcontrollers.

There are two options of pogo pins.

• P50-E2 - Recommend for ISP connectors with holes.
• P50-B1 - Recommend for ISP connectors with small vias or pads without holes/vias.

Details:

• 6pin (2x3) straight IDC Male Socket spacing: 2.54mm / 0.1 inch / 100 mil
• Pogo pin spacing: 1.27mm / 0.05 inch / 50 mil
• Compatible with Atmel ICE Basic (require ATATMEL-ICE-CABLE), USBasp programmers

Included:

Kit (as photo):

• 1x - PCB (Thickness 0.8mm)
• 7x - Spring loaded Pogo pins (Depends on the variant - P50-E2 or P50-B1)
• 1x - 6pin (2x3) straight IDC Male Socket
• 1x - 10mm long heatshrink tube

Assembled PCB (as photo):

• 1x fully assembled adapter

Read this before ordering!

Kit:

Video or instructions for assembling the kit is not available now. I recommend using a solder paste and hot air gun. It's for experts! It's a real challenge.

Assembled PCB:

Assembled version is handmade assembled. So one can expect that it will not be perfect. But it is as good as it can be (as photo). If you don't accept it, you need to buy a kit and do it yourself.

Spacing 1.27mm are only not guaranteed, there is little tolerance.

Pogo pins are very close to each other. Beware of short circuits. I recommend using a USB isolator or ISP programmer with short-circuit/overload protection.

Return Policy:

Pogo pins are fine and prone to rough handling. The return does not apply to mechanical damage. If you buy a Kit, be careful if you overheat the PCB and peel off the copper, damage the pogo pins (sealed with flux, soiled with tin...) we are not replacing or return.

More Info:

Open source, see Link to Source Code. Eagle library and footprint is ready to use on Github.