Description

How to connect Marine Electronics to WiFi

How to connect a boat's electronics to 2-day WIFI

The A033 gives you complete freedom to monitor, navigate and control from anywhere on board.

Simple yet sophisticated, the QK-A033 NMEA multiplexer gives you:

Effortless combined data from multiple NMEA, SeaTalk, WiFi and USB devices.
Convenient viewing of your combined marine data wirelessly anywhere on your boat to your chart plotter or mobile phones, tablet and laptop.
Seamless communication with Autopilots and other NMEA devices through 2 way WiFi and USB connectivity.
Flexible routing and filtering options.

The internal SeaTalk converter allows the A033 to listen on the SeaTalk bus and convert SeaTalk data to NMEA messages.

Typical System Configuration

Through advanced filtering and routing, the A033 NMEA enables controlled routing of data to specific outputs, blocking of excess data and overflow reduction.

Without Configuration: The multiplexer converts and combines data received on the listener ports and sends this data to all talker ports, WiFi and USB simultaneously.

Routing options: The powerful routing feature allows the NMEA, SeaTalk and WiFi input data to be routed from any input to specific outputs.

Filtering options: Each input also has a flexible filter that can be configured to pass or block specific sentences. This frees up bandwidth, significantly reducing the possibility of data overflow and resulting loss of data.

Bi-directional WiFi: 2 way WiFi and USB connectivity, the A033 allows for wireless connection to autopilots and other NMEA devices, giving you the freedom to navigate, monitor and control from your iPad, iPhone, Android tablets and other WiFi enabled devices.

Up to 4 devices can connect directly to the A033 wirelessly with no need for an access point.

WiFi Connection

The WiFi module is set for direct Ad-hoc WiFi connection as default, with no need for a router. The SSID and password can be changed through QK-A033 configuration software, increasing security and memorability. Up to 4 wireless devices can connect directly to the A033 in Ad-hoc mode.

QK-A033 can also be connected via Station mode using the Configuration software. This allows for greater range and remote access, as well as additional multi-device access.

The WiFi can be placed on standby if desired.

Features
Simple, yet sophisticated NMEA 0183 multiplexer
Converts Seatalk to NMEA 0183
Multiplexer: Combines  up to 3x NMEA 0183 , 1x Seatalk, WiFi and USB data
Combined data stream can be accessed wirelessly (WiFi) or through the USB or NMEA ports
Bi-directional USB/WiFi allows for communication with autopilots and other NMEA devices
LED lights provide status information

More technical info

Configurable baud rates: (4.8, 9.6, 38.4k input and output)
Wide power supply voltage range: DC 9-35 Volts
Compatible with Chart plotters, Windows, Mac OS X, Linux systems (Full functionality, though configuration is through a Windows application)
Compatible with Android and iOS (All functionality excluding USB connection and Configuration) Galvanically isolated NMEA and SeaTalk input ports. (also called opto-isolation. Galvanically isolation prevents unwanted currents between devices, preventing equipment damage and interference with radio signals) Differential NMEA output with galvanically isolated protection
Connectable to older RS232 products through optional Protocol Bridge (AS03). For more information, read below

FAQ – How to connect NMEA0183 RS422 to older RS232 devices.

This product uses the NMEA 0183-RS422 protocol (differential signal), however some older chart plotters or instruments may use the older NMEA-RS232 protocol (Single-ended signal).

To ensure A033 compatibility with any older NMEA0183 device, check if your device uses NMEA0183 RS422 or RS232

NMEA0183 RS422 devices’ wiring is compatible ‘out of the box’
NMEA0183 RS232 will require a Protocol Bridge (AS03) to connect your wiring

Connecting the A033 to an older (RS232) instrument or chartplotter is not a problem, simply order the QK-AS03 Protocol Bridge. Our QK-AS03 Protocol Bridgeconnects NMEA-RS232 wiring to MNEA0183-RS422 and vice versa, using a simple ‘Plug ‘n’ Play’ connection, with no setup or configuration needed.

You will probably need an AS03 if you are connecting to an older Garmin, Raymarine or Standard Horizon device. The easiest way to check, is to look at the input/output connections on the device that you will connect the multiplexer to. If the input/output connections on your device (Chart plotter, depth reader, etc.) have a TX, RX or GND connection, use a protocol bridge.

If in doubt contact us for advice.

AIS Receiver comparison guide

Multiplexer comparison guide

What’s included?

1 x QK-A033
1 x USB-B cable (1m)
1 x CD containing Manuals, Configuration Software and drivers 1 x Setup Guidebook

Available to add to your order:

QK-AS03 NMEA Protocol Bridge (only needed if connecting to RS422 devices)

FAQ: Multiplexer comparison guide

Help and Support Note: This product has been well tested in the UK before dispatching to customer. Please make sure you understand how to use it before purchasing from us. For international shipping, VAT and other import or handling fees may be applied by your local customs. These are the responsibility of the recipient. We will always declare the purchase price excl. shipping. All technical questions please email to info@quark-elec.com. Alternatively, you can visit Quark-elec forum to find your answer.

Returns policy We have a 30 days refund policy. We will accept returns within 30 days, however, please be aware the buyer pays the return postage. If you do not accept these terms, we will not be able to refund the product F or fast Customs fee-free Shipping to Canada/USA visit http://distributionnautique.com/store/p20/Multiplexer_A033_Bidirectional.html

Click Here for all our Marine Products the product.