What is it?

This item is an Infrared Remote Control Decoder. There are two modes of operation, Terminal Mode or IRWidget Mode.

In Terminal mode, the decoder works with a simple terminal program. Select protocol from the list, point your remote at the decoder and press any key on your remote. The decoder will display the Device ID and the Command from the key you pressed. It is very easy and it JUST WORKS. No complicated data to see, just the necessary information.

By installing jumper J1, the Infrared Remote Control Decoder is now an IRWidget and will function with various freeware programs available for download.

Why did you make it?

Every example source code I found does not decode most of the protocols correctly. They display the bits as they are received and do not arrange the bits correctly, presenting the proper command and system ID of the remote. Many of the protocols are received bit by bit, LSB first. This decoder will re-arrange the bits in the correct order and display the data to the terminal.

WHY do you want to know your remotes commands? Backing up this data is a good idea if the remote were to become inoperable or lost. If your spouse drops the remote numerous times a day (like mine does) or your dog likes to use the remote as a play toy, a backup is crucial. By knowing the command and the device id for a remote, you can use this data to program other re-programmable universal remotes.

What makes it special?

It's easy to use, just use Teraterm @ 115200 bps. Create a log file and back up all of the commands to your favorite remotes. This decoder will decode the following infrared protocols: NEC1, NEC2, REC80, Dish, RECS80, Sony12, TDC-38, RC5 and RC6. There are two modes.

1. Basic mode. This mode displays the basic information. The Command and the System ID.

2. Advanced or Expert Mode. This mode displays all of the decoded information the remote transmits.

If you are purchasing this item, please check your Tindie email for user guide links and all necessary instructions.