This is a SRAM card that goes in the PCMCIA Slot of the A600 or A1200 machines and adds 4mb of fast ram.

Because of the fast SRAM chips thats directly accessible to the CPU you actually end up getting a faster machine, about 50% faster then stock in sysinfo 4.4.

Cards are set up to be used as fastram and will show up at boot, no drivers needed, just plug&play.

I am using the case of a cheap CF to PCMCIA adapter to host the SRAM card, taking these apart is a bit tricky and they dont always com apart perfectly, but it will protect you from plugging in the card incorrectly or shorting any components.

All cards have been tested fully using amiga test kits memory test.

The pcb itself is much shorter then the case, if you want to you can cut the case down to about half lenght so it does not stick out as much.

This is a open source project by f1ac0 read more about the project here : https://github.com/f1ac0/PCMCIA-SRAM