IMPORTANT! The Raspberry pi ZERO needs to be mounted with components facing upwards ( like on image3) this is different from most other RGBtoHDMI models and was made to give better access to the hdmi port.

RGBtoHDMI is a open source project that allows you to convert analog rgb signals in old computers to a modern, super-sharp, digital HDMI signal.

This variant was designed by nobodyisinocent and was made to take up the least amount of space possible to allow it to fit together with a vider selection of accelerators and expansions.

It uses a CPLD and does not suffer from the "sparkling pixel" issue that some earlier 74-series based boards did.

A cable with push button to access the settings menu is included.

This model is suitable for A500 and A500+, other amiga models have their own designs.

You will also need the following that is not included: Raspberry PI Zero / Zero2 Micro SD card for the software * Cable with Mini HDMI ( not fullsize or micro hdmi ). or a adapter.

Read more on these websites: https://github.com/nobodyisinocent/RGBtoHDMI https://github.com/LinuxJedi/AmigaRGBtoHDMI/tree/main/Amiga500CPLD

Has round pins

IMPORTANT!!! Install everything like in picture 3, otherwise you might damage the PI or the amiga itself. i will not take responsibility if you do, so double check!