This is a new Open Source Projects that uses a Raspberry PI Zero to give the amiga Sharp HDMI output

This variant is made for Amiga A2000 and A3000 with a Video Slot.

Comes with a Push button and cable to access OSD menu with settings.

Works with both Denise ( 8362 ) and SuperDenise ( 8373 ), it is IMPORTANT that you check wich version your computer have and set the jumper on the adapter correctly before you start up uour machine!

Except for this adapter you will also need the following that is not included: 1pcs Raspberry Pi ZERO with pinheader, either version should work 1pcs MicroSD Card for the software ( software is only few mb so size isnt important ) 1pcs Mini HDMI to HDMI adapter or cable ( MINI not Micro )

read more on the projects github page here: https://github.com/Bloodmosher/Amiga-VideoSlot-RGBtoHDMI and https://github.com/c0pperdragon/Amiga-Digital-Video

IMPORTANT! install everything as shown in picture 2, if you install the adapter or raspberry pi in the wrong direction you can damage your machine or the adapter itself!

There are two pinheaders where you can connect the button depending on if you want to reach it from the front of the computer or the back.

Bracket is not included and will have to be 3d printed or modified from an old one if you wish to mount button and hdmi cable.

Shipped from sweden.