What is it?

DIP BOARD, a bread board but using dip switches.

Originally designed this module for testing purposes, I needed a way to reconfigure the pin layout on the fly but was sick of the mess of dupont connectors.. so I came up with the DIP BOARD. It just looked too cool to keep to myself, so here it is.

Total overkill for what I use for it, but did I mention it has dip switches? Like tons of them, Who doesn't love dip switches!

Seriously tho, it's as easy as flipping a dip switch to your desired pin position (listed on the bottom right of the silkscreen), the SPI module pins are labeled around the header.. too easy. It's one board to rule all modules.

As an example in the product images (image 3) I have pin 1 configured as GND (dip 1 - position 8), pin 2 as VCC (dip 2 - position 1), pin 3 as B6 (dip 3 - position 6).. I'm sure you get the point.

Features

• Dip switches
• Dip switches
• Oh more dip switches
• 5V / 3V VCC selector (yellow jumper)
• Compatible with all modules.

Additional info

Do not attach GPIO module's to a powered on Flipper Zero, turn the flipper off, attach the module & power the flipper back on.. attaching a GPIO module while the flipper is powered on can corrupt your SD card.

Sale is for GPIO module only.

DIP BOARD has been designed, hand built and tested by me personally.

Made with ❤ in AUS.