Game Over Flipper Zero Wifi GPIO Module

Name: Game Over Flipper Zero Wifi GPIO Module
SKU: 31680
Price: 132.00 USD
Availability: InStock
Rating: 4.92 (12 reviews)

(12 Reviews)

flipper zero wifi gpio module oled esp32 s3 (wifi) cc1101 (subghz) nrf24 (2.4ghz)

Designed by ruckus // section80 in Australia

Game Over Flipper Zero Wifi GPIO Module 1

Game Over Flipper Zero Wifi GPIO Module 2

Game Over Flipper Zero Wifi GPIO Module 3

2023-08-30T04:41:19.316Z-GameOverManual.png

Buy with confidence.

Our Tindie Guarantee protects your purchase from fraud. Learn More

flipper zero wifi gpio module oled esp32 s3 (wifi) cc1101 (subghz) nrf24 (2.4ghz)

What is it? GAME OVER, the successor to the end game. The GAME OVER is an all-in-one GPIO board with an OLED screen, it does it all. The board comes pre-flashed with Wifi Marauder and is ready to go…

What is it?

GAME OVER, the successor to the end game.

The GAME OVER is an all-in-one GPIO board with an OLED screen, it does it all.

The board comes pre-flashed with Wifi Marauder and is ready to go right out of the box. An expansion slot that can be used for either a CC1101 (used for external subghz at extended ranges ~ both 433mhz & 900mhz) or a NRF24 (used for 2.4ghz mouse jacking) module.

GAME OVER runs a custom version of Wifi Marauder designed specifically for this board and displays all relevant information on the OLED screen in a very clean layout. (If you've ever used the Flipper Zero for Wifi Marauder operations you would know how awkward and congested the flipper screen can be). The OLED screen makes navigating and interacting with Wifi Marauder a breeze.

You can start Wifi Marauder scans/attacks right off the GAME OVER board itself or use the Flipper Zero to control it remotely.

Features

Power efficient OLED screen.
External antenna connector.
Recessed reinforced expansion module header (nice snug fit for CC1101 or NRF24).
Joystick navigation (up, push, down).
Boot & restart buttons (used for flashing).
RGB status indicator (attack/sniffing status in wifi marauder).
RX/TX LED indicators.
Micro-SD card reader (save .pcaps of sniffed traffic in wifi marauder).
Supports flashing the ESP32-S3 directly from the flipper zero using USB-UART bridge.
Compatible with the wifi marauder companion flipper app, allowing you to control the ESP32-S3 directly from the Flipper Zero.
Compatible with flipper zero silicone cases.

Module compatability

Any module that uses the following pin-out is compatible, currently tested & confirmed modules: CC1101 & NRF24.

Row 1	Row 2
1: GND	2: 3V3
3: B2	4: A4
5: B3	6: A7
7: A6	8: 1W

Firmware

Firmware will be available using: dirty_flasher (BETA)

Additional Info

If no additional options has been selected, the sale includes the GAME OVER module & 3D printed case only. Product images displaying modules/antennas are for demonstration purposes only.. flipper zero is not included with sale.

GAME OVER has been extensively tested on the Flipper Zero running the latest Unleashed firmware, compatibility with other third-party firmware has not been tested.. Any forks of Unleashed (RogueMaster's for example) should be completely compatible tho.

Do not run any modules without a antenna attached, you will damage them.

GAME OVER has been designed, hand built and tested by me personally.

Full credit to justcallmekoko for wifi marauder firmware: GitHub

Made with ❤ in the land down under.

No country selected, please select your country to see shipping options.

Change Destination Country:

Review Breakdown

Average Ratings

Product: (4.92)

Documentation: (4.92)

Shipping: (5.00)

Communication: (4.83)

Mel | Oct. 3, 2024

Perfect.

Excellent product, excellent quality, would highly recommend this seller. The board is well made and is simple to understand.

Ashok | Sept. 4, 2024

Great device, awesome, except for SD card

So I bought this board about 3-4 months back, and it worked perfectly fine for about 3-6 hours. Until the SD card reader randomly stopped working. I tried everything: reinserting, cleaning the slot, reflashing, and nothing worked. Especially the part where I tried flashing dev board firmware on the board; I got so scared because I didn't know the product description and firmware, bootloader, partition table, flashing app, etc., were under the product image, which makes this product deserve five stars. After finding the firmware for the board and reflashing, the SD card reader still wasn't working, and I couldn't fix it at all. Other than that this board is incredible.

Response from ruckus // section80 | Sept. 18, 2024

Hello, thank you for taking the time & writing this review.

There is a known issue with newer Sandisk branded microSD's, this is an upstream espressif API issue and not related to the board at all. It should eventually be fixed. Some Sandisk cards work fine, others fail to mount.

Lexar & Kingston branded microSD's are known working cards, I recommend using these.

Ben | April 27, 2024

Great Ozzie store, well packaged.

Beautiful workmanship, packing was fantastic and extremely quick postage.

If only my flipper had arrived before hand.

Alex | April 27, 2024

Loved it!!

Really enjoyed this addon for my flipper zero does exactly what it says . It scans ap's super fast and efficiently thank you

Alexander | March 27, 2024

Best module I ever brought

Brought it to mess with my friends they where annoyed at first but interested afterwards, also I wish there was other include antennas like 433mhz and 900mhz but there easy to find online, all in all very good module for the F0, game over is better then the mayham V2 in my opinion

Heriberto | Feb. 14, 2024

Holy shit!

This seller is a master of crafting these. Every detail put into the pcb, case and overall design is amazing and the custom sheilded cc1101 modules sold by this vendor are very nicely done and go well with this module. Running the module and going through flipper runs smoothly and probably has good work flow capabilities ill have to try out. Following instructions on the product description was a huge help. Couldn't be happier with this buy. Many thanks to Uncle Ruckus!

Joshua | Feb. 5, 2024

Absolutely perfect.

I was concerned due to the distance my item was going to have to travel but everything down to the way the items were packaged was extremely well thought out. The quality, precision and creativity of this module is amazing. If you don't have one get one.

Justin | Jan. 24, 2024

Great experience | USA

Ruckus was extremely helpful with any and all questions I had about the product. Module is well built, haven't had any issues yet and don't expect to. :)

Federico | Nov. 9, 2023

Exactly as described

Arrived in perfect condition from Australia to Uruguay, very well packaged. Everything works great. Thank you.

Albert | Oct. 21, 2023

Game Over Flipper Zero Wifi GPIO Module AWESOME 😍

First 🎮 Game Over Flipper Zero Wifi GPIO Module I have purchased. When I received it the packaging was Very well Protected 🫶. Also the Quality is so Clean 😎. The Function of the unit is so easy to work with back and forth with the Flipper 🐬. I would recommend 👉 Game Over Flipper Zero Wifi GPIO Module 👈. It is so clean with the Transparent Flipper. AWESOME LOVE IT wish I can share pics 😜🤪😋

John (Jmfl) | Oct. 17, 2023

Just another amazing product

Thanks for another banger! These things are perfect, standalone or operated by the app. Attack wifi while playing tetris....yes please :)

Adam | Sept. 28, 2023

Screen is Genius

I have been pounding away at this thing for a bit now, and I think I know the real genius of this product. You can start WIFI scans with the Flipper, select a target on the screen, then start the attack with the flipper. I know it sounds odd, but if you follow it, it works so well and efficiently. LED lights are red and blue. They light up according to what you are doing. This things design is amazing. With the case, cool digital logo and 8-pin add on slot, this is a good one to cary around in your bag.

+ Show 7 more