MakerPad Pro is the ultimate SmartScreen Hub designed to revolutionize your IoT projects. Powered by the ESP32 which is a WiFi + Bluetooth module chip suitable for interesting DIY electronics projects.

The MakerPad Pro is equipped with a vibrant touchscreen display boasting a resolution of 320x480 and a size of 3.5 inches. With 65k colors and a brightness of 280 Cd/m2, it offers exceptional visual quality for various application scenarios. Whether you're using it as a handheld or pocket terminal, the MakerPad Pro's display provides a user-friendly interface for enhanced interaction and control.

To further enhance its capabilities, MakerPad Pro features a high-resolution 2 MP front-facing camera. The camera enables advanced functionalities such as face/object/scene recognition. This adds a new dimension of creativity and opens up exciting possibilities for cutting-edge projects.

Features:

• ESP32-WROVER-B module which generic Wi-Fi + Bluetooth + Bluetooth LE MCU module that targets a wide variety of applications
• Camera for photography-related applications
• Capacitive Touch Display 3.5” for user interaction
• Onboard micro SD card storage support for Data logging
• Buzzer for adding audio alert for project
• Type C interface for programming/power
• GPIO pins break for interfacing additional peripherals if the camera is not used
• Boot and Reset Button
• Open-source LVGL is supported for designing rich GUI for embedded applications.

Specifications:

• MCU: ESP32-WROVER-B contains low-power Xtensa 32-bit LX6 microprocessors
• Memory: 448 KB of ROM, and 520 KB of on-chip SRAM, with 8MB flash and 8MB PSRAM
• WiFi Protocols: 802.11 b/g/n
• Bluetooth: v4.2 BR/EDR and Bluetooth LE
• Camera: OV2640, built-in having 2M pixel with lens 1/4"
• Camera Supports Image Sizes: UXGA, SXGA, SVGA, and any size scaling down from SXGA to 40x30
• Display Resolution: 320x480 pixel
• Display Color: RGB, 65K
• TFT LCD Driver: ILI9488
• Capacitive Touch Panel Controller IC: FT6236 Series

Box Content: - 1 x Makerpad Pro

Note: Black Enclosure is optional!