Raspberry Pi Pico 4G Expansion is a Quectel EG25-G module-based 4G Expansion board that includes an LTE category 4 modules, built-in WiFi, multi-constellation GNSS, USB 2.0 High-Speed Interface.

Pico 4G Expansion supports maximum downlink rates of 150Mbps and uplink rates of 50Mbps over LTE, while backward compatibility with current 2G networks guarantees connectivity even in places where 3G or 4G coverage is not available.

Pico 4G Expansion also includes a 1.14-inch display with a resolution of 240 x 135 pixels, 65K RGB colors, and a sharp and vivid exhibiting effect, designed primarily for user engagement via SPI connection by incorporating a GPIO header. The 1.14-inch LCD includes the ST7789 Driver and SPI Interface, decreasing the amount of IO pins required.

Features:

• Inbuilt 1.14" LCD
• Low Power Consumption
• Max. 150Mbps downlink /50Mbps uplink under LTE
• Feature refinements: supports DFOTA, eCall and DTMF*
• MIMO technology meets demands for data rate and link reliability in modem wireless communication systems

Specifications:

• Operating Voltage - 5V(via USB)
• Communication - UART/USB 2.0
• Module - Quectel EG25-G
• Compatibility - Raspberry Pi Pico
• Operating Temperature - -400 ' 800 C
• Coverage - LTE, UMTS/HSPA. and GSM/GPRS/ EDGE (Worldwide)

Kit Content:

• 1 x Pico 4G Expansion Board
• 1 x 4G Expansion Antenna
• 1 x GPS Antenna
• 1 x SMA To UFL connector

Note: Raspberry Pi Pico is not included!