LoRa™ HAT, a low-power consumption data transmission module, comes with an onboard CH340 USB TO UART converter, Voltage Level Translator(74HC125V), E22-900T22S and E22-400T22S SMA antenna connector, IPEX antenna connector, LoRa™ Spread Spectrum Modulation technology with auto multi-level repeating.

Features:

• Communication range up to 5 KM
• Supports auto repeating to transmit longer
• Low Power Consumption
• Highly Secured
• For Evaluating signal quality with the RSSI or “Received Signal Strength Indicator”
• Wireless parameter configuration support
• Fixed-point transmission support
• SMA and IPEX Antenna Connector
• USB to LoRaTM and Pi to LoRaTM Communication via UART
• Comes with development resources and manual

LED Indicators:

• RXD/IXD: UART RX/TX indicator
• AUX: Auxiliary indicator
• PWR: Power indicator

Serial/USB selection Jumpers:

• A: USB TO DART to control the LoRa module through USB
• B: Control the LoRa module through Raspberry Pi

Data/Command made selection jumpers:

• Short M0, short M1: Transmission mode
• Short M0, open M1: Configuration mode
• Open M0, short M1: WOR mode
• Open M0, open M1: Deep sleep mode

Specifications:

• Frequency - 433/868/915MHz
• Power - 22dBm
• Distance - Up to 5 KM
• Interlace - DART Communication
• Serial Port Module - E22-400T22S / E22-900T22S
• Voltage Level Translator - 74HC125V

Kit Content:

• 1 x LoRa™ Module for Raspberry Pi (433/868/915MHz)
• 1 x Antenna

Note:

• Raspberry Pi is not included!
• For reference only, please confirm the local supported LoRa band before placing an order.