Evil Crow V2 Snap Case w/PwrSwitch for 1000mAh bat

Name: Evil Crow V2 Snap Case w/PwrSwitch for 1000mAh bat
SKU: 31741
Price: 12.95 USD
Availability: InStock
Rating: 5.00 (1 reviews)

(1 Review)

Snap Together Case For Evil Crow V2 - Fits 1000mAh Lipo

Designed by SDI in United States of America

Evil Crow V2 Snap Case w/PwrSwitch for 1000mAh bat 1

Evil Crow V2 Snap Case w/PwrSwitch for 1000mAh bat 2

Evil Crow V2 Snap Case w/PwrSwitch for 1000mAh bat 3

Evil Crow V2 Snap Case w/PwrSwitch for 1000mAh bat 4

Evil Crow V2 Snap Case w/PwrSwitch for 1000mAh bat 5

Evil Crow V2 Snap Case w/PwrSwitch for 1000mAh bat 6

Evil Crow V2 Snap Case w/PwrSwitch for 1000mAh bat 7

2023-09-03T17:02:41.953Z-20230902_220120.jpg

2023-09-03T17:02:41.953Z-20230902_220446.jpg

2023-09-03T17:02:41.953Z-20230902_220149.jpg

2023-09-03T17:02:41.953Z-20230902_220111.jpg

2023-09-03T17:02:41.953Z-20230901_163052.jpg

2023-09-03T17:02:41.953Z-20230901_162732.jpg

2023-09-03T17:02:41.953Z-20230901_162825.jpg

Buy with confidence.

Our Tindie Guarantee protects your purchase from fraud. Learn More

Snap Together Case For Evil Crow V2 - Fits 1000mAh Lipo

What is it? Snap Together Case For Evil Crow V2 - With Prewired/soldered Power Switch and heat shrink to protect solder joint. ( DOES NOT INCLUDE THE Evil Crow V2 UNIT ITSELF, THIS IS JUST A CASE FOR…

What is it?

Snap Together Case For Evil Crow V2 - With Prewired/soldered Power Switch and heat shrink to protect solder joint. ( DOES NOT INCLUDE THE Evil Crow V2 UNIT ITSELF, THIS IS JUST A CASE FOR IT!)

Nicely houses and protects the Evil Crow V2 Device, some firmware versions don't allow for the ability to power the device off, so I created a case that allows that. You can cut either one of the battery wires and then solder the leads from the switch to them to allow you to turn the power on and off. Has an end that will snap over the USB protecting it and ensuring that your SD card does not fall out and get lost or damaged.

I used this battery on Amazon, HOWEVER i had to cut the jst 1.25 connector off and put a JST 2.0 connector on the battery. (** be sure to observer battery polarity if you do find a similar battery with a JST2.0 connector!!) Link to battery: https://www.amazon.com/gp/product/B07CXNQ3ZR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Specifications of the battery I used: Standard Voltage: 3.7V LiPo Rated Capacity: 1000mAh Weight: About 17g Size: 44269（mm）

It requires no tools to put together, no screws or anything to mess with! Buttons are built into the case and make it nice and compact.

No country selected, please select your country to see shipping options.