ATTINY1614 DEVELOPMENT BOARD

The fully assembled Attiny1614 board utilizes the Attiny1614 microcontroller, a powerful chip that is Arduino compatible, small and low cost enough; perfect for all of your projects.

Board Features

• 16Kb flash, 2k SRAM
• 12c and SPI compatible
• 11 I/O pins
• 6 PWM pins
• Internal clock of (up to) 20MHz at 5 volts and (up to) 10Mhz at 3.3 volts.
• UPDI programming header
• Micro USB connector to easily power the board
• Attiny1614 chip
• Capacitor for power filtering
• Breadboard compatible pin headers
• Four 2mm (0.2cm) holes for easy mounting

Other Features

There is a QR code on the back of the board which leads you to a site with all of the information you need to start using your new board.

Additionally, UPDI Male headers come pre installed.

What can it do

The Attiny1614 development board can do anything a regular Arduino Uno can do, but with a smaller form factor.

Additional information/Everything else you need to know

This board was designed with a purpose to create a small microcontroller that was powerful enough to fit demanding projects, have a good amount of I/O pins for all applications, easy to power (with a USB connector), easy to program, and most importantly easy to use.The board is also breadboard friendly. The board comes with a matte black finish, and silkscreen.The UPDI pins are broken out into their own separate set of headers which makes this chip easy to program. The boards will be preloaded with the updi bootloader provided by the megatinycore.

Happy making!