USB - UART adapter with CP2102 -- ALL PINS OUT

Name: USB - UART adapter with CP2102 -- ALL PINS OUT
SKU: 8743
Price: 4.63 USD
Availability: Discontinued

The one board every maker needs. CP2102 USB to UART(TTL) converter onboard with all pins taken out and with adjustable output voltage.

Designed by Soldered Electronics in Croatia

Product Retired

This product is no longer available for sale.

The seller may be offering an improved version or it may be hanging out on the beach, enjoying the retired life.

While you're here, check out these other awesome products for sale!

Visit Store

More From Soldered Electronics:

CAN Transceiver MCP2518 board

Soldered Electronics

$22.95

Load-cell ampfilier HX711 board

Soldered Electronics

$7.95

Air quality sensor MQ135 breakout

Soldered Electronics

$5.50

Digipot 10k MCP4018 breakout

Soldered Electronics

$3.95

More From Prototyping & Fabrication

PMW3389 Motion Sensor

Joe's Sensors and Sundry

$29.99

PMW3360 Motion Sensor

Joe's Sensors and Sundry

$29.40

Sale

Flipper Zero RGB Mod

Midwest Gadgets LLC

$12.75 $15.00

FPGA Mezzanine Card (FMC) LPC Pin Header Board

I A M Electronic

$235.00

USB - UART adapter with CP2102 -- ALL PINS OUT 1

USB - UART adapter with CP2102 -- ALL PINS OUT 2

USB - UART adapter with CP2102 -- ALL PINS OUT 3

The one board every maker needs. CP2102 USB to UART(TTL) converter onboard with all pins taken out and with adjustable output voltage.

This little adapter converts USB communication to UART using Silabs CP2102. Everything is packed on a small board. In addition to standard UART pins arranged in standard order: DTR, RXD, TXD, VCC, CTS, GND, other pins from the chip are available on the board: RST, Suspend, Suspend ', RI, DCD, DSR , RTS, CTS.

In addition, the board is a voltage regulator and a switch, it is possible to determine the output voltage of 3.3V or 5V, depending on the device you are using. Logic UART signal is always 3.3V, but do not worry, 5V devices will work without problems. There are also three LEDs, one for power indicator and one for each direction of UART communication.

Dimensions: 25 x 35 mm
USB - UART bridge: CP2102
Input voltage: 5V (USB)
Output voltage: 3.3V ili 5V
Logic of UART signal: 3.3V

This board has been manufactured in Croatia by e-r.io: Blog, Github, Web store.