Enable FrSky telemetry on any Pixhawk (original with DF13 or clone) with this telemetry cable and get flight controller information directly on your RC transmitter! As seen on ArduPilot.org

Connects your PixHawk flight controller to a FrSky Smart Port receiver, such as X8R or R9.

Allows you to receive telemetry data from your PixHawk flight controller on your FrSky Radio. You can also run a Lua Script, such as LuaPilot or Yaapu Telemetry Script

NO SOLDERING NEEDED!

DO NOT PLUG THE TELEMETRY CABLE TO THE FLIGHT CONTROLLER WHILE IT IS ON! THE CABLE MAY OVERHEAT!

Molex PicoBlade connector (also called JST 1.25mm)
Compatible with both original (3DR) Pixhawks (with DF13 connector) and Pixhawk clones (with Molex PicoBlade connector).

A Pixhawk or other compatible flight controller and a FrSky Smart Port receiver are needed (but not included).

Weight: 0.1 oz. / 2.8 grams Length: approximately 10 inches / 25 cm