Velociduino New Generation Programmable Injection Kit, 100% Speeduino Compatible, the kit includes the following:

• Velociduino NG base system
• Plastic box
• DB37 2.0 interface for added convenience
• 50cm tagged harness with DB37 termination
• USB Cable
• DRV8825 Stepper module
• Bluetooth module

With the purchase of this kit you will receive support and advice for your project, a detailed installation diagram, as well as the electronic diagram of the base card.

This kit includes a 1 year warranty from the date of purchase.

Characteristics:

Sequential injection up to 6 cylinders *

6 injection channels

4 ignition channels

16 × 16 Tables

New SMD technology that provides components with greater protection and resistance to failure

Ideal to give your engine more performance without having to deal with the complication of original ECUs, it is also perfect for converting carburetted engines to injection

Compact box of 10 x 5 x 11 cm.

Engine support from 1 to 8 cylinders (Sequential up to 6 cylinders, Semi sequential up to 8 cylinders)

For use with an external MAP sensor, if you want to use an integrated 2.5 bar MAP, it has an additional cost of $25

Adjustable sensors

Protected input channels for sensors: CLT, IAT, TPS, O2, AUX1, AUX2, LAUNCH, FLEX

Support for ethanol (flex fuel) **

Clutch pedal input (Launch Control)

Boost control "closed loop" and "open loop"

Nitro Stage 2 Control

VVT valve control

Expansion Bay for VR Conditioner ***

IAC control: PWM, Stepper

Channels for control of fuel pump, electro-fan, tachometer, built-in and ready to run without modifications

4 additional general purpose output channels.

2 built-in medium load output channels (solenoids, turbo valves, etc)

2 Configurable General Purpose Auxiliary Inputs (Oil Pressure, Fuel Pressure, etc)

Dual tables handling (It is possible to load 2 maps and switch from one to the other using a switch)

Auto tune using the “Tuner Studio” software ****

Prototype area for custom circuits.

Notes:

*In the sequential injection mode for 6 cylinders, the ECU is configured in mode (6 × 3: 6 injection channels and 3 ignition channels, ignition will only work in wasted spark mode), it is necessary to configure the firmware to work in this mode, you must select this option at the time of ordering.

**Ethanol sensor required not included in this kit

***VR Conditioner sold separately

****Requires the pro version of the Tuner Studio software, as well as a wideband oxygen sensor.