Introduction

The Finger Print Sensor is one optical fingerprint sensor which will make fingerprint detection and verification adding super simple.There's a high powered DSP chip AS601 that does the image rendering, calculation, feature-finding and searching. You can also enroll new fingers directly - up to 162 finger prints can be stored in the onboard FLASH memory. There's a red LED in the lens which will light up during taking photos so that you know its working condition. It is easy to use and by far the best fingerprint sensor you can get.

Specification

• Supply voltage: 3.6~6.0 V
• Operating current(Max) : 120 mA
• Fingerprint imaging time: 1.0 S
• Match Mode: Compare Mode 1:1
• Search Mode: 1:N
• Storage capacity: 162 templates
• False Acceptance Rate : 0.001% (Security level 3)
• False Reject Rate ：1.0% (Security level 3)
• Baud rate ：9600, 19200, 28800, 38400, 57600bps (default is 57600)
• Interface：TTL Serial
• Work Temperature：-20 ~ +50 ℃

Door to Open Source Hardware (A fingerprint lock solution)

This is a door with fingerprint lock demo that found by acrylic, Seeeduino and some other electronic modules~

First, you should enroll your fingerprint. Long press the button, then it'll go into enroll mode. there will be some information print in the lcd, just follow it.