The WAP-01 is ideal for converting an existing wired Ethernet socket to a wireless access point. It's equipped with a switching power supply that has an input range from 85VAC up to 265VAC. WallFi can also be powered through a Rj45 connector(PoE). An adjustable step down converter ensures stable power output regardless of the losses from long cables. Very easy configuration with a lot of adjustments as the WAP-01 is controlled by OpenWrt web interface.

Specifications

• Standards - IEEE 802.11n, 802.11b, 802.11g
• High data processing ability，MCU frequency 580MHz
• Protocols - TCP/IP, PPPoE, DHCP, ICMP, NAT, SNTP
• Port - One 10/100Mbps LAN port
• Cabling Type - 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m)
• Power - 110V – 220V/0.5A, PoE 5V – 24VDC/0.5A
• Board Dimensions (L x W x H) - 50mm x 40mm x 6.5mm
• Safety & Emissions - FCC , CE
• Frequency Band - 2.4~2.4835GHz
• 20/40 Channel bandwidth
• Support 802.11v
• Support AP,STA and AP,STA mixed
• Support 16 Multiple BSSID
• Support multiple security methods WEP64/128, TKIP,AES, WPA, WPA2, WAPI
• Temperature - Operating : 0℃~40℃ (32℉~104℉) Storage: -40℃~70℃(-40℉~158℉)
• Humidity - Operating: 10% - 90% RH, Non-condensing Storage: 5% - 90% RH, Non-condensing

Features

• The power supply has a range from 85VAC up to 265VAC. So it can work all over the world without the need of an external adapter.
• Can be powered through an Rj45 connector(PoE). Adjustable step down converter ensures stable power output regardless of the losses from long cables.
• Switch for turning off the side LEDs.
• Repeater mode is also available. Even if your existing wireless router does not cover all of your location with wifi signal, this board can cover the gap.
• Wide coverage area of wifi signal with the high gain antenna that is provided with the kit.

Package Includes

• 1 x WAP-01 Access Point & Repeater Board
• 1 x Power Supply Module
• 2 x Antenna Board