This is a 900Mhz version of the CC1101 module fully pin-compatible with all existing CC1101 boards!
Designed by Rabbit-Labs™ in United States of America
Buy with confidence.
Our Tindie Guarantee protects your purchase from fraud. Learn More
ALL ORDERS SHIP FROM THE UNITED STATES What is the purpose of this board? This is a custom-made 900 Mhz module designed around a similar form factor to the existing CC1101 modules available on amazon…
Read More…This is a custom-made 900 Mhz module designed around a similar form factor to the existing CC1101 modules available on amazon and aliexpress.
The only CC1101 readily available is the 433Mhz CC1101 module. While this module is able to operate on higher frequencies > 600Mhz, it does not perform as well at these frequencies in comparison to the 433Mhz it was designed for. Because of this, I built this module to be used at higher frequencies such as 868-900Mhz as it uses a radio tuned to handle this upper-frequency range while also being compatible with 315/433Mhz (just not as strong as 900Mhz)
This is the only high-frequency module fully pin-compatible with the MAYHEM Board and other CC1101 MiniBoards, Multiboards, and full-height boards on the market. The module is plug-and-play with your existing boards and follows the same pinout as the EByte 433Mhz CC1101 module that has become the go-to in the community. This board also has decoupling capacitors as close to the radio itself and RF Shielding around the actual RF circuitry to limit noise.
*Please Note: This module by itself is NOT plug and play on your Flipper Zero - a carrier board is needed. The carrier board options I offer are either the Rabbit Labs Hotswap (which allows for plug and play on all the modules I offer) or the Rabbit Labs CC1101 expansion board (the expansion board requires soldering for the available modules if you select the unsoldered/do it yourself option).
1 - GND - Flipper Pin 11
2 - 3v3 - Flipper Pin 9
3 - GD0 - Flipper Pin 6
4 - CS - Flipper Pin 4
5 - SCK - Flipper Pin 5
6 - MOSI - Flipper Pin 2
7 - MISO - Flipper Pin 3
8 - UNUSED - N/A
No country selected, please select your country to see shipping options.
No rates are available for shipping to .
Enter your email address if you'd like to be notified when Rabbit-Labs™ CC1101 900Mhz Module can be shipped to you:
Thanks! We'll let you know when the seller adds shipping rates for your country.
Shipping Rate | Tracked | Ships From | First Item | Additional Items |
---|---|---|---|---|
:
|
GERMAN CUSTOMERS - We comply with applicable LUCID recycling requirements set forth by VerpackG LUCID identification number: DE2197487135237
While Tindie allows up to 14 days to ship, I try to ship all items on average 5-7 BUSINESS days once an order is received. If you need the item sooner, please leave a note in the additional comments section of your order and I will reach out / TRY to accommodate.
International orders - Please contact me for custom shipping options if there is no available quote displayed. Customs Duties / VAT / Taxes /Fees are the responsibility of the receiver. Unfortunately many changes have been made in regard to how customs is accepting packages, and I have seen an uptick in packages being "returned to sender". in these cases, please reach out to me and I can work with you. International shipments via USPS are shipped using "Asendia Logistics" which leverages USPS and local postal couriers in the receiving country. this often cuts down the costs, as well as the the time required to ship (For instance, Retail USPS price to Overseas is around $55 and can take 4-5 weeks.)
I work Full-Time Monday-Friday 8-6 PM. As such, I perform all shipping in the evening and when tracking information is sent out, it will show as the item is "awaiting acceptance" by USPS / UPS / etc. What this means, is that your items have been packaged, a label purchased, and has been placed in a shipping crate ready to be dropped off/picked up at the post office / logistics carrier. If your item has not moved from the "awaiting acceptance" status (after you have received the tracking info) for more than 3 business days, please contact me so I may investigate as there is a risk the courier misplaced the package as I hand-off the packages in a shipping crate and it is up to them to scan each package one by one. Specifically regarding USPS shipments - I utilize my local post office for all packages, this post office is wildly short staffed and overworked so I ask you have patience if you chose this shipping method which is one of the cheaper/slower options (ground/standard USPS).
For international customers using DHL: While service IS expedited over USPS (3 days vs 3 weeks) the service points to drop off packages are not near my home, which requires a special trip to deliver them. As such, there may be a small 1-3 day delay in dropping these off. If you need the item sooner, please reach out to me via direct message and I will do my best to accommodate.
If you have any other questions or concerns please feel free to message me and I'll do my best to get back to you as soon as I am able.
Product: (5.00)
Documentation: (5.00)
Shipping: (5.00)
Communication: (5.00)
Eric | Jan. 12, 2024
Nello | Oct. 17, 2023
Israel | Sept. 28, 2023
Mykola | Sept. 21, 2023
Mario | July 1, 2023
Brian | May 16, 2023
Buy with confidence.
Our Tindie Guarantee protects your purchase from fraud. Learn More
$29.99
Free Shipping!
$19.25
Free Shipping!
$42.74
Free Shipping!
$33.60
Free Shipping!
$35.00
Free Shipping!
$27.99
Free Shipping!
$49.69
Free Shipping!
$29.50
Free Shipping!
$5.75
Free Shipping!
$55.00
Free Shipping!
$14.99
Free Shipping!
$25.00
Free Shipping!
By clicking Register, you confirm that you accept our Terms & Conditions
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!