Graphical Component Tester

Name: Graphical Component Tester
SKU: 18692
Price: 17.00 USD
Availability: OutOfStock

LCR Meter, Transistor Tester, ESR, SCR, Capacitance Inductance Resistor Meter, LCR T3 T4

Sold By The Fragmentation Paradox

2019-11-26T22:53:47.773Z-WP_20191121_13_55_00_Pro.jpg

2019-11-26T22:53:47.773Z-WP_20191121_14_06_45_Pro.jpg

2019-11-26T22:53:47.773Z-WP_20191121_13_54_56_Pro.jpg

2019-11-26T22:53:47.773Z-WP_20191121_13_38_40_Pro.jpg

2019-11-26T23:00:37.550Z-WP_20191121_14_04_01_Pro.jpg

2019-11-26T23:00:37.550Z-WP_20191121_14_12_50_Pro.jpg

2019-11-26T23:00:37.550Z-WP_20191121_14_18_17_Pro.jpg

2019-11-27T20:01:56.760Z-WP_20191121_13_58_58_Pro.jpg

2019-11-27T20:01:56.760Z-WP_20191121_13_59_33_Pro.jpg

2019-11-27T20:01:56.760Z-WP_20191121_13_59_47_Pro.jpg

2019-11-27T20:01:56.760Z-WP_20191121_14_01_07_Pro.jpg

$17.00

Out of Stock

Sold out since Dec 07, 2020

LCR Meter, Transistor Tester, ESR, SCR, Capacitance Inductance Resistor Meter, LCR T3 T4

This is a very practical electronic component tester. It has automatic detection of NPN and PNP transistors, n-channel and p-channel MOSFET, diodes, transistors, resistors, inductors, capacitors and LEDs. It comes fully assembled, you only need to remove the 4 screws to insert the battery and close it back again.

Features:

Powered by 9V layer-built battery, can use 2 li-ion batteries to form a 8.4V battery pack for long time power.
Measuring bipolar transistor current amplification factor and base-emitter threshold voltage.
Automatic test the pin of a component, and display on the 128 * 64 LCD backlight.
Measure the gate and gate capacitance of the MOSFET threshold voltage.
One -button operation, automatic shutdown, only 20nA shutdown current.
Reverse breakdown voltage is less than 4.5V, Zener diode can be identified.
2uF more capacitors can simultaneously measure the equivalent series resistance ESR values.
Via the base - emitter threshold voltage and high current amplification factor to identify Darlington transistors.
Can simultaneously measure two resistors and resistor symbol is displayed. Displayed on the right with a decimal value of 4.
Can detect the transistor, MOSFET protection diode amplification coefficient and the base to determine the emitter transistor forward biased voltage.

Specifications:

Material: PCB
Display: 128 * 64 LCD backlight
Testing Speed: 2 seconds (1 minute is normal for large capacitor)
Shutdown Current: 20nA
Displayed Value: 25pf-100mF (resolution 1pF)
Inductance: 0.01mH-20H
Resistance: 0.5Ω-20MΩ
Power Voltage: 9V layer-built battery / 2 li-ion batteries to form a 8.4V battery pack
Resolution of Resistance Measurement: 0.1 ohms
The Highest Measured Value: 50M ohms
Provided Testing Current: Approx. 6mA
Product Size: 7.2 x 6.25cm (L * W)
PLA 3D Printed Enclosure (black and orange default, but other colors available, message me)
Enclosure Size: 8.2 x 11.2 x 21.9 cm (L * W * H)