This is the full kit for a TiltBridge Tilt Hydrometer-to-WiFi Bridge. This kit includes the following components -- everything you need to build a full TiltBridge:

• LOLIN D32 Pro
• LOLIN TFT/ePaper Cable
• LOLIN TFT Touch Shield
• 3D Printed Case
• Screws for Case Assembly

Note - By default, I will send whatever color/material of case I have available. If you are interested in a custom color/material I can generally accommodate, but there may be delays/extra costs as I acquire the required filament. Please reach out to me first if interested to discuss pricing/availability.

Kit Assembly

Kit assembly is simple, and can be completed with a small Philips head screwdriver

1. Secure the D32 Pro to the base of the case using the three pan head screws
2. Plug the cable into the port on the D32 Pro and connect the other end to the TFT screen
3. Wrap the cable such that it can be secured inside the case, and place the TFT screen over the "pins" on the case base
4. Insert the case lid over the screen, and secure it to the sides of the case using the countersunk screws
5. Flash the latest TiltBridge firmware to the controller using BrewFlasher or BrewFlasher Web Edition