An alternative design is also available: SC715

This module has the following features:

• High-speed storage
• CompactFlash card adapter included
• Tight address decoding
• Optional power to IDE connector
• Activity LED
• RC2014 compatible
• Low profile module

Documentation

The documentation can be found at www.scc.me.uk (Small Computer Central) or by following the documentation link below.

Compatibility

This module conforms to the RCBus specification v1.0 for RCBus-2014 standard 40-pin long modules.

The printed circuit board outline conforms to the RC2014 standard for low profile modules.

The module is compatible with all RC2014 backplanes, all RCBus-2014 backplanes (RC2014 compatible including SC100 series) and all full RCBus 80-pin backplanes (including SC700 series).

A similar design SC715 is available in the larger module form factor with a double row bus connector. It is compatible with the RCBus, including the RC2014 standard 40-pin bus, the RC2014 enhanced 60-pin bus and the extended 80-pin RCBus.

The RCBus specification includes RCBus-2014 (both RC2014 standard 40-pin bus and RC2014 enhanced 60-pin bus) and also the full 80-pin RCBus. The 80-pin RCBus provides support for advanced Z80 features, such as the interrupt daisy-chain, as well as support for other processor families.

The Kit

This kit includes all the components needed to make the module, as shown in the first picture. Other modules and backplanes shown in the other pictures are not included. You will require tools, solder, and cleaning materials to assemble this kit. The Compact Flash card adapter is supplied fully assembled so there are no surface mount components to solder.

The kit can be built to either mount the CF card horizontally or vertically.

You will need to source a suitable CompactFlash card. Older, relatively low-capacity (up to 2GB) cards are usually the best choice. Some cards may not work with this simple 8-bit IDE interface, especially more modern, high-capacity, high-speed cards.

Printed Circuit Board

The printed circuit board is available on its own here.

Notes

• This product is supplied as a kit of parts that require assembly.
• It is your responsibility to pay any import duty or taxes charged by your home country.
• My products are made in accordance with the "designed for RC2014" labelling scheme.
• RC2014 is a trademark of RFC2795 Ltd.
• This product is designed for hobby use and is not suitable for industrial, commercial, or safety-critical applications.