1pcs of metal template for modifying 2.5" bi-xenon projectors to fits DEPO/VALEO(probably TYC also) headlights for facelift Audi A4 ( - 2000). If you have pre-facelift model, you can always upgrade your headlights to facelift ones but this procedure is not in the how-to provided with the template. With adapter also came electronic manual how to make this upgrade.

The template was tested with these projectors: https://www.aliexpress.com/item/32759121526.html but similar projectors can by found on ALI(the list is provided without warranty, that any of these projectors will work): https://my.aliexpress.com/wishlist/shared.htm?groupId=100000023931021 It will probably works for https://www.theretrofitsource.com/bi-xenon-4tl-r-P-M-4TLR?quantity=1

The installation did not require to open headlight, only cut bottom ballast position which can be then covered with plastic or metal sheet using screw holes originally designed for securing ballast.

Fake adjuster

As option set of 2 modules can be brought, these modules will lower your headlights and return them back after you turn your headlights on. Modules are designed to be plug and play, same connectors as in-stock headlights, so they can be simply instaled and removed if desired. Modules are small factor ~2x5cm plus cable so day fit inside light without a problem.

Required tools:

Opening headlights:

• sharp knife

Dismantling original projectors

• M8 socket + extension
• Philips head screwdriver

modifying new projectors

• 4x M5 bolts + nuts
• 4.2mm drill
• hacksaw

This product cannot be returned.