Product description

This kit includes the Official Raspberry Pi Pico with pre-soldered headers, and an Arducam mini 2MP SPI camera module, which helps your pico see the world and acquire visual information. The jump wires and USB cable needed are also included in the bundle, so as to work out-of-box for the Person Detection demo.

Feature

You'll Be Getting - A small but mightly Official Raspberry Pi Pico with pre-soldered headers, an Arducam Mini 2MP Plus OV2640 SPI camera module, a Micro USB cable with a switch button, and jump wires. Camera Module - 1600×1200 Color SPI Camera with 8MByte onboard frame buffer, which is a general-purpose solution compatible with multiple platforms, include Arduino, ESP32, and the Raspberry Pi Pico we’re using. Arducam Features - Onboard ISP sensor that handles AE, AWB, Sharpness, Noise Reduction, Defect Reduction, Gamma, Color Saturation, Special Effects; I2C for configuration, SPI for data and command. Hassle-Free - No other accessories needed, just connect to Raspberry Pi pico to the Arducam mini camera module with the jump wires, the Person Detection demo is also available. Applications - Highly recommended for machine vision applications and IoT applications. Please search for ASIN B096D88H26 to get the Pico and QVGA camera bundle.

Raspberry Pi Pico Features:

• RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom

• Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz

• 264KB of SRAM, and 2MB of on-board Flash memory

• Castellated module allows soldering direct to carrier boards

• USB 1.1 with device and host support

• Drag-and-drop programming using mass storage over USB

• 26 × multi-function GPIO pins

• 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels

Arducam Mini 2MP Features:

• 2MP image sensor OV2640

• M12 mount or CS mount lens holder with changeable lens options

• Onboard 8MByte frame buffer

• I2C interface for the sensor configuration

• SPI interface for camera commands and data stream

• All IO ports are 5V/3.3V tolerant

• Support JPEG compression mode, single and multiple shoot mode, one time capture multiple read operation, burst read operation, low power mode and etc.

• Compatible with microcontrollers like Arduino and Raspberry Pi Pico

• Compact form factor

Documentation

Manual

Packing List

• 1 × Arducam Mini 2MP camera module

• 1 × Raspberry Pi Pico RPi with Pre-soldered Header

• 20 × Jumper Wires

• 1 × Micro USB cable with ON/OFF switch button