Description

This module based on Nordic nRF24L01, highly integrated, ultra low power (ULP) 2Mbps RF transceiver for the 2.4GHz ISM (Industrial, Scientific and Medical) band. Nordic nRF24L01+ integrates a complete 2.4GHz RF transceiver, RF synthesizer, and baseband logic including the Enhanced ShockBurst hardware protocol accelerator supporting a high-speed SPI interface for the application controller.

This board has full size, SMA connector for attaching external high gain antennas.!

Example code is here: http://arduino-info.wikispaces.com/Nrf24L01-2.4GHz-HowTo and here: http://playground.arduino.cc/InterfacingWithHardware/Nrf24L01

Specifications

The data sheet is here: http://www.nordicsemi.com/eng/Products/2.4GHz-RF/nRF24L01P

• Data Interface: SPI or GPIO
• Arduino compatible code here: http://playground.arduino.cc/InterfacingWithHardware/Nrf24L01
• Operating Frequency:2.4 GHz
• Transmit Power:+7 dBm
• Receiver Sensitivity:-90 dBm
• Approximate Range:1000 m
• Data Transmission Speed: 250 kbps, 1 Mbps, 2 Mbps
• Dimensions: 15 x 29 mm
• Vcc Power Requirements: 1.9 - 3.6 V **MAX**
• Digital Interface I/O Voltage: Vcc to 5.0V