MOSFET Switch

Name: MOSFET Switch
SKU: 5105
Price: 14.95 USD
Availability: InStock
Rating: 4.25 (1 reviews)

(1 Review)

MOSFET breakout board for driving lights, motors, heaters, etc. from Arduino or other 5V microcontroller

Designed by Visgence, Inc. in United States of America

2015-05-21T18:13:22.688Z-mosfet_side_final.jpg

2015-05-21T18:21:57.315Z-mosfet_final.jpg

2016-02-02T00:04:44.046Z-mosfet_switch_diagram-01.png

2016-08-30T23:52:21.657Z-snapshot970.jpg

Buy with confidence.

Our Tindie Guarantee protects your purchase from fraud. Learn More

MOSFET breakout board for driving lights, motors, heaters, etc. from Arduino or other 5V microcontroller

A large power MOSFET is a great way to switch big things like DC motors, light bulbs, LEDs, and heaters for 3D printers using a microcontroller like the Arduino. This board is a breakout for the STP…

Technical Data:

MOSFET Datasheet: http://www.st.com/web/en/resource/technical/document/datasheet/CD00002690.pdf
LED Datasheet: http://www.kingbrightusa.com/images/catalog/SPEC/WP7113LID.pdf
Terminal Block Datasheet: http://www.on-shore.com/sites/default/files/manuals/osttcxx2162.pdf
Max Voltage (continuous): 30V
Max Voltage (1/10 Duty Cycle, 0.1ms Pulse Width): 60V
Max Current (continuous): 15A

No country selected, please select your country to see shipping options.

Change Destination Country:

Review Breakdown

Average Ratings

Product: (4.00)

Documentation: (3.00)

Shipping: (5.00)

Communication: (5.00)

Richard | Jan. 27, 2016

Great product.

I was a bit confused at the operation until they clarified.
You provide the desired voltage to switch on Vcc (e.g., 5 volt, 12 volt, ...) and the ground.
These wires should be sufficient to carry the desired load current.

You provide a switch signal (e.g., 5 volt or 3.3 volt) to the sw signal to close the switch and gnd to open the switch. The LED turns on when switch is closed.

When 5 volt or 3.3 volt are provided, the neg output connection is shorted to ground thereby completing the output circuit.

I wondered what would happen if I applied 110 volt ac. I found that a 150 watt bulb dimmed. No damage though so this product is robust.