MyMENSCH Rev-C (W65Cx65MMC-C) is a small printed circuit board (PCB), 1.50” x 2.75”, designed for rapid prototyping of microcontrollers for sensing, processing, communicating and actuating (SPCA). MyMENSCH was designed for developing customized application-specific versions of the W65C165i1M08SA microcontroller. The FPGA used on this board is the MAX10 10M08SCU169C8G and is pre-programmed with a secured W65C165i1M08SA microcontroller.

MyMENSCH Rev-C comes assembled as shown. J1 and J2 connectors to be added by the user. 5V Micro-USB Cable Not Included JTAG Cable not included but not needed for default build.

Features: - Comes Programmed with W65C165i1M08SA MCU with W65C02S MPU, VIA, ACIA, GPIO, I2C, SPI, User FLASH, and more - USB 5.0V Supply with 3.3V Regulator for FPGA / ALL IO is 3.3V - CH340 USB-to-parallel Code and Debug port - 8 LEDs connected to GPIOA - Two 2x25 pin connectors for 92 IO pins provide quick prototyping

For more information, visit: https://wdc65xx.com/Single-Board-Computers/mymensch-rev-C/

Board Data Sheet

PMCU Data Sheet