E-paper displays are amazing. Start working with your own Arduino E-paper project with this Arduino micro compatible E-paper display driver.

Features:

• Compatible with EPD and GxEPD libraries (which are available for download and add to Arduino).
• Full SMD design
• Small size with micro USB port (Only 35X45 mm)
• Onboard 3.3V regulator with 500mA peak current output
• Bottom contact 24-pin FPC connector for E-paper display
• Can drive single or multicolor E-paper displays
• Ships with Arduino bootloader installed so that you can start programming using the USB port and Arduino program right away!
• Option to include SPI programming headers (in case you'd like to change the Arduino bootloader!)
• Includes one LED connected to the pin 5 of the Arduino micro.
• PDF Schematics is attached under the datasheet link below.
• Example programs are available on the following Github address for both EPD and GxEPD libraries: https://github.com/woodoonics/Arduino_E-paper

What's included in the package:

• Arduino micro compatible micro USB E-paper driver board.

• 1.54" two color (black and red) E-paper display.

• The connector pinouts and display datasheet (sent by Email).

What's not included:

• Micro USB cable (because of environmental issues it's much better no to produce new cables which contain lots of plastic. Most of the people have a micro USB cable which they use to charge their phones so it's much better to use own cables than to produce new ones!)

• The SPI header is optional (by default it's not soldered so please specify if you want one!)

Please pay attention:

• If you're going to work with large E-paper displays (larger than 2.9"), please be aware of the RAM memory limitations of the ATMEGA32u4 as this design doesn't include a separate RAM.
• (As the display is saying in the pictures) Because of COVID-19 the shipment might be delayed so please be patient. Thank you!