Fonctionne parfaitement, mais attention à votre SSID !
For Internet Radio with Touch Screen V3
Works perfectly, but I had to change the SSID of my router because the WIFI radio did not recognize it. I searched for a long time before finding the solution!
The problem is that, as a result, I had to change the SSID of all my connected objects!!!
The screen is very responsive and it is very easy to change channels or modify the sound volume.
On the other hand, I don't really like the case, made with a 3D printer, the implementation of the components inside is difficult due to the lack of fixings or threads, I therefore changed the case, with a larger diameter speaker!
And I have a question: how do I change the WIFI settings once everything is programmed and everything is working???
Response from The MicroMaker | July 26, 2024
Gilles, thanks for writing that nice review
If you wish to connect to a different network. For example in another location just turn on the radio at that place.
1. Open the Wi-Fi settings on your phone or computer find "My_Radio" network and connect to it.
2. Open your browser in the following IP address 192.168.4.1 find your network and enter your password.
3. Now you are connected.
If you want to erase your network credentials Wi-Fi settings - Press the reset button and Key buttons together. Release the reset button while keep pressing the key button for at least 3 seconds until you get a message on the LCD that Wi-Fi setting has been erased. Now you can connect to the network of your choice by following the above procedure. The Key - IO14 button is located on the left bottom side- refer to the photo in the user manual.
BTW: A new , slightly improved version of the 3D printed enclosure is coming soon.
I am glad that you managed to print your own enclosure and customize it to your liking.
