Tindie

Avatar

Built to Spec

302 orders since Jun 27, 2012

Kansas City, MO, United States of America

Ships from United States of America.

View Store

Overall Rating:

Review Breakdown

5
4 4
3 3
0 2
2 1
0

Average Ratings

Product: (4.11)

Documentation: (4.00)

Shipping: (4.78)

Communication: (4.11)

All Reviews

Michael | Jan. 18, 2019

Nicely Done!

For USB µISP Case

Very well done design, precise fit, easy to assemble. makes a safe holder for the USB µISP. can't leave a short review.

Richard | April 27, 2018

Very nice prodduct, professionally constructed.

For Arduino Adafruit LCD Case

Love this case so much I ordered two more. The construction was easy and everything fit with such precision. My only problem was one of the Delrin side clips broke. Due to the precision of the cutting the clips need some additional force to be inserted and could snap the legs off. I suggest adding a couple, maybe two, extra ones.

R Bux | Sept. 7, 2017

It works. Clear Functional. Nice box

For Arduino Adafruit LCD Case

It works. Clear Functional. Nice box. Online documentation only.
No communication needed
rb

Steven | July 15, 2016

Meh...

For BeagleBone Green Case

Not the seller's fault, but this product is a flawed mechanical design. There are several areas where the plastic narrows to the point where it doesn't have the strength to survive assembly. I am a very handy person, but it was all I could do to put it together. In the process I broke off one alignment tab and cracked the top around the hole for the "user" button extension.

I'll look for another solution in the future.

Josh | Jan. 21, 2016

Nicely done case

For USB µISP Case

Case is easy to put together & well done. The switch & clock-line hole lines up perfectly with the board.
Fit is tight (no wobble) but not to the point that it will break anything. Makes the uISP really a polished, finished product that will stand up to being tossed in a box or cluttered desk.

Lester | Dec. 3, 2015

Case did not work

For Raspberry Pi A+/B+ Adafruit LCD Case

I ordered a case like the one in the photo which turns out to be opposite the Adafruit plate case sent me. There is no way someone would know there is a difference unless you had the display in hand which I did not at the time. I contacted the builder of the case who claims the advertisements states it's only for Adafruit yet this photo shows an Adafruit plate that matches mine exactly, so his statement was incorrect. He made no attempt to rectify the problem other than to tell me to leave the top section off. He also stated he had no record of my order and was not responsible for what he claimed was my error when ordering from another party. I will make certain not to order another product associated with the case manufacturer even though his workmanship was good.
http://www.dvmega.co.uk/pictures/IMG_3655.jpg
Lester Hudgins N3LH
Avatar
Response from Built to Spec | Dec. 4, 2015
I did try to resolve this issue with you, and you did not use it with the correct hardware, you used this board:
http://www.moencomm.com/catalog/product_info.php?cPath=24&products_id=36

Which is not an Adafruit product.

Craig Berscheidt
built-to-spec.com

Eric | June 25, 2015

Good case design.

For Raspberry Pi B+ Camera Case

Intructions are not included with the item, but can be found online. Definitely need instructions to assemble. When fully assembled, this is a sturdy case. But if you need to "open" it up, you'll have to somewhat disassemble as there is not a removable lid.
I was inititially sent the wrong item and contacted the seller. The correct item was resent right away. You can trust this seller.

Aaron | Feb. 8, 2015

Good Sturdy Case

For Clear Raspberry Pi A+ Case

Satisfied with the case, it feels thick and sturdy when put together yet heavy enough to stay put alright. Personally the Pi was bought as light and simple desktop / pda like device so the openings for extras were not tested but everything else was found accessible without any annoying tight ports or loose board. Matte finish is preferred normally but this crystal looks nice without being overdone.

Chuck | July 20, 2014

well designed and high quality product.

For Raspberry Pi and Camera Enclosure

Very well executed product

Robertino | March 20, 2014

Great stuff, I like it very much!

For Adafruit LCD + Keypad Plate Enclosure - Clear

I got this thing and assembled it very easy! I am using my Pi system, enclosed in this every day. It's robust, clear, and sturdy.

Oh, the most importantly: it fits great, at least for me. I had no issues with fitting. Review Image

Todd | March 10, 2014

Adafruit LCD + Keypad Plate Enclosure - Clear

For Adafruit LCD + Keypad Plate Enclosure - Clear

Very impressive case. Have admired this design for a long time. A must have enclosure for the Adafruit Display.

Clinton | Dec. 24, 2013

Cool, clever case!

For Clear Raspberry Pi Case

This is one of the better cases that I've seen for the PI in that it provides access to all of the connectors, but holds the board in place very well.

I don't know how well it would "breathe" if the PI were seriously overclocked and/or put in a high ambient temperature environment, but if there were a problem, it would be easy to modify.

Vichaya | Dec. 16, 2013

Nice design

For pcDuino Enclosure

I like that pins are exposed for easy attachment to hookup wires yet still keep the PCB relatively protected. It might be nice if an option for USB power is offered, in a custom micro-usb header form. That is not the shortcoming of this case, however. The designer of pcduino did a bad job of connector placement such that it is a very tight fit between HDMI and micro-usb power connectors. This likely needs a bare header to get a good fit.

Chris | Sept. 24, 2013

Very nice case

For Adafruit LCD + Keypad Plate Enclosure - Clear

This fits the pi + lcd plate very nicely. I'm so happy to have this case to really polish up my code-pushing device.

Jake | June 26, 2013

nice case

For BeagleBone Enclosure

I think the case I got may have been from an old batch as the sd card slot did not quite line up as well as everything else did. I ended up tweaking it with a dremel and cracked it, but it still works to protect my beaglebone where it is being used. I would buy one again without hesitation.

Andrew | June 13, 2013

Well made. Recommended.

For BeagleBone Black Enclosure - Black Acrylic

Overall I really like the enclosure. Very solid and does a great job of protecting the board. Only niggles are that it's a little complex to put together, and it is difficult to utilize the internal GPIO-like connections with the top on (I left it off).

Paul | June 6, 2013

I really like this enclosure.

For BeagleBone Black Enclosure - Clear Acrylic

I much prefer a "tight" bolted together enclosure over the rattling snap together versions. I have three and if I need more I'll get more of the same.

Shy Ming | May 30, 2013

What a neat and elegant enclosure

For BeagleBone Black Enclosure - Clear Acrylic

I love this Clear Acrylic enclosure for my BB Black. It's simply one of the nicest looking case you can get for your BeagleBone Black, period.

Though I'd very much appreciate the assembly process could be simpler :) Took me a while to piece them together ! Review Image

Eric | May 4, 2013

Works great with BeagleBone Black

For BeagleBone Sled With Hardware

Fits the new BeagleBone Black well with plenty of room for the microHDMI connector. Attached picture with the microHDMI plug installed. Review Image

Emile | Jan. 23, 2013

Good quality case for the money

For Clear Raspberry Pi Case

Not looking to spend a ton on your Raspberry Pi case? Me neither...

I settled on this one because I'm a fan of clear cases. This one looks great and was easy to snap together.

The only thing to note, is it could be tricky to put together. You'll need to use a little brain power for putting it together without it falling apart in your hands. The clips were a lot easier than I thought they would be. However I did have a little trouble with one, and my Pi sits slightly at an angle because of it. That isn't a problem for me, but just something to be aware of when you get it. Just tilt it a little and the last clip should go in fine.
Cookies help us deliver our services. By using our services, you agree to our use of cookies. Learn more.