Tindie

Really great when paired with the front panel. Please make more of these, they are great! I would buy many more to have copies of designs and to have more allowance for mistakes.

Response from Electronic things... and stuff | Dec. 2, 2020

Thank you very much Adam! Glad you like the front panel too!

Madison | Aug. 29, 2020

26 Bus connectors? HECK YES

For Eurorack Power Bus - 26

Because I live far away this took a little while to get to me, but David was great at communicating the shipping information.

The build was really easy. I accidentally had some legs shorted, so after troubleshooting that, I got it hooked up and running just fine.

Right now I am pushing 37 or so modules from it, by using flying bus ribbon connectors, and its holding up JUST fine.

Amazing product, customer service, and experience.

If you are *thinking* about getting this, you should probably just get it :)

Thanks David!

-Maddie

Response from Electronic things... and stuff | Oct. 27, 2020

Thank you very much Maddie!

Richard | Aug. 7, 2020

It's Precisely What It Says It Is, And That's Amazing

For 606BD Clone

Many, many years ago I brought my Roland TR-606, that I had modified with individual audio outs for each drum, to a recording studio. The engineer said it had the strongest bass drum he'd ever recorded. Now, with much gratitude to Monsieur Haillant, I get the same power and weight without the hassle of syncing my 606. With a little EQ and compression, this bass drum is a monster! Easy to build and the parts are easy to find. A fantastic module!

Ralphy | July 17, 2020

Great PCB Quality!

For Eurorack Power Bus - 26

Works great, arrived pretty fast even with the shipping problems due to covid. PCB quality is great too! :)

Response from Electronic things... and stuff | Oct. 27, 2020

Thank you Ralphy! :)

Lukas | June 19, 2020

looks good. shipped quickly

For Eurorack Power Bus - 26

Blahh. havnt built it yet, but looks good. would order again.

why should i write more than there is to say.

Response from Electronic things... and stuff | June 19, 2020

Thank you Lukas! Contact me if you have any trouble.
Have fun!

Bardet | June 14, 2020

The best protoboard for Sdiy !

The best way to test or build an electronic project ...

first, the board is vey well organized, raws, pots location, numbers of pad is ok for law and medium sdiy project like filters, lfos, vcas,...
sometimes i link two board for bigger projects !

the pcb pads are good quality, all stay ok after some or many solder, de-solder, re-solder operations.

the location of the pots and jack perfect feat to my panel design !

also, the location for decoupling and reverse protection is perfect and very much appreciated.

in conclusion

perfect for me

perfect for Sdiy project ! Go !

Response from Electronic things... and stuff | Dec. 2, 2020

Thank you very much! Have fun!

Jamie | June 9, 2020

Well-designed and easy to build.

This LFO does what it needs to and is an easy build that is well designed. Communication with David was excellent!

Response from Electronic things... and stuff | June 9, 2020

Many thanks Jamie! :)

Herman | June 8, 2020

great lfo

-easy to build
-does it job (ok.... 2 waveforms... so what?)
-looks nice... black with silver text, I love it.
-top price quality ratio..

Response from Electronic things... and stuff | June 9, 2020

Hey Herman, thank you very much! Have fun!

Frederick | March 25, 2020

Best quality for the price. Flexible with many options.

I bought 2 PCBs and received them in Canada after a reasonable 2 weeks (I expected longer since it was in COVID-19 times). The boards are made of top quality, stiff and thick material. All components are clearly marked on the silkscreen, making it a very easy build. I really can't praise enough the Interactive BOM he provides... I really wish I had that for all the other builds I made! It saves so much time.

I installed and connected both boards inside a custom 85HP x 7U case and they fit perfectly. Commercial powered eurorack cases are all too expensive, so this product made me save a lot of money and the result I get makes it as good (if not better) than a commercial solution! I give this product a well deserved 10/10 :)

Paris | Feb. 6, 2020

Excellant Kit and super flexable

I was excited when the kit arrived , well worth every cent , easy to build and customer support was fast for any questions , well done .....
a small documentation would probably solve a lot of questions ,I found some of my answers in the product description during the build. How ever the build is very straight forward plus I would not hesitate to buy more kits from Tindie.
Thank you for a fine , high quality kit

Jonathan | Dec. 23, 2019

awesome! Got here quick toooooo

Quality protoboard, nice size. Even came with a nice handwritten note :)
Looking forward to prototyping the beeeeeep out of something over the holidays!
I'll be ordering more in the future.

Thank you
Jonathan

PS I gave a 5* for documentation because its a mandatory field not because it has or needs documentation

Patryk | Oct. 30, 2019

Great Deal

Thank you for this PCB. Great and clear product. Good shipping, coming fast.
Thank you for you write notes inside :)
Fully recommended Seller, here can i buy it next time.

Cheers

Jose Maria | Oct. 23, 2019

Modular synth

Todo perfecto. Trato profesonal, entrga de los pedidos en un tiempo rapido. El producto Tindie inmejorable.
Un saludo

Javier | Oct. 2, 2019

Smart little pcb

Easy to setup and cheap. A smart solution to attach the pcb to the pannel. Sure that can be improved or completed with other PCBs, for example, without the power pins and with the same hole spacing. Thanks a lot.

Hedi | Sept. 28, 2019

Just great!

For DM77 - Eurorack Drum Module

Great diy project!Among many projects this dm77 progressed version of the coron ds8 is a definate winner.

Response from Electronic things... and stuff | Sept. 28, 2019

Wow! Thank you very much Hedi! :)

Sebastijan | Sept. 25, 2019

Great LFO

Easy to build, nice alu-panel and great functionality. I love this LFO!
David sent a nice personal massage on little post-it, this kind of stuff I like very much!
Strongly recommended!

Response from Electronic things... and stuff | Sept. 25, 2019

Hey Sebastijan!
Thank you very much for your nice review.
I'm happy you appreciate the Simple LFO :)
Have fun!

Frederick | Sept. 18, 2019

Easy to build. Great price/value. Wide LFO cycle range.

You never have enough CVs! Quick to build and cheap. Took me around 2,5 hours to build (started with the PCB + Panel only). Worked the 1st time.

The one I built delivers cycles ranging between 90 sec (0.01 Hz) and 7 ms (142 Hz) and keeps it's frequency pretty stable over time. Great value for the price. David is a serious dedicated designer with top-notch quality products.

Response from Electronic things... and stuff | Sept. 18, 2019

Hi Frederick!
I'm really happy you like the Simple LFO!
Thank you very much for your kind words!

Georgi | July 12, 2019

Very good for starters!

Yet another high quality item by David! Very simple to build and professional looking PCB! Also the personal note in the envelope is always nice touch. Definitely will order more soon. Thanks!!!

Response from Electronic things... and stuff | July 13, 2019

Thank you so much for the kind words! I hope you enjoy your LFO!
David ツ

Georgi | May 17, 2019

Great quality and attention to detail.

Arrived on time and even had Thank you post-it handwritten message form the seller inside! The board is very good start for building your own DIY eurorack synth. Recommended!

Response from Electronic things... and stuff | May 17, 2019

Martin | Jan. 6, 2019

Great PCBs!

This PCB is the most versatile on the Net. The build quality is great and you get a perfect product for suppliyng your Eurorack system.

Thanks for the fast shipping and the great PCB!

Martin

Response from Electronic things... and stuff | Jan. 6, 2019

Thank you so much Martin for your kind words!

Jez | March 31, 2018

Great designs

I'm excited this item - I've got a few pre-built modules and some kits in my rack but this will open up my rig to some of the specific things I want to build with out fiddle vero board 10/10

Jez | March 31, 2018

Perfect item!

For Mini Dual Power Supply

This is the perfect solution for replacing the 9v batteries in my MFOS Mini Sound Lab. It's a great design which is really compact and with attention to details such as an LED for each rail as well as test points.

Great customer service too - a slight hiccup on the delivery was rectified in one message - a no nonsense merchant gets my vote every time!

Dale | April 12, 2017

Works great

The Eurorack Stripboard PCB is great for trying out prototypes and one-offs. Easy to use and fits nice behind a panel. Using one for a mixer expansion for the JH Living VCO and one for a simple LFO. Would love it if there could be 5 connection points on both sides of the center while still keeping the ground connection on both sides. Since many op-amp circuits need a feedback resistor, bypass cap and an output connection is gets a little cramped on the side with only 4 connection points. That is the only thing that I would change. However it is still very useful and flexible as it is. Love it.

-Dale

Response from Electronic things... and stuff | Aug. 22, 2017

Thank you Dale! I'm glad you find it useful. I'll see how I can improve the number of connection points in a future version.
David.

Mike | Jan. 25, 2017

Awesome little power bus

Just what I needed for plugging in my experimental modules to my bench supply while developing them, the extra 3 pin headers are perfect for plugging into breadboard jumpers to power breadboards too! The SMD resistors are huge and you should have no problem soldering them.

Response from Electronic things... and stuff | Aug. 10, 2017

Thank you Mike! :)
I also use one myself the exact same way, plugged to my bench supply, for testing and debuging freshly built modules.

Karl | Nov. 5, 2016

Great Eurorack bus kit at an awesome price

The kit came with all the required pieces and included a high quality PCB. It was easy to put together and powered up with no problems the first time. An additional perk is that you only need to supply the +/- 12v and it takes care of the 5v bus.

Shipping was pretty quick, especially considering it came from France to Texas :-)

Michael | Dec. 9, 2015

Great product

For Mini Dual Power Supply

This power supply works very well. The seller went above and beyond to make sure I got what I needed.

Justin | Oct. 12, 2015

Great power distribution

Great power distribution if your looking for something small and compact. Option to have the SMD pre soldered is nice. Great product and fast international shipping! Review Image

Paul | May 21, 2015

smallest eurorack power connector