Tindie

Avatar

Digital Measure

100 orders since Sep 05, 2020

3 Reviews

Kosice, Kosice, Slovakia

Ships from Slovakia.

Voltmeter with USB interface

Voltmeter with USB interface

Digital Measure

$26.00

TCP/IP voltmeter & relay

TCP/IP voltmeter & relay

Digital Measure

$63.00

IP voltmeter - 8 channel

IP voltmeter - 8 channel

Digital Measure

$63.00

IP Voltmeter/Ammeter v2.2

IP Voltmeter/Ammeter v2.2

Digital Measure

$62.00

About

Longtime programmer and I'm interested in IoT.

Shipping Policies

No country selected, please select your country to see shipping options.

Rates to

Reviews

Review Breakdown

5
1 4
0 3
2 2
0 1
0

Average Ratings

Product: (4.33)

Documentation: (3.33)

Shipping: (4.00)

Communication: (4.00)

Don | Feb. 27, 2024

Good but..

For Voltmeter with USB interface

As described the unit is a small module that measures DC voltage and displays the result on a computer.
The pcb is well laid out and professionaly done.
The measured voltage is accurate to 1 mv or better.
The shortcomings are mainly no instructions of any kind on how to use the simple software.
For this reason I find it to be of limited use for any real data-logging application.

Michael | Feb. 16, 2024

USB Voltmeter Monitor

For Voltmeter with USB interface

Works Great! Use it to monitor voltage output of monitor pins for Ham Radio Khune Electronics amplifiers and transverters. Took me a minute or two to figure out how to unpack the software, etc. as I am not a software guy, but it worked out fine. Thanks for a fine product... What I really want is a USB voltmeter with 4 channels, similar to the IP version.

Thanks again, 73 - Mike - KM0T

Christoph | June 8, 2022

5

For TCP/IP voltmeter & relay

Documentation comes via email and shows everything of importance.

It is really just plug and play!

Connected it to a 12V PoE splitter, it got a DHCP lease right away. I connected the first voltage meter port to a solar batterie, connected to the IP via web browser and could immediately read the voltage value.

One small fault is that the label on the PCB for the relays are in the wrong order.

After discovering all SNMP OIDs, it was trivial to read and write with Home Assistant.

The board design looks very clean and solid.


Awesome!
Cookies help us deliver our services. By using our services, you agree to our use of cookies. Learn more.