Petit Studio

4,028 orders since Apr 25, 2014

Ota, Gunma, Japan

Ships from Japan.

View Store

I hope you will enjoy my designs made to help your electronic development.

Overall Rating:

Review Breakdown

Average Ratings

Product: (4.73)

Documentation: (4.04)

Shipping: (4.54)

Communication: (4.37)

All Reviews

Andrew | Aug. 10, 2020

Great Product - can be used for LCD too!

For Pi Camera HDMI Cable Extension

I got this for the Raspberry Pi camera , but didn't need it in the end for the camera as I changed my project design (for the better), however I just tried it with the official 7" LCD screen and it extends that over HDMI too - I used a short HDMI cable (80cm) and it worked perfectly , so now my screen can be separate from the pi.

When I bought these (pre covid) the item arrived really quickly into NZ from Japan.

Cheers for an excellent little product.

Mirko | April 21, 2020

It was exactly what I was looking for

For Pi Camera HDMI Cable Extension

I'm working on a big project / invention. I created a climate controller / grow assistant that helps people grow their medicine at home. It's called "Antheia". The heart of Antheia is a Raspberry Pi. One day, I want to sell it (here). So I have to make a beautiful and easy to use case for it. Antheia comes with a lot of sensors (Temperature, Humidity, Light, pH, EC, Water Tank, Soil Moisture, CO²) and they all have to be connect to the Raspberry Pi as easy as possible. Antheia comes with a camera too. So you can look at your plants without opening your grow box and destroying the micro climate you created. To connect the camera I'm using this product here. It's the only solution on the market that works without opening my Antheia Box and connect the camera directly on the board.
It's a little annoying that it comes from Japan. So it takes over a month to be delivered to me.

Sm Hasanur | March 10, 2020

It does what it is supposed to

For Pi Camera HDMI Cable Extension

It arrived quite early(5 days, not really long). Did not check the images provided on the product page(silly me!) and it did not work first time. Then check the images, reconnected and it worked. So it did what it is supposed to. But if possible, the price should be cut down a little more to attract more customers.
Setting communication to OK as I did not talk to anyone.(I guess thats what communication rating is for)

Steinar | Feb. 11, 2020

A very fine product. It solves a common problem.

For Pi Camera HDMI Cable Extension

This is a Great product. This was exactly what I was loking for. It solves my problem with extending the camera of My raspberry, since I want the Cam in an other place than the raspbian. So far I have only tested this with still pictures and with a 2 meter HDMI cable. it worked great. For My use, this is perfect.
for an future improvement, why not make some adapter with mini/micro HDMI. But thanks anyway.

Alex | Feb. 3, 2020

Pi 3 model B with 7" Touch Screen

For Pi Camera HDMI Cable Extension

Great little product. Used with my 7" Touch Screen for an in-car infotainment system, and works exactly as expected. Plug and play with no instructions required, shipping was fine and very reasonably priced. Thanks!

Charles | Dec. 26, 2019

Useful product--one or two were DOA.

For Pi Camera HDMI Cable Extension

We have used quite a few of these and find them very useful. At least one, however, had a bad solder connection.

Otto | Oct. 5, 2019

Good Product

For Pi Camera HDMI Cable Extension

Works as inedndet, the probles I had were caused by a defective HDMI cable.
Sharing the dimesions of the board (including holes) would be the last thing needed to make it better.

Brian | Aug. 3, 2019

FAILED???

For Pi Camera HDMI Cable Extension

Do not work for me "Video Stream Not Loading"

Tindie Order #157471 July 9, 2019, 6:46 a.m.

Pi Camera HDMI Cable Extension Unit Price: $14.95 Quantity: 1

NOTE with, ribbon cable which works, my Infrared Led's Light but with the extension thy do not light Implying no power to the Camera:-

5MP Kamera Modul 72° IR Schnitt Nachtsicht LED Fülllicht für Himbeer-Pi B 3/2

Cable used:

PREMIUM HDMI Cable v2.0 HD High Speed 4K 2160p 3D Lead 1m/2m/3m/4m/5m/7m/10m [5 Metre]

Jessica | June 23, 2019

It works well / Ça marche bien

For Pi Camera HDMI Cable Extension

GND modification required (not mentioned in original materials) but very easy on version 2 circuit boards.
Thanks
---
Modification GND requise (non mentionnée dans les documents d'origine) mais très facile sur les cartes de circuit imprimé de version 2
Merci beaucoup

Jim | April 27, 2019

GREAT ITEM!

For Pi Camera HDMI Cable Extension

A really good item that does the job as described. Attaches to the camera pcb or can be mounted separately

Rene | March 28, 2019

Nice product, good service!

For Pi Camera HDMI Cable Extension

Quick delivery of a good product for a good price. Allows easy connection of the Pi HDMI camera to the Pi 3.

Tomasz | March 9, 2019

Not bed, could be better

For Pi Camera HDMI Cable Extension

Comparing to the same Extension from another manufacturer it's less compatible with HDMI cables. I've tested it with 5 different cables from 1 to 8m and this product didn't work with 3 of them, while another manufacturer's extension didn'd work only with 1 cable.
I've tested 2 sets from Petit Studio And also 2 sets from another manufacturer.
Shipping fas very fast, but CSI ribbon cable had strong prints propably from sharp parts of the extension - so it should be secured better.

Exalon | March 5, 2019

Great buy

For Pi Camera HDMI Cable Extension

Great boards for deploying camera in awkward places. Fast shipment. Arrived in slightly more than a week across atlantic ocean.

Mustafa | Feb. 14, 2019

It works as expected.

For Pi Camera HDMI Cable Extension

I tried it with picam v2.1 using a 2mt hdmi cable and it works without a glitch. shipment is very fast arrived in 10 days.

Michal | Feb. 8, 2019

Highly recommended!

For Pi Camera HDMI Cable Extension

Great product, package and delivery. Works as advertised. Extending the Picam cord via HDMI cable is genius. Thank you.

Adam | Jan. 25, 2019

Does exactly what it says, in a brilliant little package! <3

For Pi Camera HDMI Cable Extension

Brilliant little hack. I can't wait to see what I can shove down the 4 extra lines too! There are so many different ways to make use of this!
:D

Kevin | Nov. 12, 2018

Works great with the Pi LCD Touchscreen!

For Pi Camera HDMI Cable Extension

I have a set connected to the display connector and an official Pi LCD Touchscreen with a 2M HDMI cable and it works well. Display quality and touch response are unchanged. I used one of the unused pins to route 5V to the display so I don't even need a remote power supply for it.

Rd: Mads Vilms | Oct. 14, 2018

Everything as expected, amazing

For Pi Camera HDMI Cable Extension

A couple of days transport from France to Denmark. Product work exactly as promised. Just ordered 12 more.

Benjamin | Sept. 3, 2018

Everything perfect

For Pi Camera HDMI Cable Extension

Super nice product with a good finish. Hadn't time to test everything, but for now I'm happy with it.

Joel | Aug. 14, 2018

Great product

For Pi Camera HDMI Cable Extension

Thanks very much, really helped me out with my car rear view camera. It only worked with HDMI Highspeed with Ethernet, other HDMI Cables did not work.

Øyvind | July 18, 2018

Works great, but it depends on the cable

For Pi Camera HDMI Cable Extension

Tested with both a v1 and v2 camera, same results.
Worked fine with a short cable and a 3m cable.
Also worked fine with one 5m cable, but with another 5m cable, it didn't,
and there's no apparant difference between the two 5m cables.
DC resistances roughly the same: 4.5-5Ω (per wire) for the differential pairs and 12-13Ω
for the single wires. Didn't measure the impedances, so dunno if there's a difference there.
On the bad cable, the camera is deteced (no errors from raspivid), so the I²C bus must be
working, but there's no video signal, which raspivid complains about after a timeout.
The bad cable probably dampens the clock and/or data lines too much, but works fine when used on HDMI.
All cables tested needed the HDMI_Shroud-to-Camera_GND solder
joints, as the shield pins (HDMI pins 2,5,8,11) aren't connected.

Julian | July 12, 2018

Good product, bad comunication

For Pi Camera HDMI Cable Extension

It's a good product, the documentation its very complete... but I did some questions to the seller and the answer was very slow or inexistent

Martin | June 22, 2018

Good, works as expected, even included extras for mounting

For Pi Camera HDMI Cable Extension

Product was as described, work as it should. Seems solid. Thanks for the extra screws for mounting the card on the camera itself!

Ian | May 7, 2018

Fantastic idea

For Pi Camera HDMI Cable Extension

I've been using a PiCam for a while. Mostly to take video from a microlight aircraft. The one annoyance with the PiCam is the stupid ribbon cable. If you want to use the camera anywhere away from the Pi case, the ribbon cable can be a pain. This simple solution is brilliant.

The only complaint is that the documentation for the orientation of the adaptor could be clearer. Took a bit of working out to get it all connected correctly.

Kamil | April 10, 2018

Good product and seller

For Pi Camera HDMI Cable Extension

Very good quality and packaging. Shipment was very fast. Easy to assemble. I have tried 8 meter HDMI cable without any problem.
I would recommend this seller.

Gordon | March 18, 2018

A useful addition which would be very difficult to fabricate

For Pi Camera HDMI Cable Extension

The camera extension kit arrived quickly and was well packed. There were no instructions included but these are published on the website so there was not a problem. The kit was very easy to assemble; fortunately, my camera was supplied with a fairly long lead attached to it so it was possible to use this lead on the RPi end. The one supplied with the kit would have been too short. However, apart from that, all worked well and the build quality is good. I would recommend this kit without hesitation.

Rafael | Feb. 11, 2018

Great Product

For Pi Camera HDMI Cable Extension

Using this with my raspberry pi 3.

Works great! This is my second purchase and I would highly recommend it.

The additional lines (a,b,c,d) were perfect for my intention and
I was able to connect the raspberry Pi3's I2C's SDA and SCL lines to a BME280 pressure, humidity, and temperature sensor. The 3.3V and GND on the board powered the BME280. Hooked it all up to a 15 Foot HDMI cable and I not only get the picture I also get the use of the THP sensor.

Great Product!! Thanks!!

Ross | Dec. 8, 2017

Great product

For Pi Camera HDMI Cable Extension

The extension did the job. The packaging was good and all the parts assembled easily. Good quality and size will buy again.

Milco | Nov. 13, 2017

Very nice product good quality, works like a charm.

For Pi Camera HDMI Cable Extension

Needed this for monitoring my 3d printer, this way there was no need to build it myself.
Thanks very much.

Dominic | Oct. 30, 2017

Excellent product and seller

For Pi Camera HDMI Cable Extension

The product is as described, it is well made and simple to use. It comes as a kit with the various screws, spacers and ribbon cables, all of which fit perfectly.

Sébastien | Oct. 24, 2017

Excellent

For Pi Camera HDMI Cable Extension

Perfect to extend my camera connection. Using 15feet Amazon basics Hdmi cable
Very fast shipping from France to Canada.

Pascal | Oct. 14, 2017

Pi Camera HDMI Cable Extension

For Pi Camera HDMI Cable Extension

I use this product as a hobby at home.
Everything works fine.
The delivery was perfect.
I would gladly recommend your site

Pieter | Oct. 4, 2017

The unit works well!

For Pi Camera HDMI Cable Extension

There are many projects where the camera is installed remotely - so this is ideally suited therefor. I have use this solution to mount the camera more than 8m away on a moving truck and used a 10m long High Frequency Type 1.4 HDMI with Internet cable - off the shelf from local MAKRO store. There are no interferences whatsoever, the picture is crystal clear. With a clever trick to overcome a 3.3V supply voltage drop over longer distances, it may be used with even longer cables. Highly recommended.

Noel | Sept. 14, 2017

This an excellent replacement for a long ribbon.

For Pi Camera HDMI Cable Extension

I will be using this in a telescope autoguider application using a raspberry pi and the nior camera. A ribbon cable would be unacceptable for the application. Github-Gordon 999 has what appears to be an excellent software package. This is a work in progress and has not been used in the application but only bench tested at this time. The only item which each application requires a special solution is the raspberry pi end as it is dependent upon the pi packaging. The pi end should be firmly mounted to keep the connections from pulling out. The camera end housing end is a modification of Thingiverse housing and a 1 1/4 eyepiece adapter modifcation. It helps if you have access to a 3D printer.

Page 1 of 5