Tindie

Avatar

MuseLab

857 orders since Mar 06, 2022

yiwu, Zhejiang, China

View Store

Notice For EU Buyers: VAT is already included in Shipping Rate, Thanks

Overall Rating:

Review Breakdown

5
6 4
7 3
3 2
0 1
1

Average Ratings

Product: (4.59)

Documentation: (3.88)

Shipping: (4.53)

Communication: (4.12)

All Reviews

Justin | Aug. 30, 2024

Cannot hold my 1.6 kg antena.

For The AntRunner Rotator

I bought a 3.37 lbs antena from Noolec and spent the time setting it up with the combo and the rotator cannot lift up the antena from zero degrees. It skips gear teeth. If you assist it it will lift it up but once you get it at a 45 degree angle is proceeds to hard drop then antena back to zero degrees.
Avatar
Response from MuseLab | Aug. 30, 2024
Hello, it is better to fix the center of gravity of the antenna on the bracket, which will be more stable

Eris | June 20, 2024

Well packed and quickly shipped

For CMSIS-DAP/DAPLink Debug Probe

Each item came in their own anti static bag and was securely packed within multiple layers. The dongles are a great value but only come with 4 DuPont cables so you might want to pick up a cheap set if you’ll need any more

Eris | June 20, 2024

Quick and great value!

For iCESugar-Pro FPGA Development Board

Great value for the specs and quickly shipped!
A note is that the design could possibly be revised to move the on-module type c port to a section where connecting to it isn’t blocked by the pins

Jeremy | May 27, 2024

Works really well

For PDTricker Fast Charge Deception Tool

Works as it should, though you'll have to carefully select an appropriate USB supply to take advantage of all the voltage modes.

I don't really remember how shipping, documentation, or communication was, but I will give it a five anyway because it says I have to and I am pleased with the product.

Donald | April 17, 2024

Can't find .bat file

For The AntRunner Rotator

Like someone else in the reviews I downloaded Hamlib and connect the rotor and I cannot find the AntRunner_Start_Serial.bat file to edit my com port!
Avatar
Response from MuseLab | Aug. 30, 2024
Hello, the bat file is located in this directory
https://github.com/wuxx/AntRunner/tree/master/software/hamlib-w64-4.5~git

Ron | April 5, 2024

Amazing

For The AntRunner Rotator

It works and is more accurate than I expected. The packaging was very good.

I did have one problem. A PCB standoff screw vibrated loose and it jammed the azimuth motor. I caught it before it caused any damage.

Works very well with Gpredict, I have also used SatDump which has rotator control now.

If anyone is having trouble on Linux, you may need to disable/remove BRLTTY in addition to setting dialout permission for USB serial connection.

Sam | Feb. 20, 2024

Helpful assembly tool

For 2.54mm PCB Probe Clip

Great construction, seems sturdy enough in the right places, and will certainly make my life a lot easier.

Julian | Dec. 10, 2023

Great product and great seller

For iCESugar FPGA Development Board

It's a great and versatile FPGA-board and works as described. The documentation and examples are easy to understand and well done. Also the seller was very helpful and responded fast when I messaged him.

Jack | Aug. 23, 2023

Well built and great footprint.

For The AntRunner Rotator

Just received mine today and having one small problem. Can't find the AntRunner_Start_Serial.bat file in the HamLib directory that is mentioned in the documentation. Need to modify this file to get things going. Thanks

Matthew | March 20, 2023

Such a neat little board

For nanoCH32V003 Development Board

I saw how much the bare chips were going for and couldn't believe it so I had to get the dev board. This particular dev board looks to be the best deal and smallest currently on the market. The MoanRiver IDE is a bit odd but after going over several you tube videos I got it to work. I couldn't get the linked Cjacker GPIO blink example to compile. However I found this repository works https://github.com/openwch/ch32v003. This board is definitely more work to get going than Circuit Python or Arduino. There might be boards with a more streamlined experience for jumping into RISC-V than this one. The reason to buy this board is to test yourself to do as much as possible with the most inexpensive 32-bit RISC-V microcontroller. It is still a little to hard to work with to be replacing a PI pico for beginners. Perhaps soon that will change.

Hans | March 17, 2023

Boards work great, the documentation is also quite good.

For nanoCH32V003 Development Board

Bought a few boards and a link/programmer board, after reading the documentation I was able to compile and upload my first program.

Derek | March 3, 2023

Well made. Looks good.

For The AntRunner Rotator

It is well made and looks good.
I will be testing it in the coming days.

The rotator and BoM is as described.
The controller is positioned under the top elevation bracket to reduce long motor cables.
USB and Power cables need to be long enough to not tangle when operating.

Thanks

Luke | March 2, 2023

As described - thanks!

For nanoCH32V305 Development Board

Just did minimal testing so far. Took a while to arrive, likely due to Chinese New Year. There is a Github available with some basic examples.
The WCH EVT will have more examples available (also on GitHub)

Well packaged & the LCD option looks great!

Luke | March 2, 2023

As described - thanks!

For nanoCH32V203 Development Board

Just did minimal testing so far. Took a while to arrive, likely due to Chinese New Year. There is a Github available with some basic exa
The WCH EVT will have more examples available (also on GitHub)

Well packaged. LCD option looks great++

William | Nov. 19, 2022

Excellent board

For iCESugar FPGA Development Board

Great value board! Shipped out fast and everything worked as expected. Only issue I found: it's a little annoying that some of the PMOD ports are labeled on the bottom, whereas the modules themselves are labeled on the top, meaning you need to keep flipping the board back and forth while you're writing your pcf file to make sure you've got the connections right. I realize that space is limited on the board itself so the placement of those labels is necessary, but it would be nice if the pinouts on the PMOD boards were labeled on the top *and* bottom for convenience.

Janrinze | July 11, 2022

Well packaged, all looks great. very happy.

For iCESugar-Pro FPGA Development Board

The package arrived in prefect shape. All items are shipped in anti static bags and nicely fit in the box.
I still need time to test the FPGA board but i love the design and the wide connectors.
Muse Lab makes nice boards. Definitely recommend these people.
Hopefully they will add a ECP5-85k with -8 speed option in the future that would be the pinnacle.
In all. very happy customer here.

Pete | March 19, 2022

Very nice board

For iCESugar FPGA Development Board

Really nice little board, excellent quality and brilliantly priced. Would buy again without hesitation. Thank you !
Cookies help us deliver our services. By using our services, you agree to our use of cookies. Learn more.