Tindie

Avatar

Travis Lin

5,043 orders since Apr 11, 2016

Nanjing, Jiangsu, China

Ships from China.

View Store

Overall Rating:

Review Breakdown

5
81 4
58 3
23 2
6 1
6

View All Reviews

Average Ratings

Product: (4.60)

Documentation: (4.07)

Shipping: (4.39)

Communication: (4.53)

All Reviews

Mark | Oct. 7, 2017

Great bit of kit!

For DSTIKE WiFi deauther OLED V3.5 (Added RGB LED)

Works exactly as intended, very well constructed, going to have a lot of fun with it I'm sure!

Only minor niggle...the case, if you've got chunky fingers it gets in the way..apart from that, great!

Joe | Sept. 26, 2017

Very good.

For WiFi Packet Monitor (Preflashed D-duino-B)

Good product, works very well, monitors WiFi stream. Just power up and works right away.
Nice work.

Thomas | Sept. 21, 2017

So far everything is perfect

For DSTIKE WiFi deauther OLED V3.5 (Added RGB LED)

The board reched me in good condition and in a timely manner. Good packaging, it survived the journey around the globe without problems. I've been working in networking business for quite some time and also did planning and installation of WiFi for a few hundred simultaneous users.
When I recently learned about the existence of this device, it made me curious. Maybe it become a valuable tool . I should read the available informations first....naaa, fire it up and play with it. ;-)
Perhaps someone figures out a way to remote control this device from a smartphone?
Thanks for your effort in building this.

Adrian | Sept. 16, 2017

Gorgeous device I have been waiting for

For DSTIKE WiFi deauther OLED V3.5 (Added RGB LED)

I love it! Now I can finally reach the rest of the world with my 24 dB parabolic antenna ;-). Compared to V1 with ESP-12E: The OLED is bigger and glued better, so it does not tilt any more (was also a problem with D-duinos). Much better button ergonomics. The "case" (actually a plate) is a very good idea, but I should have two of them: One on top (as intended) and one on the button, with four 20 mm hex posts. This would also allow for anchoring the antenna adapter cable at one of the posts or on a cable tie pad.

Brian | Sept. 12, 2017

Great product, very high quality

For DSTIKE WiFi deauther OLED V3.5 (Added RGB LED)

Had a issue and seller was very helpful. Great product highly suggest buying. Product is very nice seems well thought out with a plastic guard even.

Markus | Sept. 12, 2017

Nice device and really nice support

For DSTIKE WiFi deauther OLED V3.5 (Added RGB LED)

This device works like a charm. Using it since some days now, no problems.
Also I was in contact with the producer, he always gave good answers regarding the questions I had.

Only thing which could be improved is the placement of the screen, had to remove and attach it again, it was not even on the board. Also the power button should be changed, hard to reach it sitting between the power supply and USB port.

Josh | Sept. 11, 2017

Interesting tool for working out IoT connection issues.

For DSTIKE WiFi deauther OLED V3.5 (Added RGB LED)

--- Edit 6 Nov 2017 ---
I ended up with a V2 board, and it is a big improvement over 1.5 -- Follow up support was awesome.
Works great! I would say if you are frustrated by the 1.5 buttons, that alone makes a worthwhile upgrade, if you use it regularly. Buttons/power works as expected now. (While I understand the software is someone else, it still could use improving; ** the hardware ** is much better over the previous version. Can't wait to see what comes next.
------

I use this to work out my logic for when there's something wrong with an IoT's connection.
The self-contained UI needs a lot of work (I have over 30 wifi ssid's listed, and pressing up and down 40-50 times to highlight & return is annoying.

The most annoying thing is that if the battery drains, and I swap out a new battery, it won't actually power up until I connect a usb cable; once I do, I can disconnect and power on the unit.
The built in UI has no way to change the time out period.
All in all, it works as advertised, and is a nice compact size. I am unable to get any data/ui/info from the serial connection when connected via usb to a serial monitor. Never heard back from the vendor on issues I am having.
Avatar
Response from Travis Lin | Sept. 11, 2017
Thank you for your feedback. Now V2 is not perfect still a lot of things need to be improved.
I have already started designing V3. What I can do is hardware, for software I believe spacehuhn will release a better version next time.

James | Sept. 9, 2017

Battery Backup

For DSTIKE 18650 Pi Partner Kit

Bought these units as a possible UPS solution.
Not quite there for UPS functionality, more for portable on-the-go RPI use.
Brown-outs cause a RPI reboot due to slow switch between USB -> 18650. (Can be fixed by supercaps/ultracaps on available 3.3V and 5V respectively)
USB power restoral works as expected (no power interruptions).

SPI and I2C are strictly passthrough, no intelligent software and no interrupts nor high/low. Other GPIO are for board stability only, and are strictly passthrough as well.

5 LEDs work as expected. There are no LED I/O ports.

Emmanuel | Aug. 29, 2017

The pentester's friend

For DSTIKE WiFi deauther OLED V3.5 (Added RGB LED)

I received the WiFi deauther OLED V2 bubble-wrapped in a box big enough to survive the great dangers of shipping :-)
The deauther was in perfect shape, pre-flashed, and worked out of the box.
Technical support is fast and efficient, got my questions answered in minutes.
I also very much appreciated the communication efforts for transparency.

Some UX ideas after use:

- Small buttons are unfit for big fingers, and once the case is in place, even small fingers can't fit. Using a 5 way momentary push button (SMD version) instead of the momentary buttons would be a nice upgrade.
- Using a on/off switch instead of a momentary button would let users turn the deauther off while it's charging (faster charging).

Great product for education & research but also for testing my WiFi devices :-)

Jermain | Aug. 29, 2017

Great device. Works great.

For WiFi Packet Monitor (Preflashed D-duino-B)

Great device. Works as specified. Great workmanship. Keep it up. I would definitely buy from this supplier again. Great products at great prices.

Emmanuel | June 22, 2017

Works just as expected

For DSTIKE D-duino-32 V3

Fast delivery time, neat product, lotsa fun in perspective !

I have nothing more to say about this but the review form expects at least 100 characters

Emmanuel | April 10, 2017

Great combo

For D-duino-32(ESP32&0.96OLED display)

This is a great generic combo for all sort of projects, shipped fast in a very solid box with bubble wraps, I can't wait for the RGB version

Mark | Oct. 12, 2016

If you want to buy a I2C OLED buy this one - great work

For 0.96 IIC Tiny OLED

Tested a lot of other I2C OLED boards, most of them where trash.

This board is using 4.7 K pullup resistors for SDA and SCL.

I am using this OLED with Espruino on ESP8266 with module SSD1306

unboxed, hooked up and start playing around without any trouble at all.

Many thanks to Travis Lin for building such a nice easy to run oled board !
Page 3 of 3
Cookies help us deliver our services. By using our services, you agree to our use of cookies. Learn more.