Peter | Sept. 20, 2021

Great Product that is very usefull to solder SMD.

For Solder Paste Dispenser USB 5V Elec. Pressure/NoAir

I used it for soldering 1024 super small smd leds "Geekcreit LED Musik spectrum clock" and it worked awesome to deploy the solder paste to the tiny pads. Great Product and super fast shipping (~1000km in 2 days).

Response from Mike DIY Store | Sept. 20, 2021

Hello Peter,
I am glad that you have success with my dispenser and you are happy with this device.
Thank you - keep on dispensing & soldering!
Mike

Ahmet Yilmaz | May 25, 2021

very nice tools...

For Solder Paste Dispenser USB 5V Elec. Pressure/NoAir

I bought one of this device. The seller was in contact with me on every subject and he was a writer, thank you very much.The dispenser is a very practical compact product and useful. Today I practiced it for a short time.. I can say that I am very pleased. I am still in contact with the seller, answering my questions without getting tired, very patient.

Response from Mike DIY Store | July 11, 2021

Thank you - keep on dispensing & soldering!

Milan | Jan. 6, 2021

Super solder for super money

For Portable Soldering iron for Weller RT tips, 12V DC

It is a pity that the cable to the soldering tip is not included in the delivery. Otherwise I rate 100%

Response from Mike DIY Store | July 11, 2021

Thanks - keep on Soldering !
Mike

Timo | July 26, 2020

Great Product, No-Brainer

For Portable Soldering iron for Weller RT tips, 12V DC

Very good soldering station for an incredible price, absolute bargain. Heats up very fast, is small and compact and easy to use.
Packed it into a standard housing, put a standard sensor cabel as handle cable, a chinch connector and a 12mm alu pipe as handle itself, and a reedswitch and magnets as standbye detection. Works absolutely fine.

Short heatung up video of my station:
https://www.youtube.com/watch?v=vCXsG6o-W7w

Response from Mike DIY Store | July 26, 2020

Thanks Timo - Nice enclosure!!
Keep on soldeing!!
Mike

Sandra | Nov. 27, 2016

Great all around product

For Solder Paste Dispenser USB 5V Elec. Pressure/NoAir

I am a first time Tindie buyer. The product I bought is intended for use in electronics but I use it for my art. I use tacky glue for applying beads to various surfaces. The first i used was a regular syringe and then i moved on to an airpen ( basically another syringe but using air to push glue through syringe). Both really hurt my hands after a long period of use, the latter being too noisy to use and loss of compression. Now onto the Solder Paste Disepenser. It took a little time to get used to using it but Mike does have tutorials on his Youtube page and his blog page. He made it simple a great. No more hand cramps. Ease to fill up with the three way valve. This little product can handle the tacky glue semi thick viscosity. I love the option to change speed and reverse option. I have only used this product for 15 minutes at a time and it handles well no overheat. I will keeping on testing it. Best of all NO NOISE. That makes a big difference when I have the urge to do art early in the morning or late at night. Great communication with seller. Kept me informed when I had any concerns.

Response from Mike DIY Store | Nov. 28, 2016

Thank you Sandra and please contact me on my email.
I am in a phase of bringing out to World a new Toy .

Mike

Sergey | Aug. 1, 2016

Sergey

For Solder Paste Dispenser USB 5V Elec. Pressure/NoAir

The good, necessary device, it would be desirable to add only with its possibility of a choice a joystick direction, not all conveniently for paste giving to shift to the right. To me it is for example more convenient forward, it is in my opinion more ergonomic. And one more moment, it would be desirable to see in the future upgrades of a software possibility of adjustment of a pause, between joystick pressing that it would be possible to dose out precisely giving at great speed.

Response from Mike DIY Store | Oct. 18, 2016

Hello Sergey,
V4 of my dispenser had your view of controlling joystick and I changed it because there were requests to do so..
Well its hard to keep everyone happy but I do my best. The way it is now it is less movement of syringe while dispensing onto PCB....

thanks,
Mike

Andy | April 21, 2016

Karan | Jan. 15, 2016

Great product, fast shipping and great seller

For Syringe Paste Liquid Dispenser 5V DC USB -NEW V4

Really like the product. Great shipping and packaging too. It would be great if the seller could also give some combo options to buy solder paster and syringes too.

Response from Mike DIY Store | Feb. 19, 2016

Dear Karan,
In the meantime I have added some syringe connectors + parts to make life to you guys using Dispenser more comfortable!
I am Sorry but due to International shipping regulations Solder Paste could be a subject chemical substance import - and your import to USA (or any other country) could face customs clearance delays and could mean a lot of paperwork in order for you to import Dispenser.... Second issue is that there are so many different types of Solder paste and each guy likes his paste and it would be difficult for me to satisfy each guy needs... :-)

I am glad my Dispenser works well for you and so many others using it!

Thank you for feedback and good luck! KEEP ON SOLDERING !!
Mike

Jarek | Jan. 7, 2016

Great idea, excellent execution!

For Syringe Paste Liquid Dispenser 5V DC USB -NEW V4

Seller was very thorough in how to setup and use the dispenser, and it comes with a bunch of needle tips to use with the dispenser. I'm still waiting on my syringe adapter to come in (make sure you pick one up from somewhere!) and can't wait to lay paste on my first board.

Response from Mike DIY Store | Feb. 19, 2016

Hello Jarek,

I am still patiently waiting for your feedback! I hope all is well and you are soldering full speed!!
Regards,
Mike

Paul | Dec. 10, 2015

Works well, very pleased and highly recommended

For Syringe Paste Liquid Dispenser 5V DC USB -NEW V4

I received the dispenser after some delays in Canadian customs (the seller offered AMAZING support). The unit is solid and well built and fits well in the hand. I bought the dispenser for my first SMD project so I had high expectations and I was not disappointed. It took a few tries getting used to the operation of the buttons, getting the paste warm enough and choosing the correct dispensing needle. In 15 mins I was dispensing paste on 0402 and bigger pads without any problems (except for my eyesight!). This unit is now one of my go-to tools for building my small-run prototype SMD boards. I received the "older" version of the dispenser and the newest model looks to be even better. I highly recommend this dispenser.

Response from Mike DIY Store | Dec. 10, 2015

Thank you for your kind review!
I am glad that people appreciate my work and I am looking forward to new improvements!!

Kind regards,
Mike