NifteeCircuits

301 orders since Jun 20, 2015

Riverside, CA, United States of America

Ships from United States of America.

View Store

Overall Rating:

Review Breakdown

Average Ratings

Product: (4.15)

Documentation: (3.56)

Shipping: (4.41)

Communication: (3.93)

All Reviews

Brandon | Oct. 17, 2021

Love it!

For LED Bracelet

Great item! Love that it is rechargeable. The seller was very kind to help me with special shipping needs! Thanks!

C | June 10, 2021

No problems, good shipping

For Jumper 2-Pin - Set of 10

Have used this type of jumper in the past, wanted some on hand for future projects. Having these available is a must, since they are often lost, or left installed on a completed project.

Glad that someone was offering these for a reasonable price. Ordering direct from Digi-Key would have saved on the per-unit cost, but Digi-Key's shipping cost, in my experience, is never any less than $7.

Barry | Jan. 2, 2020

Great product & seller - Fast Delivery

For 8x8 Matrix 64 RGB Led

Fast delivery got it half way around the world in good time. Well built product and will be a great matrix panel for Pixelblaze controller.

Kevin | Oct. 26, 2019

Bad product, bad service

For LED Bracelet

Bought 6 Bracelets. None of them work. Tried resetting them. Recharging. Company didn’t respond to my emails. Buyer beware.

Brandon | Sept. 9, 2019

Love This Item!

For LED Bracelet

Bought two of these for an event in the desert. They were exactly what I wanted!
- Shipped fast
- Have lots of cool settings
- Batteries lasted all night
- Rechargeable so i didn't have to bring lost of batteries. Less waste!
- Super bright
- Surprisingly durable - they look fragile, but I haven't broken them yet!
- I used a little tape to make sure they didn't fall of by accident since I was dancing a lot
- Great price considering all the other light stuff on the market!

Note: The bracelets I received seemed like an updated version with a white sleeve that the LED device fits into. It helps the lights defuse. And there is velcro to hold it on your wrist. The black clasps in the pictures must be an older model since mine don't have those. I think the model I received was newer since it is better than what's pictured (in my opinion). Also each came with an extra white sleeve which was nice!

Thanks!

Foster | Sept. 8, 2019

Possible scam, use caution.

For LED Bracelet

Received different products than ordered (LED Bracelets). Working with seller to rectify.
Initially thought it was an honest shipping error, but I see two previous reviews experiencing the exact issue.

Kacey | Sept. 3, 2019

Not at all as advertised

For LED Bracelet

Looks nothing like what is pictured, is not adjustable, in a white sleeve with velcro ON TOP OF THE ON/OFF SWITCH. If you put it on and press the velcro together to fasten, you have to toggle the on/off switch; there's no way around it. I've accidentally turned it on so much that the battery drained before I got any real use out of it. Doesn't seem to do much beyond red, and only half the strip lights up. I haven't investigated it much since I was just disappointed in it as it came, threw it into a scrap box; maybe it will become part of another project one day. At least it didn't cost much.

Chris | June 12, 2019

Operating frequency not clear; missing SDN pin control

For SI4463 Transceiver Breakout Board

The schematic says the antenna on here is intended for operation at 902MHz ~ 928MHz. Would have been nice if that was mentioned in the description. More importantly, this board does not break out the SDN pin (which you need to properly reset the chip), nor any of the GPIOs which are sometimes helpful. Not recommended.

Byron | May 20, 2019

Great product

For LED Bracelet

I purchased 3 of these. One stopped working, but the seller was nice enough to send me two replacements for free! Wow! Thank you for your help.

Alan | May 8, 2019

It just works!

For WS2812S 8 Piece LED Strip

Does exactly what it is supposed to do, and cheap as well

There was a shipping snafu, but Solomon went above and beyond to get it sorted.

Comes with exactly as much documentation as you need: none at all. There's so much good WS2812 documentation on the internet already, include a library for every hobbyist MCU.

Luis | Feb. 25, 2019

great led bracelet!

For LED Bracelet

This bracelet is really good for parties! I attached it to a harness and looks really cool. The problem? That I ordered online from a different country and I received it without a battery even I chose the battery option. Beware that attaching the battery is not a trivial task, you will need to get it soldered to the circuit which is not something I was expecting to do. I do not have much knowledge about electronics and would recommend the seller to give more information about the product (specially for international buyers) as there might be other people in the same situation as me.

Mark | Dec. 30, 2018

Not as described

For LED Bracelet

So there's no adjustable strap; it's a strip of LED lighting with a white fabric sleeve. It doesn't look like the picture on the site. I'd like to post a photo but not an option. Also I didn't know it wouldn't come to UK without a battery as that wasn't an option when I bought it. So they've turned up without batteries and no response as to my further question. I haven't even asked for a refund as admire small sellers. Mark L

Edrolfo | Sept. 14, 2018

Best LED animated designs / programming!!!

For LED Bracelet

Got this for EDM music festivals and DJ club gigs. 😎
Best quality LED animations I've seen, with lots of variety to choose from. 🤩
No documentation included, but it's really not needed, other than holding button for several seconds to turn off... (Tindie ratings don't have a "not applicable" selection so had to choose 3 stars under Documentation... Sorry!).
Planning to replace the elastic with velcro or leather strips to resist bumps from sweaty tweakers 😜.
Easy hack for me.

Thanks!

Paul | Jan. 24, 2018

Great little power supply

For 5V Boost Regulator Board - MCP1640T

I needed a way to get accurate 5V at just a little bit of power out of a 3.2v battery pack all in a small size and good efficiency. This little board does the trick and the quality seems quite good and the price very reasonable. All in all I am quite pleased!

Paul | Jan. 24, 2018

Great little power supply

For 5V Boost Regulator Board - MCP1640T

Eli | March 20, 2017

Don't buy; does not work

For SI4063 Breakout Board

The SHD pin is grounded, and you need to be able to toggle it high and low to power up the IC. So you will not be able to turn on this device as it is currently configured. Took me a week to figure this out with responses to my inquiries about whether this device had actually been tested. I assume that it wasn't.

Rudy | Feb. 6, 2017

Powerful, tiny, handy and good service. I love it.

For NifteeSupply - 80W DC Smart Power Supply

I always carry it with me with in my laptopbag, it's incredible practical and easy to use and I don't use all the possibilities yet, I like the fact that I can use my laptops standard powersupply and don't need to carry another one.
Also the extra features like the separate voltmeter and the USB power are incredibly handy.
Also I like it's firmware can be upgraded and I have a tip for the creator that is easy to implement:
Please put a safety feature to lock the voltage level with the long press of the button then blinking the blue led to show the lock is active. Because when connected a wrong press on the touchscreen can easily happen.
Also a big thanks to the creator for his communication and sending it to the Philippines after emailing.

Rudy | Feb. 6, 2017

Powerful, tiny, handy and good service. I love it.

For NifteeSupply - 80W DC Smart Power Supply

Response from NifteeCircuits | Feb. 7, 2017

Thank you for your review Rudy!

I'm pleased to read things are going well. Have you tried the cloud access or pc control software for the NifteeSupply?

The ability to limit the output voltage and/or place a lock on the output will be available as an update late February, along with other new added features and bug fixes. Be sure to periodically check back as new videos will be posted demonstrating how to configure and use the advanced features of the NifteeSupply.

Feel free to reach me at support@nifteecircuits.com with any questions or suggestions - feedback is always appreciated!

Josh | May 24, 2016

nice break out board

For 4MB SPI Flash Memory Board

Nifteecircuits produces some great things; this is one of them. Fast delivery & board works as indicated. Nice & easy memory to use.

Michael | May 2, 2016

Worked perfectly!

For 3.5 MM Audio Jack - SJ-3524-SMT-TR

Bought this to fix a stereo from a Harley Davidson. The Aux port had broken away from the circuit board and was damaged. Ordered this one, heated the solder joints to remove it from the board, then solder it on the stereo. Worked great. Shipping was fast.

Josh | April 16, 2016

outstanding mic

For MEMS Microphone Breakout - SPU0414HR5H-SB

I've seen a few mem's mics and they all seem to offer similar performance. Most others are (imho) way overpriced. N.C.'s version is nice & compact with well labeled pins. So far, the mic seems to work great. Well worth it.

Josh | April 16, 2016

Nice size

For SOT23-6 t DIP Adaptor [Qty 3]

This is a nice size adapter. easy to work with & good spacing on the pins. All N.C.'s stuff are great. Can't go wrong.

Alan | March 26, 2016

Everything worked as expected

For 3.5 MM TRRS Audio Jack - SJ-43516-SMT-TR

It was great to receive the shipping in less than 2 weeks, it was fast!

I recommend this guy, you can buy from him with no problem!

BR,

Alan

Alan | March 26, 2016

Good product

For 4MB SPI Flash Memory Board

Everything arrived too fast, I got surprised because normally shippings to Brazil delay too much.

Definitely I will buy more items from this guy again!

BR,

Alan

Alan | March 26, 2016

All right!

For TCS34725 Color Digital Sensor Breakout Board

I received the product in less than 2 weeks.

It was amazing because normally shippings to Brazil delay too much!

I should by more items from this same developer again!

BR,

Alan

Josh | Feb. 23, 2016

neat little board

For 3.3V Boost Regulator Board - MCP1640T

Works like a charm & is a nice footprint. Good communication & support. Not sure what else to say...

Josh | Feb. 23, 2016

works good & nice size

For Digital ALS and Proximity Module Board - TMD2772

Works as expected & is a nice size. Nifteecircuits does a good job on little boards. Would be good to have an arduino example; so it's not for a beginner.