Tindie

Avatar

pico

118 orders since Nov 12, 2013

5 Reviews

Brisbane, Australia

Ships from Australia.

Teensy 3/LC Proto board, Arduino Shield, nRF24L01+

Teensy 3/LC Proto board, Arduino Shield, nRF24L01+

pico

$5.50

RFX nRF24L01+ Proto Shield (Kit)

RFX nRF24L01+ Proto Shield (Kit)

pico

$4.95

Nano 3 board w/ shield breakout, proto, nRF24L01+

Nano 3 board w/ shield breakout, proto, nRF24L01+

pico

$6.50

RFX 328p dev/dep board w/ nRF24L01+ headers (Kit)

RFX 328p dev/dep board w/ nRF24L01+ headers (Kit)

pico

$4.95

Shipping Policies

No country selected, please select your country to see shipping options.

Rates to

Reviews

Review Breakdown

5
3 4
1 3
0 2
0 1
0

Average Ratings

Product: (5.00)

Documentation: (4.75)

Shipping: (5.00)

Communication: (5.00)

Richard | March 16, 2017

Good board

For Teensy 3/LC Proto board, Arduino Shield, nRF24L01+

An excellent product. Sadly the documentation was limited to a build-it guide, which was very clear.

The developer's wiki had sufficient information to determine the pinouts and match them to the (almost) standard Uno layout.

The limited contact I had with the supplier to improve the documentation, suggested that communication on any issues would be good.

All in all, I'd buy another one if I needed Teensy to Uno conversion again.

Josh | May 24, 2016

Great when teensy is too small.

For Teensy 3/LC Proto board, Arduino Shield, nRF24L01+

Perfect when you're doing initial prototyping, or if doing a project with teensy and you don't need that teensy form factor.
Board works as advertised, although I've only used it with 1 of its configurations.
The assembly can be a bit tricky - time and patience is your friend. If you have questions, support is there to help you thru.

Paul | Nov. 14, 2014

Product worked like a charm.

For RFX nRF24L01+ Proto Shield (Kit)

No issues to speak off. I ordered 2 more.

Robert | Oct. 13, 2014

A board that does Exactly what it claims to do...

For Teensy 3/LC Proto board, Arduino Shield, nRF24L01+

The RFX Tteensy 3.X Dev board is exactly what I wanted to do. It makes all of the Teensy pins available for use and includes a 3.3V linear low dropout voltage regulator.
The board is well designed and exactly matches all the pins of my Teensy 3.1.. Soldering the 14 pin SMD header is well explained however it does require some soldering skills and the need to very exact in cutting the female header strips to the exact size required and an ability to pay close attention to detail...
I initially bought two and I intend to buy one more...
Great Value for not so much money... An uncommon thing in these days.
Thank You for a nice product.

Docedison

Mats | Dec. 23, 2013

Nice nRF24L01 development board

For RFX 328p dev/dep board w/ nRF24L01+ headers (Kit)

Just what I need for my nRF24L01 testing. And I like the silk screen print of the nRF24 labels instead of the "Arduino labels" since they are hardwired to the nRF24.

The things I would like to change:
- LDO in SOT23 case
- The schematic isn't included in the documentation kit.

Merry Christmas
Mats
Avatar
Response from pico | Dec. 23, 2013
Thanks Mats for your review! Fair criticism about the schematic -- I've now added a full schematic at the end of the "long" assembly instructions. Constructive feedback like this leads to better kits all around, so thanks for bringing that to my attention.

Also, as for the SOT package for the voltage regulator, as you've discovered you can straightforwardly mount a LD1117 in a SOT-223 package in place of the TO-220 package, if so desired. The SOT-223 pins line up neatly on the TO-220 pads.

While I deliberately chose to use all through-hole parts to make this kit maximally accessible to the less experienced with soldering, it's good to know there is flexibility in this regard when it comes to more experienced builders like yourself.

And Merry Christmas to you too! :-) I hope your nRF24 projects work out well.
Cookies help us deliver our services. By using our services, you agree to our use of cookies. Learn more.