Pawel | May 21, 2020

Kis | Feb. 14, 2020

Freddy | Oct. 11, 2019

Ronald | June 24, 2019

Amiga 600 Fastram

For OpenAmiga600FastRamExpansion

Works fine. I used RAM Chips like TMS 418160DZ and also NEC4218160-60, SEC KM 416C1200AJ-7.
Only the PLCC68 socket was not so good and i must degrate it.

Response from SukkoPera's Retro Works | June 24, 2019

Thanks for your review, Ronald. I'll add those chips to the compatibility list. I'm sorry the socket did not work your you, actually I find those are pretty good and grip to the CPU very tightly, provided that you don't plug/unplug them too many times. Did you file it a bit so that it doesn't get in the way of R102?

Ali | Jan. 30, 2019

A nice board that will do the job better than others.

For OpenAmigaDriveSwitcher

You can do this "Drive Switcher" yourself by using two (or three) stacked 40pin IC sockets and make the proper switching by wires on pin 13/14 and a 2-way, 6-pin switch. This is like "manual" switching.

This board offers a "chip" to do the switching, with either a jumper or a simple on/off switch (3 pin). It makes things interesting as you can, with proper circuitry, do the switching by reset (timer).

I like the board but the chip that came with the board was busted and it could be, probably, my fault! I used a better brand (DM74LS157N) to replace the existing one and everything went fine.

A. Kattan

Response from SukkoPera's Retro Works | Feb. 1, 2019

I'm sorry the IC I sent you didn't work, but I had tested it before shipping and it seemed to be working fine. I suspect it might have failed during soldering.

Anyway I am glad you finally got it working. Enjoy and thanks for your review!