BurgessWorld Custom Electronics

1,150 orders since Apr 14, 2017

Blenheim, SC, United States of America

Ships from United States of America.

Custom Work Available

View Store

Welcome to BurgessWorld Custom Electronics Tindie Store!

Overall Rating:

Review Breakdown

Average Ratings

Product: (4.78)

Documentation: (4.19)

Shipping: (4.74)

Communication: (4.67)

All Reviews

Don | Dec. 20, 2023

Well designed and useful

For Teensy 4.0 SDIO + USB-HOST Board

Neat little board for the T4 and quick to build. The compact format is well suited to more discrete installations.

Matthew | June 7, 2022

Great board

For Arduino-Teensy4.1 - Teensy 4.1 Expansion Board

Great arduino-format breakout board for teensy 4.1- no issues so far. Documentation could be improved though, ideally with an arduino-style pinout diagram.

Greg | Nov. 29, 2021

Awesome Board!!!

For Wireless Multi-Sensor Board for IoT/Smart-Home

It was fast delivery and the board is built very well. It allows for a lot of expansion and configurations. My only con would be to have some documentation with the board but with great communication with the seller I was able to figure most things out.

Douglas | Jan. 12, 2021

Nice breakout.

For Arduino-Teensy4 - Teensy 4.0 Expansion Board

Solidly make product. It would be better if it had an ESP32 instead of the older ES8266. It still works well though.

Noah | Dec. 28, 2020

Works perfectly

For USBasp AVRISP Programmer 6-pin with cable

Arrived pretty quick, no tracking though. Product works well and had no problems using it. Easy enough to figure out how to use it.

Cam L | Dec. 11, 2020

Excellent Expansion Board for my Teensy 4 Project

For Arduino-Teensy4 - Teensy 4.0 Expansion Board

I was recently exposed to the Burgess World Teensy product lines and was impressed with the direction the product was headed. When I saw this expansion board I knew it was a must for my project, but when I went to order it I learned that it would not be available for awhile due to some updates and upgrades to Burgess World Custom Electronics environment. Patience is not one of my best virtues, but I put my name on the waiting list and was very pleased when the notice came that the product was ready for purchase. It was just a week or two later and I was hacking this project out. It was the best purchase decision for my situation.
I am working a crypto-puzzle for my children who love puzzles and mysteries and the Teensy 4 was my controller of choice due to the speed and number of cycles that the processor could handle. It has been nice to have a standard form factor for many of my Arduino-Type shields that will be a part of this project. This expansion board has made accessing all the IO of the Teensy 4 available in an easy to use form factor. I am particularly interested in the SPI ports with the numerous sensors that I will be using for this self-contained puzzle. Form factor for this is very nice and is going to be a nice fit in the small form factor this puzzle.

Thanks Burgess World
Opus32

Charley | July 13, 2020

The Teensy 4 expansion turns it into a Teensy 4.1

For Arduino-Teensy4 - Teensy 4.0 Expansion Board

I am in the learning mode so I saw this board as an opportunity to learn Teensy 4.0 AND Blue Tooth, and wireless modes. This board provides all this and more!
I installed the T4 -
I was missing a couple of parts which arrived promptly when I sent an email.
I did find that with the Teensy mounted in the socket and the heat-sink installed the expansion board's pins could not reach the plugs on the board. An easy fix: I put the plugs that were normally used on an Arduino expansion board - plugs that would poke through the expansion board to make the pin-field. I used those on the T4 expansion board but the pins only went through the board enough to solder. This left the plug a half-inch above the board and easy to plug into.
I would highly recommend this board!

Charley

Eric | Sept. 22, 2019

A good product

For 12-Bit/8-Channel ADC HAT for Raspberry Pi v3.0

A good product.
To give access to the connectors and to allow good contacts with the GPIO, an extended connector of the GPIO is provided with this card and is needed to raise the card.
The performances are the same than as the MCP3208 alone. It can be used with all the typical drivers for MCP3xxx CAN or SPI modules without any changes.
May be one remark : If I could propose some improvements for a future version, may be a different implantation of the connectors, some screws and braces provided with the card to support it and may be a plugged connector instead of the screw terminal, but these are only suggestions. Anyway the product works very well as it is and we can still order the previous version of the card unassembled...
In addition, I notice a very good follow-up from the provider and a good service from Tindie with a quick delivery.
Thanks to develop and to sell this kind of useful products.

Rick | July 1, 2019

Great board!

For 12-Bit/8-Channel ADC HAT for Raspberry Pi

This is a basic, well thought out board that worked the first time. Good job in filling a big need.

Robert | April 10, 2019

Great customer Service and communication

For ESP8266 Programmer with USB-Serial Adapter

I was able to program some old esp-01 board I had laying around, and after a few bumps, was able to program my ESP-12F board tonight.

Great communication and support from Chris. I wouldn't hesitate to buy from him again.

Robert

Andrey | Nov. 29, 2018

Professional quality board

For 10-Bit ADC/VMS Board (HAT) for Raspberry Pi (v2.1)

Professional quality assembly. No issues placing on Raspi and immediately got it working. Quick order shipment, firm packaging.

Hemanth | June 30, 2017

Good board to use for Teensy 3.2

For ARDUINO-TEENSY v4.2 with WIFI+BLUETOOTH+NRF24L01

I find that this board does all that the description says.
Two item that can be improved:
1. The 100 mil pitch holes for soldering the pin-row header
need to have a larger annular ring to help increase solder-ability.
2. Ground and (5V) Power plane connectors need thermal relief
internal pads to help with soldering.

Thanks to this board, I can quickly add different peripheral controls from Teensy 3.x

Highly recommended.

Greg | June 5, 2017

Developer was very responsive to questions

For Battery-Powered Wifi Temp/Humidity Sensor (v1.21B)

I should have bought the USB/TTL cable. If you don't already have one you will need this to connect to the Arduino.

Chris was very helpful in responding to my questions about connecting to the board and pointed me at his GitHub page.

https://github.com/cburgess5294/BurgessWorld

I've created a fork of the project that will post the DHT values (temperature/humidity) and the battery level to an MQTT broker. The fork is at https://github.com/rgstephens/BurgessWorldMQTT