Tindie

Avatar

DHPyeLtd

489 orders since Jul 08, 2020

Newcastle upon Tyne, Tyne and Wear, United Kingdom

Ships from United Kingdom.

View Store

Overall Rating:

Review Breakdown

5
59 4
25 3
2 2
0 1
0

View All Reviews

Average Ratings

Product: (4.91)

Documentation: (4.81)

Shipping: (4.81)

Communication: (4.77)

All Reviews

Gerald | Oct. 25, 2021

Good piece of repair kit for restoring a Pure Evoke Flow

For Display replacement kit for Pure Evoke Flow and F4

I followed the instructions, replaced the display, added the circuit board and now have a useful Pure Evoke Flow radio.

My thanks to the designers and manufacturers.

Martin | June 27, 2021

Really good- highly recommended

For Display replacement kit for Pure Evoke Flow and F4

The display on my radio failed - I could just about read it in a darkened room but basically that was useless. The new display is great and has given the radio a new lease of life. The instructions are very good. The fitting is just a little tricky - probably not ideal for a complete novice - but it wasn't difficult. If your display has failed I'd certainly recommend this.

Steve | June 19, 2021

Works fine and saving the planet!

For LCD Display kit for Pure Evoke Flow and F4

After being told by Pure that my (already replaced due to screen) Evoke was not economically repairable, I was expecting that this unit would have to go to the dump and I'd have to buy a new radio. The kit is brilliantly engineered. Instructions were spot on - even for the tricky bits. I had to reassemble twice - first time because I had accidentally pulled one of the ribbon cables out on the main unit - just fed back in again OK. Second time, because backlight was not lit - this was from the silver cable not being snuggly fitted - refitting it worked a treat. Thanks for this great kit - I am almost tempted to buy more Evoke radios and fix them up, more to save the planet than anything else :-)

Hugh | June 6, 2021

Replacement screen for Evoke Pure Flow

For LCD Display kit for Pure Evoke Flow and F4

Brilliant conversion to repair what would have been binned!
Fiddly to do but the instructions guide you through the job.
Putting the new screen in place is a test but a non specialist can do the whole thing without fear.

Pete | June 6, 2021

DAB radio working again

For LCD Display kit for Pure Evoke Flow and F4

The installation went well and the display works well. The viewing angle is a littlelimited, but at least the radio works again now.
My radio was different inside to the one in the puctures, but it still worked OK. For a moment, when I switched it on, I though the backlight wasn'r working, but it was just that my rechargeable battery pack was taking a while to come up to voltage.

Maryse | April 2, 2021

So happy with this product

For Display replacement kit for Pure Evoke Flow and F4

I was unable to use my radio because it was impossible to see something on the little screen. No more indications, all was dark. I installed the kit, I was under stress, but it was in fact easy, following the documentation. My radio is again usable and that makes me happy ! (France)

Paul | March 23, 2021

Good product and kept me informed of when next available

For Display replacement kit for Pure Evoke Flow and F4

Overall the product is good and is perfect replacement. One issue - instructions may need to be updated to include additional wire to the radio's handle (on some models) - this is not shown or mentioned in the guidance.

Timothy | March 4, 2021

Replacing dead screens in Pure Flow Radios

For LCD Display kit for Pure Evoke Flow and F4

I had 2 Pure Flow radios that the screens had died in. One was bought to celebrate 25 years working for the same company and one was inherited from my father. Both screens gradually faded with time and the two radios were left on the same radio station. This rendered both radios almost useless. Having hunted on the internet for a solution I eventually came across the 'Blue Screen' kits which appeared to get away from the problem of replacing the screen only to find it eventually fades away again. Having waited for them to be available again I ordered two screens. The instructions that came with the screens guided you through the dismantling procedure, installation of the replacement screen and reassembly of the radio well. The only comment I have is that it was easier to connect the long ribbon cable to the connector on the new screen board before screwing the board in position. But that may be due to the size of my hands. All you need to replace the screens is a set of screwdrivers. Having connected everything back together both radios worked first time. I now have two fully working Pure Flow radios. I can only praise the quality of the kits and the way that they work. It may not be a yellow screen as the original but the blue screen looks good and automatically adjusts the screen brightness to the light levels.

Steven | March 4, 2021

Mr. S Cocking - UK

For LCD Display kit for Pure Evoke Flow and F4

Kit installed just as per instructions and worked just as promised.

Well worth the money. Highly recommended.

Harald | Jan. 24, 2021

Radio is like new

For LCD Display kit for Pure Evoke Flow and F4

The fitting of the display is a bit fiddly at points but really not difficult and extremely well documented. The thing works like a charm and it is like owning a brand new radio now.

Christophe | Dec. 29, 2020

Very good service for a product conform to description!

For Display replacement kit for Pure Evoke Flow and F4

After some problems with Royal Air Mail (posting outside UK, in Europe...), the display arrived and its installation went perfectly, following the good instructions available together with the display.

Martin | Dec. 28, 2020

This LCD screen saved my Evoke Flow radio from the scrapheap

For LCD Display kit for Pure Evoke Flow and F4

With the accompanying instructions the replacement of the screen took about 20 minutes and was not too difficult for someone with a reasonable level of technical ability. No specialist tools were required.

Alan | Dec. 23, 2020

Brilliant

For Display replacement kit for Pure Evoke Flow and F4

Slight hold up in Christmas Post (Royal Mail issue) but otherwise brilliant. Clear instructions so Radio is now usable.

Andy | Dec. 19, 2020

Brilliant!

For Display replacement kit for Pure Evoke Flow and F4

My Pure Evoke Flow was suffering, as so many do, with a barely readable faded display.
Did some research and found this replacement which was very easy to fit, in about 20 minutes, following the incredibly comprehensive instructions supplied.
Display is now back to 100% and I can actually see what I’m listening to again.
It was so much cheaper than throwing away the old radio. I’m sure that I’ve got a few more years of listening pleasure left now.
Great service throughout. Thoroughly recommended.

Stephen | Nov. 28, 2020

Simple to fit and brought the radio back to life. Excellent.

For LCD Display kit for Pure Evoke Flow and F4

I'm not much of a DIYer and electronics are a mystery to me but I can follow simple instructions and plug one thing into another. I managed this repair fine. It took me about 20 minutes. The price was reasonable to get a radio I like back in service.

Philip | Nov. 26, 2020

A quality item, delivered quickly and efficiently

For Display replacement kit for Pure Evoke Flow and F4

The display works well. Very bright and clear. My only criticism is that the brightness cannot be adjusted.

Philippe | Nov. 18, 2020

Great replacement display

For Display replacement kit for Pure Evoke Flow and F4

Well documented and easy to install. Even when setting dimming to lowest level display remains very bright though.

Laurent | Nov. 14, 2020

Rassuré, espère que l’écran fonctionnera plus longtemps

For LCD Display kit for Pure Evoke Flow and F4

Envoi rapide et conforme, pas de soucis.
J’ai suivi les instructions (http://www.davidmpye.com/files/LCDInstructions.pdf) en faisant un copier/coller sur GoogleTraduction, pas de soucis particulier en tâtonnant un peu avec la traduction pour les connecteurs qui se retirent finalement assez bien.. sans forcer vu la petite taille (un que l’on doit lever, un autre qu’il faut pousser si je me souviens bien, fait il y a 2 semaines..).
A certains moments pas beaucoup d’espace pour manœuvrer mais rien de rédhibitoire.
Compter 30/45mn en le faisant tranquillement.
Merci

Ann-Marie | Nov. 9, 2020

Great for Pure Evoke Flow radio

For Display replacement kit for Pure Evoke Flow and F4

Clear instructions supplied to replace display. Process a bit fiddly with removing the internal screws to the original display - easiest to use a slimmer full size screwdriver than jewellers size. Be careful when using the adhesive to position the display as it sticks fast. The display is yellower and brighter than the original but a small price to pay to have a usable radio again. Very pleased with the product and finished result.

Clive | Nov. 8, 2020

Great Work!

For Display replacement kit for Pure Evoke Flow and F4

My Pure Evoke Flow radio's display had become very dim. Thanks to David's work and product the radio is now fully resurrected! Easy to fit (20mins) using the online instructions detailed with the delivery. Quick postage to Australia too.

Brian | Nov. 1, 2020

Great buy

For LCD Display kit for Pure Evoke Flow and F4

Had spent far too much on a “genuine” display which lasted about six weeks and I couldn’t find another anywhere. The Pure Evoke Flow was for the bin when I came across this LCD version. Not the most elegant replacement but it works, was easy to fit, instructions left a little to guesswork but I managed that and the Evoke lives again. No support anywhere from Pure themselves.

Herbert | Oct. 16, 2020

alles bestens !!! thank you so mutch !!!

For Display replacement kit for Pure Evoke Flow and F4

Alles bestens !!! thank you so mutch !!
_________________________________________________________________________________________________

Jan | Sept. 25, 2020

Quick delivery, easy install, satisfied customer.

For Display replacement kit for Pure Evoke Flow and F4

Quick delivery ( 2 or 3 working days or something like that) and easy install. My Pure Radio is like new again. I 'm very satisfied.

Kaj | Sept. 1, 2020

#210827 Received my purchase Friday 4th of Sep 2020

For Display replacement kit for Pure Evoke Flow and F4

Today (Sunday) My MPure Evoke is up running again using the replacement kit by David Pye. All works perfect. Excellent and clear instructions. Thank you David for your clever invention.
Kind Regards Kaj Preben Christensen, Denmark

Anna | Aug. 13, 2020

Worked perfectly

For Display replacement kit for Pure Evoke Flow and F4

Instuctions on the website were clear and easy to follow, so no difficulty in replacing the screen. Replacement screen is working perfectly so has extended the life of the radio
Cookies help us deliver our services. By using our services, you agree to our use of cookies. Learn more.