Tindie

Avatar

Electrolama

6,752 orders since May 11, 2020

London, London, United Kingdom

Ships from United Kingdom.

View Store

⚡ We've moved! Please visit the new Electrolama shop at https://shop.electrolama.com

Overall Rating:

Review Breakdown

5
222 4
86 3
10 2
6 1
3

View All Reviews

Average Ratings

Product: (4.86)

Documentation: (4.69)

Shipping: (4.72)

Communication: (4.75)

All Reviews

Dmitriy | Oct. 1, 2021

Total control over ZigBee devices

For zzh! CC2652R Multiprotocol RF Stick

With Electrolama CC2652R I can control all my ZigBee devices and mix them together as I want. IKEA switches that command Sonoff WiFi relay - easy! Just add Node-red or Home assistant and make whatever scenario you want

Stephen | Sept. 23, 2021

Works perfectly

For zzh! CC2652R Multiprotocol RF Stick

I have the stick configured with zigbee2mqtt running under Ubuntu, it is far more responsive than the CC2538 + CC2592 I had previously.

The website however is not well maintained, the links to the Windows drivers for flashing on windows dont work, and the stick is not automatically detected
The link to the firmware is out of date, although I managed to find the right one on Github
The linked python script for flashing works perfectly.

You need a better option for shipping than Royal Mail to Australia.

Jeremy | Aug. 17, 2021

Great little stick

For zzh! CC2652R Multiprotocol RF Stick

I dig this little guy. It painlessly integrates with Zigbee Home Automation with HomeAssistant - after flashing it with the correct firmware, that is. Don’t let the flashing LED fool you - read the FAQ and make sure you flash the stick before trying to use it.

Zigbee integration with my home has been great!

Martin | July 21, 2021

Excellent product

For zzh! CC2652R Multiprotocol RF Stick

Bought this despite never having used Python previously. I followed the instructions very carefully – checking and double checking as I proceeded. At the end, after about 15 minutes, I achieved a working Zigbee communicator on my Home Assistant, which I am still setting up. It communicates with all my rad vales, even the one I put in the refrigerator as a test!

Coen | July 10, 2021

Set-and-forget Zigbee stick

For zzh! CC2652R Multiprotocol RF Stick

The ZZh is a robust solution for your Zigbee network. Literally the bedrock of my HomeAssistant smarthome system, enabling the Hue lights, Osram smart plugs, Aqara sensors and a couple of dimmers. I run it with Zigbee2MQTT which has proven to be flawless in its execution and keeps getting better with every update. Omar is a stand-up guy that I highly recommend buying from.

Danial | July 3, 2021

Great little stick

For zzh! CC2652R Multiprotocol RF Stick

Arrived much quicker than I thought, setting it up was straightforward but it does require some technical knowledge to get it up and running. After setup, its been working with Home Assistant with no issues! Would totally recommend!

Simon | June 25, 2021

Fantastic Zigbee Co-ordinator

For zzh! CC2652R Multiprotocol RF Stick

After my CC2531 died out of the blue I wanted something better to replace it. Filling the recommendation from Z2M I ended up looking at the ZZH and I'm glad I did. My network is far faster than before and the signal strength is a lot stronger. Really pleased.

Only criticism I have is that the dispatch could have been quicker, but it wasn't overly excessive.

Mikael | June 11, 2021

Great product and documentation

For zzh! CC2652R Multiprotocol RF Stick

Nothing to complain about, just praise. Everything was crystal clear. Documentation flawless. Very impressed! Great product, very happy with the function. I deeply recommend the whole package.

Dominik | June 8, 2021

Works reliably with Zigbee2Mqtt, nice case.

For zzh! CC2652R Multiprotocol RF Stick

Works reliably with Zigbee2Mqtt, and a nice tight-fit case for it. With a previos CC2531 based adapter I had pinging issues in a Zigbee network of about 10-15 devices, now those are gone and communication works reliably. My device's USB A connector had a little dent after the shipping as it seemds to have gotten squeezed in transport - no big deal, but some sturdier packaging my help. Thanks for making this great device!

Hever | May 22, 2021

Very recommended

For zzh! CC2652R Multiprotocol RF Stick

I bought zzh! after CC2531 and Slaesh's because zzh out of stock in the first time.

zzh definitely better then Slaesh's and CC2531.

if you are missing, sign up for an email that will return to stock

Jakob | May 21, 2021

Works as expected

For zzh! CC2652R Multiprotocol RF Stick

It works just as expected - the setup is a bit tedious, but its well documented and works fine.
If you use a RPI4 or similar, I would highly suggest you buy a usb-extension cable as well. Without it, I had a range of only a few meters - with it, it works even a few rooms over.
Shipping to austria took 2 weeks from order to delivery.

Edwin | May 21, 2021

Works like a charm

For zzh! CC2652R Multiprotocol RF Stick

My objective was to get rid of my xiaomi hub. And that worked like a charm. The stick arrived within two weeks from ordering from UK to NL. And using the electrolama quick start was easy enough to configure for HA use. Was up and running within 15 minutes end-to-end.

Ryan | May 20, 2021

Perfect

For zzh! CC2652R Multiprotocol RF Stick

I've been using the zzh! for over 2 months now and it has been flawless, just works and hasn't let me down yet.

Robert | May 14, 2021

Fantastic stick

For zzh! CC2652R Multiprotocol RF Stick

Prompt delivery, nicely packaged. The plastic moulding fits perfectly, it comes with an antenna. And best of all the stick works so much better than my previous CC2531. I've got about 40 devices hooked up all working perfectly. I've bought a few of these, one as coordinator and others as routers. Flashing was _fairly_ straight forward (instructions and scripts could be improved but wasn't a huge problem)

Nedelcu | April 20, 2021

Produc is ok

For zzh! CC2652R Multiprotocol RF Stick

Product seem ok from all points of view except one. I expected LQI of devices to be higher (this can be something related to my zigbee network not sure 100%) however I have to mention that ZHA network with Elelabs was more solid with the same settings I use now for Zigbee2MQTT. Don't get me wrong network works and all is ok except some devices relatively close to coordinator have very low LQI (usually under 20 LQI and sometimes under 10 LQI) that's the only complain. In rest product works great.

Edy | April 20, 2021

great!

For zzh! CC2652R Multiprotocol RF Stick

Shipment should be as option available (DHL or Fedex) because thru normal post service is very slow also in my country LOL

Adrien | April 15, 2021

Awesome tool!

For zzh! CC2652R Multiprotocol RF Stick

I bought the stick for some Zigbee tinkering and I couldn't be happier. The stability is perfect, the range is more than good, and I even got a little llama sticker with it :)

Paul | April 13, 2021

Excellent kit

For zzh! CC2652R Multiprotocol RF Stick

Bought as upgrade from cc2351, used with Home Assistant installed on a Pi4 and used with Zigbee2MQTT.

Pros:
- simple to flash
- much more stable on my system than the cc2531
- small size
- Responsive support from vendor.

Cons
- reconnecting ZigBee devices has been a challenge. Not sure if this is a zzh! issue, or may have been better with the ZHA integration in HA rather than Z2MQTT. Could also be a ZigBee protocol issue. My advice is to keep trying and you'll get there eventually. Seened to work more reliably after rebooting the pi after each device connected, but that might just be me.

- there's a LED on the board but is not used in normal operation. I expected it to show an "on" state so was a bit surprised it didn't.

- needs a free TI installer that requires registration. Small issue but it took longer than expected to sort this bit.

TL;dr: a define improvement on the CC2531. Easy to flash, and stable when running. Takes some time to re-pair devices. Would recommend as a step up or initial purchase for anyone using Home Assistant.

Laurent | April 13, 2021

Can not use on my config

For zzh! CC2652R Multiprotocol RF Stick

Hi,

Product Okay, working well when working alone (no other USB stick).

In my case, on my domotic box I get, RFL link, Zwave, mysensors, and zigbee.

Zigbee is okay with cc2531 But not with my zzh!.

Port unusable , symlink goes wrong because ATTRS{idVendor}, ATTRS{idProduct} is already the same than my RFlink.

Håkan | April 13, 2021

Works really well

For zzh! CC2652R Multiprotocol RF Stick

Zzh! + zigbee2mqtt and some IKEA and aqara units.
A bit difficult to pair IKEA units. This seem to be a zigbee2mqtt problem.
Works very well otherwise !

Delivery to Sweden was rather slow (~ a month). This is due to our privatized and dysfunctional postal service (postnord) and the customs office in Sweden.

Adrian | March 25, 2021

Wonderful product!

For zzh! CC2652R Multiprotocol RF Stick

Totally wasn't disappointed. I bought it with the intention to use it with Zigbee2MQTT and specifically chose this one out of the two recommended ones because I like the "style". Who can't trust a Lama?
Documentation is well; as a first-timer I needed some round trips but I already PR'd them on the documentation, so that's totally fine.

Paavo | March 17, 2021

Works like a charm!

For zzh! CC2652R Multiprotocol RF Stick

Flashing the dongle according to the instructions was super easy and it works without a hitch with Zigbee2MQTT. I'm super happy with it. The order was processed without delay and the seller even sent a pic-as-proof of the drop to Royal Mail.

Dennis | Feb. 26, 2021

Great working Zigbee coordinator

For zzh! CC2652R Multiprotocol RF Stick

Used a CC2531 and had a lot of trouble with instability. Now running this zzh! everything runs pretty darn smooth.

The zzh! came nicely packed, including a case. No need to use any firmware flashing equipment, installation is straight forward and well documented. Had to do a little bit of reconfiguration in Zigbee2MQTT, reconnect my devices, and never had to look at it since. Great job!

Arnaud | Feb. 26, 2021

Top

For zzh! CC2652R Multiprotocol RF Stick

Work perfectly with zigbee2mqtt. I had some trouble to flash the device because I didn't read well the documentation.

Javier | Feb. 17, 2021

zzh! CC2652R Multiprotocol RF Stick

For zzh! CC2652R Multiprotocol RF Stick

Toda rápido y todo perfecto gran embalaje y rápido envio

Muchas gracias

El stick funciona perfectamente con home assitant y zigbeemqtt

Gabor | Feb. 15, 2021

Perfect product, perfect experience

For zzh! CC2652R Multiprotocol RF Stick

Bought it as a replacement of a ConBee 2. The zzh! is a lot better than the nightmare with the bloated deCONZ bullshit.
The documentation is pretty straightforward and the "customer experience" (shipping, handling, everything) was absolutely perfect.

Joakim | Feb. 13, 2021

Good value! Works great!

For zzh! CC2652R Multiprotocol RF Stick

I have been using zzh! from around august 2020. I could not be more pleased with this device. Super stable and good rf coverage.
I was one of the unlucky buyers in june 2020 who received a unit from a broken batch, but when it was replaced with a new device a while later all was as good as expected.
Excellent communcation from seller and nice documentation on flashing etc.
I plan on buing one more zzh! for my parents as soon as the store opens up again.

Andreas | Feb. 13, 2021

Great product

For zzh! CC2652R Multiprotocol RF Stick

Works great as a coordinator for Zigbee2MQTT, big improvement over the old CC2531 with 40-50 devices on the network. Stick look&feel is very good and professional. Shipping was fast.

Kevin | Feb. 1, 2021

Great

For zzh! CC2652R Multiprotocol RF Stick

Even the product as the seller are great! Thank you (again) so much for all your help! The seller is really kind and searching for the best way to make their client happy! The product works really great!

Tim | Jan. 24, 2021

So far so good! Zigbee on Home Assistant in Docker

For zzh! CC2652R Multiprotocol RF Stick

I knew it was small, but didn't quite realise how small until it arrived... it's tiny!

Works perfectly so far. Very impressed.

Am using it for Zigbee in Home Assistant.

1. Plug it into the Raspberry Pi 4 via a USB extension cable as advised, due to interference from the Pi's onboard WiFi
2. Install the Zigbee firmware via commandline on the Pi
3. Install Zigbee2MQTT docker container
4. Install Home Assistant MQTT addon and integration
4. Pair an IoT sensor/device and it magically just appears in Home Assistant

I have zero experience with Zigbee or Zigbee2MQTT and very little experience with Home Assistant but had the whole thing up and running in a couple of hours and now have lights on motion sensors plus a few other types of sensors I purchased recently.

Top job on the ZZH! Thanks.

John | Jan. 23, 2021

Replacement for CC2531

For zzh! CC2652R Multiprotocol RF Stick

The zzh! purchase is to replace the CC2531 and with the excellent instructions and a little re-pairing, I have connections that never worked before. Certainly worth the change. Thanks

Ismo | Jan. 21, 2021

Easy to use product

For zzh! CC2652R Multiprotocol RF Stick

I got this product and it took me only 15min to get it in use. Documentations are very good and specific.

Pepijn | Jan. 20, 2021

Using this as a zigbee USB stick voor zigbee2mqtt

For zzh! CC2652R Multiprotocol RF Stick

I received the product in the expected time and it was packaged well.
I'm using the stick as an upgrade to the cc2531 stick. The zigbee communication is a lot more stable now.
It is very easy to install the right firmware, if you are used to playing around with this kind of stuff 😉

John | Jan. 20, 2021

Easy to install Zigbee-stick

For zzh! CC2652R Multiprotocol RF Stick

Easy to install Zigbee-stick for home assistant. Works fine! Shipping was quick. Product was packed well.
Documentation took a bit of reading for a noob :)
Page 1 of 3
Cookies help us deliver our services. By using our services, you agree to our use of cookies. Learn more.