This is a pretty stripped down USB to CAN interface. The FW as shipped supports only a serial emulator interface to the CAN bus. At 115200(?) kbaud, this can lead to message loss on a 250KB bus.

The vendor was super helpful and was willing to discuss modification for a larger order. Although our target application will likely use a completely different approach, the vendor very much opened the door for an alternative.

Response from ucandevices | Nov. 28, 2019

Hi, thanks for review.

As for serial emulator interface baudrate only limit is form usb high speed that is about 480Mbit, value that You set in serial terminal (for example 115200) has no effect on device. Device if tested with fully loaded 1Mbit CAN bus at has reception rate nearly 100%.

If You had some issues with high receiving hight speed CAN data please contact me.

Also if You are not satisfied with SLCAN software for UCCB (that one with VirtualCOM port, You can always try second software with driver based on GS_USB (works on linux only) but it has better support for SocketCAN and CAN-utils.

Marius | July 30, 2019

ver satisfacted

For USB LIN Converter

The product is well has no proablems ,but is not compatible with win 10 ,so in an Wm machine is working well.

Response from ucandevices | July 30, 2019

If You have problems with win 10 then write to ucandevices@mail.com because i'm working with this device on Win10 PC all the time.

Rb-Informatique | July 9, 2018

Very good product

For CAN USB converter (UCCB)

Very good solution.
Shipping enough fast.
Work well on Ubuntu 14.04 and 16.04
Thanks a lot !!

Michael | Feb. 28, 2018

Wonderful

For CAN USB converter (UCCB)

This is a great product. My use of this device required that the CAN 2.0B data stream originate from a BASH shell, so the ucanviewer Java application was not an option for me. For me this device had issues operating under Ubuntu 16.04, however it ran very well under Raspbian executing on a Raspbery Pi. I believe that this device will operate very well under other Linux OS's. I used can-utils/SocketCAN/candump. Try using ucanviewer, directly from the shell, or can-utils/SocketCAN... I am sure that you will enjoy using this product. The construction is excellent, the support is excellent and the price is great! The architect/designer of this product is extremely knowledgeable and very friendly.

Tindie

ucandevices

Overall Rating:

Review Breakdown

Average Ratings

All Reviews

Glad I investigated this prototype.

Response from ucandevices | Nov. 28, 2019

ver satisfacted

Response from ucandevices | July 30, 2019

Very good product

Wonderful