Tindie

Avatar

Rabbit-Labs™

6,554 orders since Jan 30, 2023

Sayreville, NJ, United States of America

Custom Work Available

View Store

Overall Rating:

Review Breakdown

5
154 4
18 3
4 2
0 1
0

Average Ratings

Product: (4.94)

Documentation: (4.81)

Shipping: (4.93)

Communication: (4.94)

All Reviews

Mike | June 14, 2023

Awesome

For Flipper Zero - IR Blaster by Rabbit-Labs™

Too cool. Works better than original remotes. The death star is icing on the cake. And packaging was awesome too. Made in America sticker. I love that touch. Will be buying more rabbit products. Awesome job! Highly recommended!

Md | June 13, 2023

Not that bad, not that good either

For Flipper Zero - IR Blaster by Rabbit-Labs™

Parcel came beat up like trash but so far the item works. Specially chose Fedex as a carrier but regretted doing so just for purpose of speed wise. Tested, it works like it should but doesn't work across rooms that is covered by a wall so in theory and practical, you still need to point the IR to the device you trying to control. In terms of range, it was a good buy. Thank you Rabbit!

SideNote: It works with RougueMaster firmware now that it has 5v and sending signal to external device in IR menu
Avatar
Response from Rabbit-Labs™ | June 13, 2023
Sorry to hear your blaster packaging arrived damaged / beat up, Especially by FedEx as I've had really good luck with them over USPS lately. In terms of performance, you should see much improved range / reflection off surfaces, but the blaster despite being more powerful than the built-in emitter, cannot break the laws of physics :^)

Please send me a message and I can see about troubleshooting and/or replacing the blaster if needed.

Also, there was a known bug in RogueMaster Firmware that prevented the blaster from working properly. I have been told this bug has been fixed in the latest firmware build and advise running the latest build if possible.

Ethan | June 10, 2023

Solid product.

For Flipper Zero - IR Blaster by Rabbit-Labs™

Great for increasing the infrared capabilities of the flipper at a good price. I appreciated that the seller provides resources for a printable case and links to a lens and fasteners to make the design look clean.

Chris | June 9, 2023

Amazing product like everything else sold here

For Flipper Zero -5v CC1101 HotSwap MB By Rabbit-Labs™

I ordered this board a little over a month after getting the other CC1101 board from Rabbit'labs to have something smaller and easier to carry around. I am just as happy with this board as my previous one. Between the quality of the products, the fast shipping and the communication from the seller I can't recommend products from rabbit labs enough

Chris | June 9, 2023

Fantastic product

For Flipper Zero-CC1101 Expansion Board - Rabbit-Labs™

Board works perfectly. The range on my flipper is drastically increased with it. The board is very well made and designed so it will work flawlessly without any issues. Shipping was super quick and the seller is quick to respond to any questions. It is definitely worth purchasing any boards Rabbit-labs. I've recommended him to other people and will be ordering more myself.

Mario | June 8, 2023

Absolutely great to deal with!

For Individual Antennas & CC1101 Modules

Sorry for this late review. I had ordered a Genuine EBYTE CC1101 Module with Antenna for my Flipper Zero back in March. Communication and help from TehRabbitt was amazing! He responded really fast to my questions and even helped me with an issue I had with an order I had made from CyberBros. I got confused with a product I ordered and thought I had purchased from him but it wasnt. He was very helpful with connecting me with CyberBro's to get that issue resolved with my order. TehRabbitt is just all around great and has some great products. Shipping is quick and if you happen to have any issues, or questions, you will get a quick and helpful response to whatever it is. I would definitely do business with RabbitLabs again and would also recommend to others!

Filippo | June 8, 2023

top seller

For Flipper Zero Dr.B0rk NRF24 v2

Super super recommended seller!! super quality products are amazing! I will definitely buy again! The products are the best for the flipper zero

Filippo | June 8, 2023

top seller

For Flipper Zero - 5v NRF24 MiniBoard by Rabbit-Labs™

Super super recommended seller!! super quality products are amazing! I will definitely buy again! The products are the best for the flipper zero

Devon | May 29, 2023

Great Product and Outstanding Customer Service

For Flipper Zero - IR Blaster by Rabbit-Labs™

I'm extremely happy with Rabbit Labs' IR Blaster. Despite a shipping issue, their excellent customer service quickly resolved the problem. The product itself is top-notch, showcasing Rabbit Labs' expertise and dedication to quality. Highly recommended!

Thomas | May 27, 2023

Great service

For Flipper Zero Dr.B0rk NRF24 v2

Just got the NRF24 V2 board in, and all I can say is what an upgrade it is to my big bulky home built NRF24 board. Its slimline design rides so much better on my flipper and just makes the overall look so much slicker. Looking forward to more sick designs from Dr.B0rk and Ravbit labs.

Thomas | May 27, 2023

BEST SERVICE EVER

For Flipper Zero-CC1101 Expansion Board - Rabbit-Labs™

Shipped super fast a packaged with the greatest intentions of it reaching its destination unharmed. It boost my signal to the moon! Plus it looks the coolest! Everyone ask where I got it an I always recommend RABBIT LABS(the rabbit) is the best for anything flipper related.

Thomas | May 27, 2023

Best service

For Flipper Zero Protoboard with LEDs by Rabbit-Labs™

The best service anyone can ask for! Showed up fast and I damaged. Perfect packaging everything individually bubble wrapped. And even threw in an extra surprise.

Matt | May 25, 2023

Works great!

For Flipper Zero - IR Blaster by Rabbit-Labs™

It works great, but as of the time of this writing, it doesn't seem to work correctly with the RogueMaster CFW. I'll let them know that.

I thought it was broken at first, but I did get it to work fine when I switched to the Unleashed CFW. Haven't tried it with Xtreme yet.

Regardless, it does what it says it does, and rather well!

Thanks for all the hard work that went into this!!

Jmfl | May 23, 2023

FLIPPREME is dope

For FLIPPREME - ONE TIME LIMITED EDITION - IR Blaster

This thing is sick, sweet design and love the quality of anything that comes out of RL! Glad i got one of these bad boys!

Edwin | May 22, 2023

Really good quality

For Flipper Zero - IR Blaster by Rabbit-Labs™

Only thing I did not like was receiving it in in a package with nothing to protect it it was just the board i guess I just expected a little box with foam or something but at the end of the day it did not get damaged in the process so yea not complaining just giving my opinion keep it up I would love to make YouTube videos showing off your products I watch talking Sasquatch and just call me coco so pretty up to date with these awsome boards

Robert | May 20, 2023

Professional Quality

For Flipper Zero - IR Blaster by Rabbit-Labs™

Works great, and I am very impressed by the craftsmanship. The circuit board and soldering look professionally manufactured. The green power indicator LED is a bit bright for night time use, but this is easily corrected with a small piece of electrical tape. Thanks Rabbit!

Nick | May 19, 2023

Great device

For Flipper Zero - IR Blaster by Rabbit-Labs™

Nice powerful IR LEDs. It would be nice if the green LED could be disabled, it's incredibly bright. I ended up clipping mine.

Brian | May 16, 2023

Great Seller!

For Rabbit-Labs™ CC1101 900Mhz Module

Great seller with quick shipping. Ordered a 900mhz board, works great. Will definitely buy from him again.

Brian | May 16, 2023

FLIPPER ZERO IR Blaster

For Flipper Zero - IR Blaster by Rabbit-Labs™

I picked up a IR Blaster from him, which works great. It was shipped quickly and well packaged. Will buy from him again.

Chris | May 16, 2023

Amazing quality

For Flipper Zero - IR Blaster by Rabbit-Labs™

Awesome quality product. Definitely won't be the last time I purchase from rabbit-labs. Looking forward to what they put out in the future.

Jerry | May 15, 2023

IR Blaster works great!

For Flipper Zero - IR Blaster by Rabbit-Labs™

Update : On FlipperZero Unleashed 049, you no longer have to turn on Debug Mode to get the board to transmit externally. It's conveniently now in IR > GPIO Settings and you get set "Send Signal To: External" and Ext Module 5v To: On".

Received the IR Blaster and got it quickly to work with my FlipperZero by turning on the GPIO 5V and turning on Debug Mode to get IR to transmit external.

One warning is that the board was thoughtfully designed to overcome the use of the FlipperZero TPU Case but at least on mine I had to wiggle a little to ensure the IR Blaster headers were making full positive contact with the socket.

Verified that the IR Blaster was working with a camera on my phone, and was able to turn my TVs on and off at a fairly decent range.

Only minor complaint is that the green LED on the front is pretty bright; a small piece of black electrical tape helps with that but I wish there was a hard/soft switch to turn it off. I do understand why it’s there so that you know you turned on the 5V GPIO power and that it’s receiving power.

Thank you teh rabbit for making the IR Blaster!

Nick | May 8, 2023

Awsome

For Flipper Zero - IR Blaster by Rabbit-Labs™

I'm amazed at the work. Great product and fun to use definitely recommend having one if u can buy or any of thier products 100/100 and can't wait for the next project

Lambros | May 5, 2023

Affordable really good quality board

For Flipper Zero Protoboard by Rabbit-Labs™

Affordable really good quality board
Will buy again. Delivery to the uk super fast. Great seller. Great item

Lambros | May 5, 2023

Amazing item and great customer service

For Flipper Zero - IR Blaster by Rabbit-Labs™

So much fun to be had. Delivery to the UK was so fast and the customer service is brilliant. Will use them again

Robert | May 1, 2023

Great Product and Excellent Seller!

For Flipper Zero Dr.B0rk NRF24 v2

This was my first purchase and I ordered the Flipper Zero Dr.B0rk NRF24 v2. Seller was great to do business with very responsive! Plus the board looks great and worked as expected. Will definitely be making other purchases from this seller.

Nate | April 27, 2023

Fast communication, Honest.

For Flipper Zero Dr.B0rk NRF24 v2

The piece was damaged in transit, the seller had no problem replacing it. Fits better without the skin.

Paul | April 24, 2023

Most important flipper ad on for me personally

For Flipper Zero - IR Blaster by Rabbit-Labs™

This makes using the flipper as a universal remote much more realistic and powerfully deployed. I now dont have to get right up on the devices for transmission. Thank you as well for the case resources provided in the description.

Drew | April 24, 2023

FANTASTIC QUALITY AND PRODUCT

For Flipper Zero-CC1101 Expansion Board - Rabbit-Labs™

I just received my board today but I am already in love with it. The range is so much better and the quality of the solder joints and screen printing is absolutely fantastic. I wish I would've gotten one sooner. If you are on the fence about whether to get one or not, I'd absolutely recommend getting one.

I tried to give the product a rating of 10 but I guess 5 out of 5 will have to do 😅

Josh | April 18, 2023

Great product, one of the few who stand behind thier product

For Flipper Zero - IR Blaster by Rabbit-Labs™

If you make a great product, it’s easy to stand behind, that’s just what we have here with TehhRabbits boards. All of them are straight quality. I purchase everything he releases. Also he will answer any questions you may have even if they are stupid. If you have an issue he is a stand up guy and overnights replacements. Unreal how great his service is.

Chris | April 15, 2023

Amazing little board

For Flipper Zero - IR Blaster by Rabbit-Labs™

This board is awesome. I followed the instructions here and it works immediately. So easy to use and reaches very far. Recommend.

Aarash | April 11, 2023

Instructions

For Flipper Zero - IR Blaster by Rabbit-Labs™

Instructions for those of you going crazy thinking this thing doesn’t work:

1: go to settings>system>debug>ON
2: not when you go to infrared and sub-ghz you have extra options in the menu.

In the infrared menu you have the option to send the signal to pin 2. Which is what you will need to use your blaster.

Max | April 11, 2023

Works great!

For Flipper Zero - IR Blaster by Rabbit-Labs™

Works great! It took a bit to figure out how to use it but after I did it’s been excellent. I purchased after seeing the sellers Reddit post and decided to buy one. I tested on my tv and the ir can hit it even when pointing the exact opposite direction, the floor, the ceiling, different angles, ect. This will be great as the built in ir on the flipper is a bit iffy. Overall 4.9/5 as it took me a bit to figure out you had to enable the 5v pins and set the pin to a7 in debugging

Andrew | April 10, 2023

one CFW and some settings later, ready to rock and roll

For Flipper Zero - IR Blaster by Rabbit-Labs™

Whee! My first FZ module! Got it today, 8 days after ordering.

I had to wiggle the silicone case a tiny bit out of the way for the pins to seat all the way in the ports, but that was probably the biggest hurdle I had to overcome. :) (Well, I also had to install custom firmware, which wasn't that hard, either.)

In case any prospective purchasers are total newbies like me, I felt my way through these two items: Infrared >> Debug Settings >> Send signal to 2(A7) (instead of Internal) and GPIO >> 5V on GPIO >> ON and the blaster's green LED illuminated immediately, so I'm ready to remotely-control my brother's toilet from under the bathroom door. :)

(Looks like Settings >> Power >> Power Off flips the aforementioned settings to default values, so if you're a power-off FZ owner, you'll have to change those after each power-on, it appears.)

Bruno | April 8, 2023

Well built, works and fits great

For Flipper Zero-CC1101 Expansion Board - Rabbit-Labs™

Very well built board, uses capacitor to smooth the power to the module on connection to flipper. Takes a variety of CC1101 modules. I soldered a dual row 8 pin header on it so I can easily replace the modules
Page 5 of 6
Cookies help us deliver our services. By using our services, you agree to our use of cookies. Learn more.