Tindie

Avatar

TheFlamingo

823 orders since Jul 26, 2021

Utrecht, UT, Netherlands

Custom Work Available

View Store

Overall Rating:

Review Breakdown

5
42 4
11 3
0 2
0 1
0

Average Ratings

Product: (5.00)

Documentation: (4.81)

Shipping: (4.92)

Communication: (4.91)

All Reviews

Martijn | Oct. 15, 2022

Prima om de standaard duco smart te maken

For Open AIR Mini V1.4.0

Goed initiatief en snelle verzending.
Ook duidelijke communicatie bij verzending, met notie voor hoe te installeren van extra sensor.

Documentatie op site is wat verspreid, voor hard en software.
Na instalatie herkent HomeAssitent het direct als ESPhome, met alle controls en sensoren.

Yeri | Aug. 31, 2022

Received and working as intended

For 10x Xiaomi Air Purifier New Filter NFC Sticker

Xiaomi purifier back to 100% after being at 0% for 6+ months now ... Just peel off the old NFC tag (use a pen knife or sharp nails, and stick a new one in the middle). I assume each tag will give you ~1 year of extra life to your filter.
yay!

Szymon | July 11, 2022

Highly recommended

For Xiaomi Air purifier 2S/3H/PRO MOD (NO NFC MOD)

This is my second modchip. First one was mounted inside XAP 3H, second one in XAP 2S. Both work the same and as expected. Percent value gets reset to 100% every AP reboot, so if these devices are used within Home Assistant it is recommended to off/on the device when the counter gets close to 0% to prevent unnecessary warnings about filter replacement.
As for the SET adapter - I recommend thinking twice before mounting it. For example on both of my 3H and 2S PM2.5 sensors are accurate and never get stuck at 1ppm values. On the other hand using SET adapter may degrade sensor lifetime.
Avatar
Response from TheFlamingo | July 11, 2022
Hey Szymon,

Thanks for your kind words! it's highly appreciated.

Hamidreza | May 27, 2022

Highly recommended hardware for controlling home ventilation

For Open AIR Mini V1.4.0

I had a great experience with this product. The installation went really smooth and I could integrate it with home assistant instantly.
He is a really nice guy too, he personally delivered the product to me when PostNL failed to do it ;-)
Avatar
Response from TheFlamingo | July 11, 2022
Hey Hamidreza,

Thanks for your kind words! it's highly appreciated.

Ali | May 11, 2022

Good quality, easy to install and works better than original

For Open AIR Mini V1.4.0

He shipped really fast and communication with him was good. He helped me through. Once I received the package I was happy with the quality, the installation was easy.

Don't overthink and get one of these and make your good quality Duco smart!

Also, integration with HomeAssitant was quite nice.
Avatar
Response from TheFlamingo | July 11, 2022
Hey Ali,

Thanks for your kind words! it's highly appreciated.

Alexandru | March 29, 2022

Works as expected

For Xiaomi Air purifier 2S/3H/PRO MOD (NO NFC MOD)

Fast shipping. Arrived in about a week.
Installation of the mod chip on a pro h was almost like in the instructions. The cable which connects to the board seems to be a few mm shorter than needed but i pulled on it a bit and managed to connect it.
I also bought the 001ppm board. That was a little trickier to install. With the purifier upside down i removed all the screws from where the top of the filter goes and this allowed me to pull the panel where the sensor is located. Now there is enough room to access the connector on the sensor.
I've got photos taken of both installs if anyone needs them.
Thanks for the great mods!
Avatar
Response from TheFlamingo | July 11, 2022
Hey Alexandru,

Thanks for your kind words! it's highly appreciated.

Willem | March 25, 2022

Super happy to control my Duco via Home Assistant

For Open AIR Mini V1.4.0

Via a forum I read about the Open Duco. I was searching for a way to control my Duco via Home Assistant. Open Duco is the perfect solution! Very easy to install in the Duco box and also to install in my home network. I'm super happy with it! :-)
Avatar
Response from TheFlamingo | July 11, 2022
Hey Willem,

Thanks for your kind words! it's highly appreciated.

László | March 18, 2022

Works like a charm.

For Xiaomi Air purifier 2S/3H/PRO MOD (NO NFC MOD)

Easy to install, and works straight out of the box, without any hassle. Can only recommend. The gift air filter wrapping was a nice surprise for me!
Avatar
Response from TheFlamingo | March 19, 2022
Hey László,

Thanks for your kind words! it's highly appreciated.

Károly | Feb. 22, 2022

Perfect

For Xiaomi Air purifier 2S/3H/PRO MOD (NO NFC MOD)

Thank to The Flamingo!

The Modchip is working like a charm (2S model). Following the description was easy. It was also very easy not to get electrocuted :)

Great work!!!

Like I "said" in the summary: Perfect

Regards

Karoly
Avatar
Response from TheFlamingo | March 19, 2022
Hey Karoly,

Thanks for your kind words! it's highly appreciated.

Tobias | Feb. 15, 2022

Very happy with this MOD-Chip!

For Xiaomi Air purifier 2S/3H/PRO MOD (NO NFC MOD)

The installation took me 15-20 minutes and is easy to do. The chip works perfectly! Thank you very much for the extra filter :-)
Avatar
Response from TheFlamingo | Feb. 15, 2022
Thanks, Glad to hear :D

Jerlijn | Jan. 4, 2022

Great mod with easy installation and good value for money.

For Xiaomi Air purifier 2S/3H/PRO MOD (NO NFC MOD)

I bought the Mod for my 3H Xiaomi Purifier unit. Received this within a few days time and with the online guide the installation was easypeasy to do. It took me 20 minutes max. After the Modding turn on the Air purifier and yes.... 100% filter remaining with a used filter that was still okay to use but was blocked by the nfc sensoring and time based calculation.

David | Nov. 15, 2021

Easy and useful mod to make your Xiaomi Air Purifier useful!

For Xiaomi Air purifier SET adapter

Great mod, especially the detail of the connectors, which are perfect match for the originals.

The Pro has a different panel for the sensor the clip is on the bottom edge of the door and just press up and rotate the bottom out. It's not released from inside the filter chamber.

You will find however, that on the Pro, it's harder to install because the sensor mounting screws are blocked by the panel opening, but that's no fault of the mod. You are probably going to end up dropping the screws and have to tilt and shake to get them to fall out the panel opening. I used narrow jaw long nose pliers to replace the screws and used a smaller screwdriver than I would otherwise, to be able to address the screws at an angle. All told, even fussing with the screws and shaking the air cleaner like a maraca, maybe 10 minutes.

[Fair disclosure, I was provided the mod free, because I was The Flamingo's first customer and agreed to provide feedback on the install process as a owner of the Pro model, which is subtilty different. Thank you, The Flamingo!]

Oscar | Nov. 11, 2021

Above and beyond - wholeheartedly recommended!

For Xiaomi Air purifier 2S/3H/PRO MOD (NO NFC MOD)

The process of ordering and getting the device delivered was super-smooth, and I was delighted to
get a nice filter to add to my air purifier as well.

Installation was very straight-forward with the provided documentation, and the device performs
exactly as expected.

All in all, I can whole-heartedly recommend this device, and this store!
Avatar
Response from TheFlamingo | Nov. 11, 2021
Hey Oscar,

Thanks for the review! Happy to hear everything went this well!

Jeroen | Oct. 31, 2021

Back in control of changing the filters.

For Xiaomi Air purifier 2S/3H/PRO MOD (NO NFC MOD)

Installation was very simple and easy to do. Mod chip does what it promises and after installation the air purifier sees a filter placed like new. Communication was smooth and friendly. Highly recommend!
Avatar
Response from TheFlamingo | Oct. 31, 2021
Hey Jeroen,

Thanks for your kind words! it's highly appreciated.

Thomas | Oct. 11, 2021

Working good!

For Xiaomi Air purifier 2S/3H/PRO MOD (NO NFC MOD)

My modchip came to me today.

I have installed it in my "Xiaomi Mi Air Purifier Pro" and it worked perfectly fine.

Many thanks!

Best regards Thomas
Avatar
Response from TheFlamingo | Oct. 11, 2021
Thank you for your kind words & your trust ^^

Don | Sept. 30, 2021

All too easy, and thanks for the extra piece of filter!

For Xiaomi Air purifier 2S/3H/PRO MOD (NO NFC MOD)

Such a simple and straight forward hack. Love it.
Delivery was fast given COVID courier issues these days.
Documentation was good.
Now I can extend the life of my filters because the life SHOULD be based on the volume of bad air - not time alone!
Avatar
Response from TheFlamingo | Oct. 11, 2021
Thank you for your kind words & your trust ^^

Max | Aug. 31, 2021

Unnecessary filter replacements belong to the past now!

For Xiaomi Air purifier 2S/3H/PRO MOD (NO NFC MOD)

Great mod for my Xiaomi Air purifier. Shipment was really fast and the mod was easy to install. Most importantly: it works! No more unnecessary filter replacements. Better for the environment and also for my bank account :) Thank you, The Flamingo!
Avatar
Response from TheFlamingo | Oct. 11, 2021
Thank you for your kind words & your trust ^^

David | Aug. 18, 2021

Switch from PerriAir to Air on Your Terms!

For Xiaomi Air purifier 2S/3H/PRO MOD (NO NFC MOD)

Easy install, just a few screws and replaces the original RFID reader cleanly. No problems whatsoever, and The Flamingo was easy to communicate with through the entire process. A good investment for Xiaomi owners to control their filter costs on their own terms!
Avatar
Response from TheFlamingo | Aug. 18, 2021
Thanks! glad to hear everything is working perfectly (y)

Koen | July 28, 2021

Works Perfectly

For Xiaomi Air purifier 2S/3H/PRO MOD (NO NFC MOD)

I bought a Xiaomi NFC filter MOD.
The guy was really friendly and responded to my emails very quickly! he told me I was the second person to buy one!

I would deff recommend!
Avatar
Response from TheFlamingo | Aug. 18, 2021
Thanks! glad to hear everything is working perfectly (y)
Page 2 of 2
Cookies help us deliver our services. By using our services, you agree to our use of cookies. Learn more.