Anthony | June 2, 2023

Great module to play with!

For Mayhem v1 for Flipper: Wifi/Camera/SD/NRF24-CC1101

I got this in with in 2 weeks, came in perfect condition. I had some issues with the firmware but Erwin responded the same day. The most challenging part I found was holding and letting go of the reset button the right way so that it could accept firmware. If your not savvy, pay the extra to have erwin preload the FW. I personally like a challenge tho and spent 6 hours fiddling with it until completion.

Response from Erwin Ried | June 2, 2023

Hey Anthony, yes! I am pretty sure it felt good to finally figure out the secret of the reset button ✨

Joakim | May 30, 2023

Great product, and support.

For Mayhem v1 for Flipper: Wifi/Camera/SD/NRF24-CC1101

Amazing quality, easy instructions for assembly. Good support and communication with seller.
I had some problems with delivery but that had nothing to do with the seller or the Norwegian Post, it was the Swedish post service and that it got stuck in customs. I had to pay a tax of 72 SEK and a fee of 75 SEK so a total of 147 SEK to get it from customs.
Just so that you know if it takes time to get it in Sweden it might be stuck in customs. It took almost a week before I got a message that it was stuck in customs.

All in all a great product, everything I expected. Easy to assemble and great support and communication with Erwin.
Would shop again and refer anyone to do the same.

Best Regards
Joakim

Response from Erwin Ried | June 2, 2023

Thanks Joakim! funny that took so long being so near :/

Logan | April 11, 2023

Excellent documentation and communication.

For Mayhem v1 for Flipper: Wifi/Camera/SD/NRF24-CC1101

Erwin is great, I spent a lot of time trying to figure it what was going wrong with my board and it turned out to be something very simple…

Regardless of whether your Flipper Zero has a case on it, the Flipper Zero and the Mayhem board should rest flat against each other.

Erwin's Github mentions a known issue of there being an extra ground on some ESP32 modules. If you get your ESP32 module from Erwin, then your ESP32 module should not have this issue (even if you test it and find a 7k ohm difference between the "extra ground" and the other grounds).

The Web Installer should work, if it doesn't work, then you should reach out to Erwin and send him a video of the exact steps you are following when you try to use the web installer.

I created a support piece for the NRF24L01 and NRF24L01+PA+LNA modules, I've made them freely available here: https://www.thingiverse.com/thing:5960217

Response from Erwin Ried | April 11, 2023

Thanks for the review! And the model :) good that you got it working perfect at the end

Geovonnie | April 7, 2023

Excellent!

For Mayhem v1 for Flipper: Wifi/Camera/SD/NRF24-CC1101

Great product, great service. Fast shipping. Very helpful. I would definitely recommend. Will definitely purchase from again in the future.

Response from Erwin Ried | April 7, 2023

Thanks for the feedback, Geovonnie!

João Pedro | March 28, 2023

Very good product, reliable documentation & friendly seller

For Mayhem v1 for Flipper: Wifi/Camera/SD/NRF24-CC1101

Purchased this item and expected it to be all soldered but was surprised when i received it and found its all modular.

All was better then i expected and was even offered a little chocolat from Norway as a thank you for my purchase!

If you wanna complete your flipperzero, Erin is the guy you are looking for.

All came very well packaged and in perfect conditions.

I'd purchase it again if i had the need to. Totally recommend

Response from Erwin Ried | March 29, 2023

You can select modular or soldered in the options when ordering :) and chocolate/candy is just luck, I hope buyers do not feel left out if they dont get anything extra 😬

Thanks for the feedback Joao!

Steffen | March 19, 2023

Tolles Teil

For Mayhem v1 for Flipper: Wifi/Camera/SD/NRF24-CC1101

Der Versand war zügig und Erwin stand für mehrere Fragen immer zur Verfügung. Sehr netter Kontakt.
Das Board an sich hält, was es verspricht.

Vielen Dank!

Response from Erwin Ried | March 20, 2023

Danke Steffen 😌

Zoltán | March 4, 2023

You'll love it

For Mayhem v1 for Flipper: Wifi/Camera/SD/NRF24-CC1101

So: the thing does what it advertises and the maker does way more than expected to help figure out and iron out any problems that may occur.
Highly recommended, and (especially) EU people are lucky to have it available.
***** <--- that is five stars!

Response from Erwin Ried | March 4, 2023

Thanks a lot for the kind review Zoltán! Enjoy!

Rob | March 2, 2023

Nice hat!

For Mayhem v1 for Flipper: Wifi/Camera/SD/NRF24-CC1101

Very nicely designed! I cannot believe that it made it across the pond as quickly as it did. Thank you for your service and I cannot wait to see what fun can be had with it. I was thrilled to be able get hold of one.

Response from Erwin Ried | March 2, 2023

Thanks Rob!! I also hope you start having fun with it :D

Adam | March 1, 2023

10/10 I WILL be buying here again

For Mayhem v1 for Flipper: Wifi/Camera/SD/NRF24-CC1101

Amazing that arrive so quick! Woah. I am stoked. This is so well done. I did my research and it’s by far away the best one out there. Thank you for the Mayham and your service.

I will keep an eye out for whatever comes out next

Takk!!

Thanks,
A Storms Coming LLC

Response from Erwin Ried | March 1, 2023

Awesome! Very happy that you liked it. Join the repo! let's add more features for the little camera :)