Great seller and great item! Nick was very responsive to any questions I had, and was a pleasure to deal with :)
Item exceeded my expectations. Will probably by more in the future.

D | Oct. 7, 2024

Bought a few to test and play with

For 13.56mhz Field Detecter's/Repeater Locator

Green is usually the most susceptible to human eyes so that was my #1 color choice to grab. Then Blue leds being more rare then white or red, and often slightly harder to power. Then I bought a red.. The red was the most responsive, than green, and Blue appears to have gotten damaged in shipping. Hamspiced (Nick), had a new one on way promptly, was very apologetic, I told him it was no worry - we have all had a USPS problem or 40. New one worked perfect!

For my purposes I wanted the different colors for doing teaching sessions about RF with other coworkers and students, and just how technology out there helps closer to define how far a device advertised (at a very specific frequency). I think they are very well made, colors help keep track whom has which ones, and all other ones tested and working great.

Nick's interactions and quality of item would definitely make me look for future products by him.

D | Oct. 7, 2024

Bought to learn about the nature one can amplify passively

For 13.56Mhz NFC Amplifier V2 Large and V3L Passive

Was not disappointed, just about doubled the range in my tests. Amazing communication, super friendly transactions. Highly recommend purchasing from.

Brian | June 22, 2024

Perfect for placing the repeaters.

For 13.56mhz Field Detecter's/Repeater Locator

These blinky LEDs are great for finding NFC fields and their strength. When used on a phone, they can help locate the strongest area of the antenna (which often is not where you would expect by looking at a teardown). They are also good for finding the best place to use an NFC repeater (which is likely different from the strongest part of a field). Use an blinky to find the area near where you want to scan, move it around until you get some activity, hold it away from the phone, then start moving the repeater around until you find a location that causes the LED to start blinking again.

Martin | June 10, 2024

Simply Amazing

For 13.56Mhz NFC Amplifier V2 Large and V3L Passive

"How could this possibly work?" Just get one. Using a USB NFC reader on the PC, scanning my Apex implant usually beeps at around 1/4 inch. Using this on top of the reader it scans nearly 1 inch away. With this laying on top of my implant it scans at about 3 inches away.

Martin | June 10, 2024

These are amazing

For 13.56MHz NFC Amplifier/Repeater Small V2.1s

Used the 13.56mhz Field Detecter to find optimal placement for FlipperZero under it's case. I have an xM1 and NeXT implants, ranges increased from basically skin contact to about 1cm and no longer need to be exactly in the right area to pick it up, just have to be close. Also my xLED install was too deep in the knife edge of my hand and I havn't been able to scan it with the Flipper until now. Now it lights up about 1mm away.

Martin | June 10, 2024

Works great

For Flipper Zero RGB Mod

Ordered a few weeks ago, install went fine. Just go slow and take your time. Watch the installation video a couple times so you have a good idea of what you're doing.

Z | May 21, 2024

amazing customer service!

For Flipper Zero RGB Mod

Ive yet to hook it up but tested each unit all do what is supposed to! highly recommend the pads in alot better of a place then alot of other mods on the market rn!

Nick | May 21, 2024

i broke my shit

For Flipper Zero RGB Mod

Tried soldering my negative to the board for the life of me couldn't get eh solder to stick an burnt the board don't hold this to the manufacture it was my fault buying 3 more to hopefully getting one of these to work just be careful

Steve | May 18, 2024

Honest, nice, trustworthy- with nice products

For 13.56Mhz NFC Amplifier V2 Large and V3L Passive

This seller is transparent and very helpful. A fantastic product and I wouldn't hesitate to order again.

Thank you!

Konstantin | May 3, 2024

Very communicative

For Flipper Zero RGB Mod

Very nice upgrade.
Had problems at first because of my new device model, but hamspiced updated his instructions and now everything is fine.

Jordan | March 30, 2024

10/10

For Flipper Zero RGB Mod

Fast shipping and delivery, the RGB board is perfect, got it installed and running. I will be back for more! Thank you!

Christopher | March 1, 2024

My phone can read NFC SO MUCH more effectively now!

For 13.56MHz NFC Amplifier V0.1

The circuit works fantastic! I attached it to my phone case and now my phone reads NFC so much more effectively! There were some devices that I could barely read with the case off, but now, even with the case on, it reads with ease.

Casey | Feb. 3, 2024

Great flipper RGB Board!

For Flipper Zero RGB Mod

It is nice that this board has the pad in the center instead of the edge like other boards. It fits perfectly and installation was as easy as it could be. Xtreme firmware got the backlight up and running in no time. I recommend soldering to gpio ground instead of the ground pads in the one guide - much easier. The RGB transparent Flipper is a beautiful sight!

Tindie

Midwest Gadgets LLC

Overall Rating:

Review Breakdown

Average Ratings

All Reviews

Amazing

Bought a few to test and play with

Bought to learn about the nature one can amplify passively

Perfect for placing the repeaters.

Simply Amazing

These are amazing

Works great

amazing customer service!

i broke my shit

Honest, nice, trustworthy- with nice products

Very communicative

10/10

My phone can read NFC SO MUCH more effectively now!

Great flipper RGB Board!