Josh | Feb. 23, 2016

great for prototyping the Teensy!

For Teensy 3.2 Breakout (Revision A)

This is a great board for easily prototyping/breadboarding your teensy -- some of the pins are not easy to get to, especially on a breadboard. this is well thought and easy to implement. Excellent communication & post sales communication.

Response from Tall Dog | Sept. 1, 2016

Josh, thanks very much for leaving a review here! Much appreciated.

John | Dec. 23, 2015

great product, good communication

For Teensy 3.2 Breakout (Revision A)

The Teensy breakout board makes it much easier to prototype with the Teensy. I have just experimented enough to verify everything works, but I plan to hook it up to a Mercury FPGA board (for high-speed quadrature decode and other sensor aggregation) and a motor controller, and being able to prototype things on a breadboard will make getting it working much easier.

Response from Tall Dog | Sept. 1, 2016

Yup, this is exactly why I made these boards in the first place. Good luck with your projects John!

Ralph | Dec. 15, 2015

Excellent quality

For Teensy 3.2 Breakout (Revision A)

I've purchased both the assembled board with a Teensy 3.2 already on it and I've purchased the kits. The documentation and the quality of these breakout boards is super!

Response from Tall Dog | Sept. 1, 2016

Thanks Ralph, you're super!

Samuel | Dec. 13, 2015

Must have for Teensy

For Teensy 3.2 Breakout (Revision A)

Great breakout for the Teensy. Customer service provided by the seller is excellent. Stands by product and is quick to answer any questions. Would like to see this board combined with the audio shield. But for now, this does the trick. You really don't realize how many pins the Teensy has until you get one of these.

Response from Tall Dog | Sept. 1, 2016

Thanks for leaving me a review Samuel. I always try to answer messages promptly! However, I guess that isn't always the case when it comes to me leaving review responses...

Alan M | Nov. 3, 2015

Thank Goodness this product exists

For Teensy 3.1 Breakout

The Teensey is truly that.. so it is not going to work on a standard breadboard setup by itself. This adapter board (and associated parts) allows for having a Teensey you can get to all the pins on, AND works perfectly on breadboards.

The directions are very clear and include detailed drawings step by step. Everyone should provide directions this good! The Board Layout is clearly well thought out and although it takes a bit to put together with lots of soldering it is not difficult. The silkscreen is clearly marked and the board also comes with a Pinout Diagram showing the Teensy and it's relationship to the pins (in the same style as the Pinout Diagram from Teensy itself).

I ordered mine with the full parts kit which includes the headers and the Pogo Pin etc. Added on the Clock Crystal, Switch, and USB Host Capacitor as well. All of the optional parts were excellent.

I'm a Very Happy Camper

Response from Tall Dog | Sept. 1, 2016

Thanks for leaving this great review Alan! The Teensy is a prototyping/development board, after all, and so I think the instructions need to accommodate a wider range of experience levels than the average datasheet. When I was starting out with electronics, I was often frustrated by the assumptions that many product manuals would make about my proficiency. In general, I'd like to see documentation reflect a greater respect for beginners and professionals alike.

Jared | Oct. 8, 2015

This thing is awesome.

For Teensy 3.2 Breakout (Revision A)

This thing kicks ass, it makes the Teensy 3.2 much more usable. Next time i get one of these i'm going to get the assembled version for ease.

Response from Tall Dog | Oct. 9, 2015

Thanks, Jared!

Florian | Aug. 5, 2015

:-)

For Teensy 3.2 Breakout (Revision A)

Very useful pcb for the teensy, which can be even configured before purchasing
shipping to Europe (Austria) was very smooth.

Response from Tall Dog | Sept. 18, 2015

Great to hear. Thanks!

John | June 19, 2015

Fantastic Arduino!

For Teensy 3.2 Breakout (Revision A)

I think the Teensy 3.1 is a great Arduino for a great price. It's fast, has lots of memory, better analog capabilities, and good documentation.

My only complaint is the actual form factor of the pinouts themselves. I want all the pins broken out along the two long edges, not folded inside the PCB or accessible via a soldering pad on the bottom. I shouldn't need to purchase a separate "breakout" board just to get easy access to all the pins. Perhaps Teensy 3.2?

Response from Tall Dog | June 20, 2015

I understand your frustration! Why not send your thoughts over to PJRC too? Let them know how you feel. Since I'm not the designer of the Teensy boards themselves, these things are beyond my control. Anyway, this is why I made the breakout boards/kits in the first place.

Akop | June 16, 2015

Hard to imagine the Teensy without it

For Teensy 3.2 Breakout (Revision A)

This is a great little breakout board - my only gripe is that the documentation asks that I only tack a few of the right-angle pins. The first time I tried that, half of the bottom pins failed to connect. Second time I soldered every single pin, and that worked great.

Other than that, the quality is excellent and the documentation is great - includes a handy card with all the pinouts.

Response from Tall Dog | June 17, 2015

Thanks for the great review! In regards to the instructions: Step 3 has you tack the header in place to check for proper alignment, but the following section (Step 4) does in fact instruct you to solder all of the pins onto the board. You're absolutely right though, this step is very important so every pin makes solid contact.

Chris | April 24, 2015

Just What I needed!

For Teensy 3.2 Breakout (Revision A)

Just assembled my first of two breakouts. I have a project requiring the second i2c bus and this was perfect (I ruined one teensy trying to hack some pins onto the bottom already). The instructions along with super clear drawings made assembly a cinch. I added the DIP switch for flexibility in powering the device as well. Very well done!
PS I would pay a couple more bucks for a handy reference card for the pins like paul makes.

Response from Tall Dog | May 17, 2015

Chris, thanks for the awesome review and the photo! I've just added a pinout diagram too, take a look at the product photos above. All new orders will ship with these cards!

Matthew | April 15, 2015

Great transaction

For Teensy 3.2 Breakout (Revision A)

Just received this today and the shipping was super-fast. Communication and documentation are great too. I'll be putting the kit together in the next few days. Thanks!

Response from Tall Dog | April 23, 2015

Thanks for the note!

Andrew | April 13, 2015

A+ Product

For Teensy 3.2 Breakout (Revision A)

Very highly recommended. Shipping was fast, and the product is awesome. With this breakout board, my Teensy3.1 became an even more powerful animal. Thank you!

Response from Tall Dog | April 23, 2015

You're welcome!

Asgeir | Nov. 25, 2014

I love it

For Teensy 3.2 Breakout (Revision A)

This makes the teensy so much easier to use.

When assembling I would recommend cutting the leads as late as possible so they can help with any alignment issues.
One change I would love to see is a jumper between Vusb and Vin so the trace can be cut before soldering but still easily connected again if needed.

Response from Tall Dog | March 30, 2015

Thanks! Take a look at the new C revision of the board. It includes an (optional) DIP switch between VUSB and VIN.

Nicholas | Nov. 10, 2014

Excellent Product, Quality Assembly (for Non-Kit Version)

For Teensy 3.2 Breakout (Revision A)

Excellent Product, Quality Assembly (for Non-Kit Version)

Response from Tall Dog | March 30, 2015

Very much appreciated.

Robert | Nov. 9, 2014

Best Ever

For Teensy 3.2 Breakout (Revision A)

This is the best ever B.O.B for What is the best EVER Arduino compatible board..

Response from Tall Dog | March 30, 2015

Thanks very much!

Paul | June 19, 2014

Excellent

For Teensy 3.2 Breakout (Revision A)

A very good quality board that provides easy access to all of the teensy's pins.
It comes with all the needed header pins and mounting screws.

Response from Tall Dog | June 19, 2014

Thank you for taking the time to add a review!

Norman W | April 10, 2014

Great product to bring out bottom pins

For Teensy 3.2 Breakout (Revision A)

Provides all the necessary pins to attach the Teensy 3.0 or 3.1 to breakout board. This includes the pins for the 14 pads on the bottom of the board. Just don't forget to add the 32.768 KHz Crystal - cut the pads for power and add the 150 uf capacitor, prior to attaching the Teensy to the breakout. This breakout board brings the second I2C port out to the breadboard pins (as well as the other functions).
I would recommend one change to the assembly instructions: take on of the 5-pin lengths of through-hole headers from step three and solder then into the end of the teensy prior to step one. And after tacking the 14 pin header (prior to soldering all the pins) insert into the breakout board to check alignment.

Response from Tall Dog | April 17, 2014

Thanks so much for the positive review. I've changed the instructions, taking your suggestions into account. They'll be updated once the boards are revised to support the RESET test point. The new instructions have drawings too! -Dan

Pranav | Sept. 11, 2013

Good man

For Teensy 3.0 Breakout Mark II

Fast shipping, works as advertised. Though I replaced the supplied header pins with taller ones to make sure the Teensy could be soldered to the breakout board as the SMD pins for the bottom end up being taller than the supplied header pins.

No problem otherwise. Cheers.

Response from Tall Dog | Dec. 27, 2013

Thanks for the positive review!