Peter | Nov. 6, 2021

Nice little clock

For Retro Clock with 2 HPDL1414 LED Displays

Well made compact little clock.

Due to the led display and the small battery it only runs for handful of hours before needing a recharge.
Because of this I leave it plugged in but this means that the bright recharging led turns on. I've placed a tiny bit of tape on the front to cover this led up as it shines quite brightly in the dark.

How about adding a countdown function including a tenths of a second display for that Hollywood Clock of Doom effect.

Response from Phoenix CNC, OLEDiUNO | Nov. 6, 2021

Thank you for your reply Peter, greatly appreciate it.

Should really use a larger resistor to dim down the charging LED, piece of black tape helps as well of course.

The code got a bit on the large side and with all the different alarm functions. I initially thought about a timer as well.

But, I am working on a Kitchen timer based on the wonderful Nixie tubes, maybe it will be something of interest to you. As the code is still in the works, I am open to suggestions and ideas :-) and if you end up ordering it, just remind me and I make the charging LED dimmer, could even replace it by a IR Led, for the stealth look.

Anyway, have a great weekend.

Regards,
Hayri

Hari | Oct. 9, 2021

Good Product, But need some improvement

For OLEDiUNO Spectrum Analyzer with 3 display modes

I liked the product. But there is a need for gain control. Without gain control it is of little use.....

Response from Phoenix CNC, OLEDiUNO | Oct. 9, 2021

Thank you for your review. This spectrum analyzer is set up for pre-amp levels as most are. If you need it to work with lower levels you can just and a small pre-amp module sold for a few bucks to gain volume. They do come with 3.5mm jacks so it will be a simple hockup.

Regards,
Hayri

Ludger | July 14, 2021

A very nice and usefull piece of hardware

For 6 Key Macro Keypad with Rotary Encoder and Display

I like this keypad very much, it is very good made and has some special features i din't find in any other keypad. I am going to customize the firmware to my needs (Davinci Resolve editing). The documentation of the arduino software is good but there is a little bit room for improvement. I like it very much and my oldest son also, perhaps i have to buy a secondone for him too.

The device is worth each euro.

Thanks for your creativity and sharing your ideas on tindie.

Greetings from germany.

P.S.: the shipment was quicker than i expected!

Response from Phoenix CNC, OLEDiUNO | July 14, 2021

Thank you very much for your review Ludger, greatly appreciate it.

Looking forward to your version of the code and will definitely put a link to your Github here as well.

Happy coding :-)

Regards Hayri.

Lloyd | June 21, 2021

Very nice for small projects

For Phoenix PNP SMD Tray for 8, 12 and 16 mm Strips

I find it great for organizing small projects using SMD, even without a PNP machine.
My products only have a few chips, and I make them in batches of less than ten.
So I leave the components in one place on this board, one board for each project.
I use a vacuum pen.

This product solves the problem that when you pull the cover tape off a strip,
the parts are prone to jump.
Also, if you uncover a few parts, then bump a strip, the parts spill out.
Then you must reorient the parts.
This board holds the tapes securely in place.
While you are uncovering a strip, the parts stay in place.
Even if you bump the board, the parts usually stay in place.

The low price is an advantage.

You can also write on the black boards with a pencil, to identify parts.

Its not clear to me which product to order, why you would want a white background of different widths.
Its probably obvious to someone with a PNP machine.

One problem is that the holes are not tapped.
You need to adjust the height of the screws to accommodate different thicknesses of tapes.
Self-tapping screws probably work, but I tapped the holes.

I wish the product shipped with screws.
I used ordinary screws salvaged from PC cases.
Their head might be too wide.
That makes the cover tape a little tricky to pull off a little at a time,
when the cover tape is pinched by a screw.

Response from Phoenix CNC, OLEDiUNO | June 21, 2021

Hi Lloyd,

Thank you for your review and new order as well, greatly appreciate it.

Even though I started to build a PNP machine but never got around to finish it, I am using these trays too. They do have all advantages you listed, one thing I have not yet solved for my personal use is how to stack them on top of each other, maybe a male/female standoff could be adapted, will see.

As for your concern about the holes not tapped, actually they are chosen with the right diameter to use a M3 screws and tap it with the screw itself. Since the screw is stronger and the PCB substrate it goes real easy. I am doing this with all my PCB's that use screws because if you use a tap, the holes end up too loose, this way they stay tight and the screw does not loosen itself and keeps the strips in place.

As for the white strips, the reason behind that is that you might have white paper strips and black plastic strips which will help vision supported PNP machines to see the components with a better contrast. Black strip on white background and the other way around.

As a token of my appreciation I will send you some screws with your new order.

Thanks.

Hugo | May 18, 2021

Great product, thank you Hayri!

For Tiny Stand Alone Atmega328 Bootloader Burner

A great tool for everyone who works with Atmega328P chips regularly. The bootloader burner is way smaller than I expected, so that is another advantage to choose it. Hayri was also very friendly, he sent me a mail with an instruction video a few hours after I ordered it. Documentation is good with clear instruction videos. Shipping took a bit longer than expected, but luckily I didn't need it very quickly. I can really recommend this product to you!

Response from Phoenix CNC, OLEDiUNO | May 18, 2021

Thank you so much Hugo for your great review, I greatly appreciate you taking your time to write it.

I am sure it will serve you for many years to come, take care and stay safe.

Regards, Hayri

Alex | April 30, 2021

Fantastic! Super cute and accurate GPS device!

For OLEDiUNO GPS Cube

I opened the packet and switched it on. Even in my home it connected to the appropriate satellites within a minute. Good quality components, thoughtfully put together combined with well written software. What's not to like. I got the blue/yellow screen with 3d printed enclosure so is super cute. Get one!

Response from Phoenix CNC, OLEDiUNO | April 30, 2021

Thank you Alex for taking the time to write your great review. I greatly appreciate it. Enjoy your GPS :-)

Hayri

Eagle | Jan. 28, 2021

Super awesome macropad and unique!

For 6 Key Macro Keypad with Rotary Encoder and Display

I received my macropad (V1) in june 2020 and have been using it ever since . To change functions of the switches you have learn a little bit of Arduino IDE (coding) but it took me about 2 days to finally figure it out and was able to change some of the switch functions. The Neopixels for the RGB is very unique, i dont know who else is building macropads with neopixels but its super bright and the colors are nice. At the time, this macropad was priced at $75, some may argue that its too expensive for stacked acrylic but in my opinion it is well worth the price. You can tell this is a passion project by Hayri and I really admire the amount of time and effort he put into his builds. I'm glad I bought one to add to my deskspace and hopefully whoever reads this considers getting this macropad too. 5/5

Response from Phoenix CNC, OLEDiUNO | Jan. 29, 2021

Thank you very much for taking your time to write this great review.

Regards, Hayri.

Stefan | Nov. 16, 2020

super nice device - excellent creator and trader!

For 6 Key Macro Keypad with Rotary Encoder and Display

This is the second one of these I got from him (I already own the previous version) and it's an excellent little macro keyboard, and this version has sensible updates compared to the previous iteration. The videos give a great documentation. You see what you get.

Like last time the communication was quick and very nice. Production and shipping were immediate with excellent transparency and comprehensive documentation on the product too.
I even got help with troubleshooting two months after receiving it, when I first opened the package.

I have only the best things to say and encourage everyone to shop here!
Greetings from Germany! :-)

Response from Phoenix CNC, OLEDiUNO | Nov. 16, 2020

Wow, thank you so much Stefan, this must be the nicest review I ever received :-)

Apart from making some money so I can buy more parts and make new products and put food on the table, feed over 20 cats and 4 dogs, this is the best reward for anybody that creates something with passion, doesn't stop improving on his own design and be lucky enough that people like and buys his products.

Thank you again, also for taking your time and writing your review.

If I can be of any other help feel free to ask anytime, this also goes for any other buyer no matter how long ago it was.

Best regards, Hayri.

Alexandru | Aug. 30, 2020

Excelent Tiny Stand Alone Atmega328 Bootloader Burner

For Tiny Stand Alone Atmega328 Bootloader Burner

I am very satisfied with Tiny Stand Alone Atmega328 Bootloader Burner, I work fine, I like the design, it is an excellent design and perfect circuit.

Response from Phoenix CNC, OLEDiUNO | Sept. 3, 2020

Thank you very much for your review, greatly appreciate it.

Roberto | Aug. 5, 2020

Come da aspettative

For NEW Version OLEDiUNO Clock with Temp, Volt, Alarm

Durata della batteria, date le dimensioni, con display acceso buona. Necessita sicuramente della cover. Ottimo da utilizzare come orologio e sveglia da viaggio

Response from Phoenix CNC, OLEDiUNO | Aug. 5, 2020

Thank you for your review, greatly appreciate it.

Axel | June 17, 2019

Good Seller and great quality.

For Tiny Stand Alone Atmega328 Bootloader Burner

Good quality product and very nice seller, would buy from him again.
Easy to use and fast shipping too.

Response from Phoenix CNC, OLEDiUNO | June 17, 2019

Thank you for your review Axel, I greatly appreciate it.
Take care.
Regards,
Hayri

Kang | June 3, 2019

Wow, it's great.

For Tiny Stand Alone Atmega328 Bootloader Burner

The delivery was very fast.
This is a very convenient and highly productive tool.
Why didn't I think of this?

Response from Phoenix CNC, OLEDiUNO | June 4, 2019

Thank you very much for your review, greatly appreciate it.
And I am telling myself, why did I not make it sooner :-)

Regards,
Hayri

Denys | Jan. 30, 2019

Martin | Aug. 30, 2018

Gear Indicator

For OLEDiUNO Gear Indicator for Motorcycle or Car

I love my gear indicator , Hayri is a very good pacient man , help me with many question. Definitly will buy you again.

Response from Phoenix CNC, OLEDiUNO | Aug. 30, 2018

Thank you Martin, just replied to your question.
If you need any other helps just ask, I am here for you.
Hayri

John | Aug. 14, 2018

Valery | April 7, 2018

Excellent

For NEW Version OLEDiUNO Clock with Temp, Volt, Alarm

The clock was received, well packaged, it arrived in perfect condition!
Wonderful goods, I recommend it to everyone!

Response from Phoenix CNC, OLEDiUNO | April 7, 2018

Thank you Valery for your review, glad you like it :-)

Peter | March 24, 2018

Tracker does what it say's on the box

For Tiny OLEDiUNO GPS TRACKER / LOGGER

Outstanding piece of kit but you have to watch YouTube for instructions.
It really doesn't take much effort to put a note in the box with a brief outline of how to use it.
That said, it performs very well and I was able to load the track into Google Earth easily.
Exactly what I wanted at a good price.

Response from Phoenix CNC, OLEDiUNO | March 24, 2018

Thank you for your review.

Maybe I should put the description as printed paper into the box.

The video should be easier to understand so I thought, would not know how else to explain which way to put in the microSd card for example.

If you have any suggestions as to what additional info to supply with the product I gladly add it to the description.

Thank you,
Hayri

Alan | March 14, 2018

Johnathon | March 1, 2018

Thomas | Jan. 16, 2018

Good

For NEW Version OLEDiUNO Clock with Temp, Volt, Alarm

Uret kom som lovet, har mange funktioner, og er meget kompakt. lades nemt med mobil lader. Kan anbefales.
Hilsen Thomas

Response from Phoenix CNC, OLEDiUNO | Jan. 16, 2018

Thank you very much for your review. I translated it with Google and am posting it here if you don't mind :-)

"The clock came as promised, has many features and is very compact. Easy charging with mobile charger. Recommendable."

Olivier | Dec. 22, 2017

Amazing product.

For OLEDiUNO GPS Cube

I was surprised by the little size of the product, it's whorks very well and with im i have compared the difference between the smartphone GPS and your product the results for me the smartphone (S8 ➕) it's exactly the same speed and one more thing about your product, it faster than the smartphone.

The product was sending into a very good packaging, with a lot of protection for the product.
It's started very quickly and i love it, it's a beautiful objets, and with a very fast response.
Just after Christmas i will be the owner of a 3D printer, i will try to make a small box for it, like this, when you driving in the night they're is less luminosity of it.
For me it's a very beautiful object, very small and simple to use, you have gold in your hands, you can make so many little things, and they are not a gadgets, they are all a very good fonction.
Please continue to create some new products.
The only request i have to make, they are not a little paper for explaining the fonction of the product.
But if i take the time to watch your videos and try it on the product i hope have understanding, all i need.
I think is not the last product, i will buy to you.

Thank you very much for your great work.
One costumer, who is very proud and happy to have this product.

Response from Phoenix CNC, OLEDiUNO | Dec. 22, 2017

Thank you very much taking your time to write this wonderful review. I appreciate it very much.

Looking forward for the 3D design you come up with, please end me some pictures when it is ready.

I will also have some cases eventually that will go with the frames and the 1.3" display.

My next new product, the OLEDiTREK will be the top of all my work so far and even it is not released yet I made it even better by adding many new functionalities. Maybe it will interest you too :-)

You are correct, a little manual would be good, I just never got around to make one, but I will do so in the near future.

If you have any questions that I can help you with, please feel free to ask me anytime, I am always here for my customers :-)

I wish you Happy Holidays. Take care.

Michael | Nov. 17, 2017

OLEDiUNO GPS Cube

For OLEDiUNO GPS Cube

I bought this because of the compact form factor, quality of display and features, I wanted a quick solution to Track Heading and Ground Speed, that it could be positioned within the sight line allowing the information to be available with a quick glance.

So the chance to buy a complete unit with these features at this price point is impressive, while I investigated various components and kits I did not want to spend six plus months to bring it all together so this was a much better option.

Before ordering I had a couple of questions and the response was fast, I needed a slight change request instead of MPH use KTS which was confirmed so I placed an order.
The Item arrived very well packaged and on unboxing was impressed with the attention to detail and build quality.
On powering on it works flawlessly and the controls and functions are very intuitive I did have to check the YouTube video on how to change the time zone.

The screen option I chose was Blue and Yellow, the visibility in all conditions is very good, the quality is excellent and very legible.
Here is where the OLED comes in if In strong direct sunlight you angle slightly its perfectly legible.
Powering on the GPS unit acquires satellites quickly and was surprised that it worked in doors where my Garmin had not.
Moving between pages is easy with a flick of the side controller. all data speeds track alt are as you would expect very accurate.

The battery power is displayed and on my initial outing I used it continuously for a couple of hours and it was still going strong.
Recharging is simple.

What would I Improve - I would like to see a mode where the track bearing is displayed using the large format numbers.
Don’t forget this is Arduino based and packs a lot in already so if that came at the cost losing a page like time or trip personally I would.

Response from Phoenix CNC, OLEDiUNO | Nov. 17, 2017

Thank you very very much for taking your time to write this great review Michael, I greatly appreciate it.

I will try to implement your suggestion that you had in our messages. Maybe I can come up with a solution geared towards pilots as yourself.

Actually, I am thinking about a new PCB geared towards the GPS only. I do have a new GPS module on the way, that will also be used in the OLEDiTREK, that is smaller and uses less current.

That would give me also the opportunity to maybe add a temperature, pressure and humidity sensor along the GPS module while increasing battery life.

It is always fun for me to design a new PCB just takes time to do it and to wait for the PCB's to be fabricated.

Thank you again for your support.

Kind regards,
Hayri

Keith | Nov. 12, 2017

Fun Device

For NEW Version OLEDiUNO Clock with Temp, Volt, Alarm

This miniature clock is a marvel of imagination and engineering. Compact in size it nonetheless provides a wealth of information via it OLED screen. A must have desk accessory for those who enjoy smart, aesthetic design.

Response from Phoenix CNC, OLEDiUNO | Jan. 16, 2018

Hi Keith, don't know if you get a notification when I reply here but I wanted to thank you for your nice review. Hope you will have lots of fun with it.
Hayri

Danny | Aug. 28, 2017

Cool little product

For NEW Version OLEDiUNO Clock with Temp, Volt, Alarm

Bought this recently and absolutely love it. The display is very good, very clear, maybe a bit too bright as it will light up a whole room at night. :)

I wish it would come with source code, but other than that there's very little reason not to buy this awesome little cube.

Hard to improve upon this.

Danny

Response from Phoenix CNC, OLEDiUNO | Aug. 28, 2017

Thank you for your review, I greatly appreciate it.

As I mentioned in my other reply, my new product the OLEDiTREK will include a clock too that will have even more features among a timeout for the display and maybe even a dimming feature.

Regards,
Hayri

Ricardo | Aug. 8, 2017

Todo Perfecto!

For Phoenix USB CNC Controller with PWM Output

LLevaba un par de semanas pelando con smothieboard para hacerla funcionar en mi cnc, esta tarde abri el paquete con Phoenix USB Controller, y me voy a la cama con todo funcionando! :) realmente facil de utilizar y una placa muy bien construida!! solo falto una pegatina de su empresa para pegar en la maquina jeje!!

Un saludo muchas gracias!

Response from Phoenix CNC, OLEDiUNO | Aug. 8, 2017

Thank you so much Ricardo, this is really a nice review I enjoyed reading thanks to Google translate. I will post the translation here, hope you don't mind.

"""It took a couple of weeks peeling with smothieboard to make it work in my cnc, this afternoon I opened the package with Phoenix USB Controller, and I go to bed with everything running! :) really easy to use and a very well built plate !! I only miss a sticker of your company to stick on the machine hehe !!

Regards many thanks!"""

If I ever make stickers I make sure to send you some. As a matter of fact I even thought of adding a OLED display to the board just to show my CNC Mill Logo.

Thanks again.
Hayri

David | July 24, 2017

I love this little oled clock ...

For NEW Version OLEDiUNO Clock with Temp, Volt, Alarm

Recommended little compact Oled clock,shows time,date,temp,and a funky alarm system,with built in l.e.ds on each corner of the unit (you customise from the build before order,along with display colour of choice etc) . I went with the blue yellow oled display. And green blue l.e.ds. She is going to be used in a project of mine.

Response from Phoenix CNC, OLEDiUNO | July 24, 2017

Hi David,
Thank you very much for taking your time and writing this great review. Have fun with it. Maybe you can share a picture once your project is finished. Take care.
Hayri

Mark | July 11, 2017

Excellent product, shipping was well done

For OLEDiUNO Car Voltmeter

The item arrived in good condition. I connected the wires of the OLEDiUNO to my power source and the it fired up without hesitation. It's amazingly compact, you could put one of these just about anywhere. The most impressive feature is how BRIGHT and READABLE the tiny screen is! I would not hesitate to buy this product for future projects.

Response from Phoenix CNC, OLEDiUNO | July 11, 2017

Thank you very much Mark, for tacking your time and writing such a nice review. I appreciate it greatly.

Regards,
Hayri

Mark | July 11, 2017

Very useful tachometer that can fit in the smallest of space

For OLEDiUNO Tachometer for Spindles and Motors

I received the tachometers in good condition. I was a bit confused about the wiring at first and sent a question to Hayri, who responded right away and answered my question. I have a Sherline lathe and mill with 10,000rpm spindles and I've been looking for a economical tach for them. I have found my solution! These units are amazingly small and still manage to be very bright and readable. I tested them against my handheld tach and they were very accurate, they will also be much more useful than the handheld. Their small size will allow me to put them just about anywhere I want, nice feature in a cramped shop. I like the fact that you just apply power and it operates, no menus or garbage to bog it down.

Wishes:
I would like to see more detailed documentation. Is it possible to send the readings out the serial port? It would be nice to use the data in MACH4 or similar CNC packages.

Response from Phoenix CNC, OLEDiUNO | July 11, 2017

Hi Mark,

Thank you for taking your time to write the review.

To be able to read the data also serially my USB adapter would need to be attached permanently to the PCB.

Don't know about Mach4 but there is a code that can be used with Grbl and needs to be connected between the PC and the CNC controller.

You are right about documentation, I just never get around to write one for every product.

If there is anything else I can help with, please let me know.

Regards,
Hayri

Daniel | June 28, 2017

High quality and amazing product

For OLEDiUNO Police Light by Hayri

I bought this board to have a play and build upon with my own circuits.
The quality of this board is amazing, hayri's work is very good quality and to a high standard. The lights flash bright and the police strobe is a novelty, would work nice on a kids toy or a drone.
I've had many emails from hayri and he replies quick and concise.
Will be following his work closely and buying more from him in the future.

Response from Phoenix CNC, OLEDiUNO | June 28, 2017

Thank you very much Daniel, I really appreciate taking your time to write the review.

It's always nice to hear if people like my work.

Regards,
Hayri

Tyler | June 23, 2017

Incredible quality!

For Phoenix USB CNC Controller with PWM Output

The Phoenix CNC Controller has got to be the finest example of circuit board I've ever seen. The attention to detail and finish is really has to be seen to be believed. Fantastic work!
I gave less than perfect marks for documentation because none came with it and I have some questions as this is not exactly an Arduino board, for example, there are two for input voltage, but do I set them both to position 1 or 2? But, I'm sure I can clear this up easily enough. Can't wait to try it out!

Response from Phoenix CNC, OLEDiUNO | June 23, 2017

Thank you so much Tyler, I really appreciate your review.

And you are right I never got around to write a whole documentation. I will at least update the info on the product page.

Actually it is an Arduino board but more. I added multiple features not seen on other Arduino shields on the market.

You are correct with that both switches need to be set to 1 or 2. Setting to 1 is for power supplies of 12 volt and setting 2 is for power supplies up to 24 volt.

I will reply to your other questions directly.

Thank you again.

Hayri

Claude | May 4, 2017

Claude | May 4, 2017

Petr | Feb. 14, 2017

Excellent Spectrum Analyzer

For OLEDiUNO Spectrum Analyzer with 3 display modes

I bought dual (stereo) version of analyzer. It works perfect and looks excellent. Small cons - it is little bit problem how to mount it to front panel. But nothing serious.

(Shipping is only good because package was damaged. Fortunately Analyzer was very good packed.)

Response from Phoenix CNC, OLEDiUNO | Feb. 14, 2017

Hello Petr,

Thank your very much for being a very nice to talk to customer and for your review of course.

Sorry to hear that the package was damaged but good for us that there was no damage to the analyzer itself. I might need to use even stronger boxes from now on but maybe it was just a unhappy postal worker that had a bad day.

Anyway have fun with it and if you have any ideas for improving it please let me know. Thanks

Kind regards,

Hayri

Corné | Jan. 19, 2017